SRT4 DODGE NEON 135 AGP GEAR EXTENDER INSTALL, SHIFT SLECTOR
Вставка
- Опубліковано 19 жов 2024
- INSTALL OF SHIFT EXTENDER THE SO CALLED BAND AID FIX FOR 3RD GEAR POP OUT IN A 2004 SRT
THIS IS A QUICK FIX DEPENDING ON THE DAMAGE IN THE TRANSMISSION AND OR IT WAS THE BUSHINGS CAUSING THE ISSUE. THIS FIX WORKED FOR THIS CAR ITS A STOCK DAILY DRIVEN CAR
Yeah I seen this vid multiple times ,i actually learned in this vid how to do it 4 or so years ago lol , thanks man , I had forgotten about this vid lol , I had followed you a quiet some time now , awesome 😎.
What happen to videos like this .. great job
It was an actual rough time trying to performed it until I watched this vid like 20 times lol
I've been wondering if my car already has one of these. I have a Mopar STS and poly bushings on both ends of the cables. my 3rd gear engages super smoothly. my car is basically stock also. 92k miles. Ive had this one for a month now. my 2nd srt-4
only way to tell is remove the shiftier selector plate and take a look, but they say if its not broke don't fix it ....lol
Matt Mustang with that being said when do you need really need this my car is fine as well but preventive matinece is always good
I would say check the bushings, cables and shifter, for ware and replace as necessary, I've seen cars that owners drove with bad shifter bushings, cables, damaged shifters all that stuff causes poor gear engagement and damage the transmission. If all this is fine and you have 3rd gear pop out on the down shift and you want to try a cheep fix to get a little more use out of the transmission a gear extender is an option but it is not a fix the damage already done and may need internal repair.
Matt Mustang only.thing my trans does it lock me out of 1st until I'm doing like 5mph or less. does yours do that?
as a guess could be cable out of adjustment, worn blocking rings in transmission, or a shifter issue
Thanks brotha
no problem..
Been trying to tap the bottom pin out and it won't move very much in comparison to the top which came out easily
2ser_srt2 heat her up
How did you remove the bolt that’s under?
Arriba_Tijuas 21 save that one for last. use an open ended wrench and loosen it a little and work the shift plate up and work the bolt out a little till it's all the way out and then you can remove the whole shift plate.