Ford Transit (2000 - 2006) - Renew the engine oil and filter
Вставка
- Опубліковано 16 жов 2020
- Do you need to Renew the engine oil and filter on your Ford Transit (2000 - 2006) but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Transit (2000 - 2006) manual covers the diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-gb/ford/transit...
What's covered:
Diesel:
Transit front-wheel-drive 2.0L (1998cc) (2000 - 2006)
Transit front-wheel-drive 2.4L Di & TDCi(2402cc) (2000 - 2006)
Transit rear-wheel-drive 2.0L (1998cc) (2000 - 2006)
Transit rear-wheel-drive 2.4L Di & TDCi (2402cc) (2000 - 2006)
Including Tourneo
Exclusions:
Does NOT cover auto-shift manual (ASM) transmission, petrol models, specialist bodywork/conversions or Transit Connect range. Does NOT cover new Transit range introduced October 2006. - Авто та транспорт
There's an allen key drain off for the filter housing too, bottom of filter housing. Saves oil going everywhere from removing the filter full of oil (like I just did)😊
Thankyou Haynes
You're welcome!
I've changed my filter numerous times and it leaks. Nothing I can do will stop it. Also put a new sump plug and seal on and that leaks. Any suggestions? (both torqued up correctly)
hello, i have a question: problem on my ford transit 2005 (85t260).
I have a coolant leak from the "oil cooler". I have the spare part, the question being: do I have to change the oil? or can I replace the part first and then replace the oil later?
If there's a possibility that coolant has mixed with the engine oil, changing the oil is essential.
@@HaynesManuals Thanks you
there is an oil cooler leak (hole / crack) near the bottom screw.
I wanted to replace the part to be able to move to a friend who has a pit and finally change the oil.
Do you think this is possible?
It depends on how much coolant is in the engine oil. Pull out the dipstick and check - any coolant should be floating on top of the oil.
Is there a trick to get the filter out of the housing, I used a lot of effort pulling it out and broke the spring and plastic thing in the middle ?
True. Just looking for some tips cause that's the only tricky part of the whole operation and not a word about it
would be nice if you add the the tools need such as size ... otherwise great apresentation.
can i use aluminium washers as crush washers?
Yes, as long as they don't leak
What size socket do you need to remove the oil filter case?
I need to know this as well
36mm
36 mm is correct, the drainplug is 13 mm
@@Max-bm5xj is the washer also 13mm?
which type of engine oil is best ?
5 w 30 preconised
5 /30 fully synthetic
If this is for non experts I would expect suggestion- do changing of oil with warm / hot engine (don't do it with cold engine)
Good point - the full procedure is given in our manuals.
I agree the oil drains better when the engine is warmed up