WORKSHOP WALLS ARE UP - Experimenting with Insulated Panels

Поділитися
Вставка
  • Опубліковано 26 лют 2021
  • Our Patreon Page - / restorationcouple
    ☕️ Buy us a coffee to help us stay awake! - www.buymeacoffee.com/restorat...
    My plan ever since thinking up the workshop design was to use SIPs or some form of external insulation like this. It both performs better and gives more internal space while featuring the whole timber frame still. By the time the outside is timber clad it will be a hidden element and less like a commercial freezer! For the time being I will have a clean black canvas to show off the framed but also plenty of plans to create feature panels, shelves and storage between posts in the future. Alternatively you could use like SIPs and plasterboard or overboard internally if it was more of a garden room or office, etc. Future video will go into a few more of the details and costings. 👍
    Our UA-cam channel. / @panelsellltd9719
    SUPPORT THE CHANNEL
    Our Patreon Page - / restorationcouple
    ☕️ Buy us a coffee to help us stay awake! - www.buymeacoffee.com/restorat...
    Buy a Restoration Couple Mug - www.restorationcouple.com/shop/
    CONTACT US
    restorationcouple@gmail.com
    OUR SOCIAL NETWORKS
    Facebook - / restorationcouple
    UA-cam - / therestorationcouple
    Twitter - / restocouple
    Instagram - / restorationcouple
    OUR BLOG
    www.restorationcouple.com/
    #workshopbuild #insulatedcladding #timberframing
  • Навчання та стиль

КОМЕНТАРІ • 373

  • @TheRestorationCouple
    @TheRestorationCouple  3 роки тому +57

    It appears that I should need to clarify some things which will be covered in the next video anyway. The panel approach is no different from SIPs which often used on timber framed buildings. The idea of insulating externally means that the home frame can be featured in the workshop and avoids the need to use studwork between every post. Externally the building will look no different, it will still be over clad in cedar or larch. So rather than looking like an OSB box for a week or two it looks like a giant chiller, either way it still ends up at the same place and in a much better performing and quicker way. Inside I will likely leave most of the white panels as they will be covered with shelves and units but I will share how you could easily panel or plasterboard the bays in the next video. Hope that clears things up. 👍

    • @karenanderson7873
      @karenanderson7873 3 роки тому +1

      Phew. Didn't think you'd be going for the plastic look, not really you, is it? :-)

    • @syncrosimon
      @syncrosimon 3 роки тому

      Seems like a plan to me👍👍👍

    • @islandhopperstuart
      @islandhopperstuart 3 роки тому +1

      All my plans have just been turned on their head by your interesting and inspirational video! I now just need to work out how to build it without the most elegant timber frame internally, namely for the wall sections to carry all loads. I'm sure this can be done: I'm off to the Kingspan website now.....

    • @johnlangley6030
      @johnlangley6030 2 роки тому

      @@karenanderson7873 al

    • @alejandrolimache9518
      @alejandrolimache9518 Рік тому

      Sorry, what are the exterior parts of the panels made of? Steel o some kind of PVC? I thought that one of the main advantage of those panels is that you don't need to add anything on the exterior side (althought they may look as a giant freezer), like over clad with cedar or something. Am I wrong?. Here in Argentina, such panels are called sandwich panels and the external parts are made of steel sheets with an insulator in the middle.

  • @stephenboots
    @stephenboots 3 роки тому +8

    I thoroughly enjoyed seeing your partner (certainly not "helper"!) in winter gear and you with short sleeves. The build looks great!

    • @paulmcfeeters5554
      @paulmcfeeters5554 3 роки тому

      My wife and I are the sane way, I grew up tolerating UK "weather" and my wife is used to Arkansas weather which can make rocks melt.

  • @optimeenergy2869
    @optimeenergy2869 3 роки тому +11

    Sad that you have to justify your choices. The right job is the one your happy with and suits your budget. Top job

  • @Peter-ke7wy
    @Peter-ke7wy 3 роки тому +4

    Nice to see you had a sunny day for this part of the build!

  • @rodgerq
    @rodgerq 3 роки тому +10

    Personally I love the chunky timber frame, who cares of it is overkill, it looks great!

  • @james-jq8sk
    @james-jq8sk 2 роки тому +1

    As the workshop ages, those big timbers will look better and better, working inside that space will be amazing...

  • @mikekyffin3779
    @mikekyffin3779 3 роки тому +11

    Oh Tim and Jo, I’m a little envious of this workshop. Lovely to see you both working together too. Open sequence was amusing - “what do you mean assistant”?
    Love that picture frame view from the window too.
    And finally, can Tim’s smile get any larger? Keep well ☺️

  • @casq882
    @casq882 3 роки тому +4

    This is the best. I hope one day in USA we have this type of construction, here in US is only about money and build the cheapest toilet paper houses possible.

    • @Robbie..Ha-Navi
      @Robbie..Ha-Navi 13 днів тому

      speak for yourself. my house is better than that crap. , and this guy seems very gay.

  • @leigh051985
    @leigh051985 3 роки тому +2

    Fantastic job! Some good advice about the cost compared to other methods. Make a lot of sense 👌

  • @pwfost
    @pwfost 3 роки тому +3

    This is how we extended our non listed cottage with a two story Oak frame and clad with SIP panels, not metal coated but OSB with plaster board inside. Ended up studying and filling between the beams on the interior for added sound proofing. Generally it's great, just some things I would do different 2nd time around, like there will be a second time 🤣🤣🤣 Great job and enjoy the frame while you work in your workshop.

  • @evelyndole4618
    @evelyndole4618 3 роки тому +1

    I am so excited for you!! I have been waiting forever to see this workshop that you are always talking about 🤩🤩🤩🤩🤩

  • @Workshop-of-Allsorts
    @Workshop-of-Allsorts 3 роки тому

    Super job, so quick to install... you will have a warm workshop for sure 👌

  • @chriscardwell3495
    @chriscardwell3495 3 роки тому

    Awesome - very simple - quick construction also reduces the total cost

  • @marcus37274
    @marcus37274 3 роки тому +1

    Really enjoying the videos on the new workshop, keep them coming 👍

  • @mandyleeson1
    @mandyleeson1 3 роки тому +1

    Great progress, and so good to see that the dog is still going strong.

  • @ryanaskew5517
    @ryanaskew5517 3 роки тому +2

    They go together with a satisfying thud!

  • @zygmaszel8376
    @zygmaszel8376 3 роки тому +3

    Nice frame

  • @silversteel6312
    @silversteel6312 3 роки тому +1

    Editing as well as the walls have come on a bundle. Channel feels fresher for it.

  • @DIZZYDAZZLER2011
    @DIZZYDAZZLER2011 3 роки тому +12

    Using kingspan insulated boards are waaaaaay cheaper than using timber etc!! I recently built a 5.8m x 3.8m mancave using second hand boards for the walls and new for the roof and including a three panel bi-fold door and full plastering the interior I managed to build the room for less than £5K. The beauty is the insulation / noise suppression properties and the fact it will still be standing in 30+ years time.

    • @kiohaha
      @kiohaha 2 роки тому

      and for anyone else reading Dazzlers post, i just checked, yeap he has a 93 secs photo slideshow of his own build. very nice man cave indeed.

  • @AndyUK-Corrival
    @AndyUK-Corrival 3 роки тому

    Those panels are awesome. I might look into the roof panels to put on my workshop as currently it isn’t great and not insulated. Thanks for all the info. Andy UK

  • @dolphinliam888
    @dolphinliam888 Рік тому

    Amazing job! Great co-worker too. Thumbs up to both of you 👍👍🤠

  • @paulelstone2043
    @paulelstone2043 3 роки тому +1

    fantastic work, thank God you have a great boss E&P

  • @eddddd123
    @eddddd123 3 роки тому

    Brilliant product.....so easy...if i was to build a workshop I would use it

  • @coffeefortwosolly
    @coffeefortwosolly 3 роки тому +2

    I just clicked on to a 8 min video ( another channel) and yours popped up...I waited seven minutes to watch it and should of clicked on straight away ( was practicing patience😂) such progress in 10 hours...I really like the internal look...craftsmanship beams with a more industrial blend ..eclectic ❤️❤️❤️❤️ oh and loving Jo’s overalls! 🙋🏻‍♀️🇬🇧💕jane

  • @philipjones9297
    @philipjones9297 3 роки тому +1

    That’s going to be one beautiful shed 👍

  • @NicTaylorWoodworking
    @NicTaylorWoodworking 3 роки тому +1

    Man, this thing is coming together quickly! Nice job, dude!

  • @iainharper3926
    @iainharper3926 3 роки тому +4

    Here’s me struggling with 4 metre oak beams and there’s you “Oh the walls are up!” Pft... 😂

  • @vluiien7900
    @vluiien7900 5 місяців тому

    Интересный вариант!😊 Девушка помошница молодец!👍✊️👏

  • @djcr9166
    @djcr9166 3 роки тому +8

    Very interested in the cost comparison with the more typical stud wall etc build. Looking to build a workshop soon and was planning on stud walls, but also fancy a go at timber framing!

  • @andycrask3531
    @andycrask3531 3 роки тому +1

    Ive worked with those type of panels before 150mm thick and about 6m long. Used to build refrigerated buildings inside warehouse spaces.

  • @caldecotefallout3876
    @caldecotefallout3876 3 роки тому

    Tim is a spirit animal for us all.

  • @craig-michaelkierce1366
    @craig-michaelkierce1366 Рік тому

    Genius. What a wonderful job. Cheers...

  • @mattfulk6005
    @mattfulk6005 2 роки тому

    Looks good. I just finished a 30x40 workshop from insulated panels.

  • @b1shbashbosh
    @b1shbashbosh 3 роки тому

    I like the idea of using those cold room sips. Looks like a really efficient way of insulating and sealing the workshop; and probably better performing! I’m gonna have to look into this! Looking forward to seeing it clad though.. only then will it look more like a work of art than a glorified fridge! Keep em coming matey. Already looking forward to the next one.. cheers 😉

  • @Clothis64
    @Clothis64 3 роки тому

    I love this mix of tradition with timbers and this modernity with panels. Great work !

    • @csgowoes6319
      @csgowoes6319 3 роки тому +1

      Not gonna lie, I feel a bit conflicted about it. All that work making a traditional post and beam structure (which I can only dream of making) only to turn it into some sort of prefab hut. I mean, I get you need modern insulation and so on, but I guess I was hoping for wattle and daub :D

    • @Thatsme849
      @Thatsme849 3 роки тому

      i really don't tbh all the effort just goes to waste and now it will just look like any other shed

    • @Clothis64
      @Clothis64 3 роки тому

      @@Thatsme849 Not just look like any other shed because from the inside, Tim will be able to contemplate the fruit of his great work. In my opinion, this is the most important

  • @rafalfalkowski6950
    @rafalfalkowski6950 3 роки тому +4

    Protect not covered foam for rats and mouse. In poland we have some similar sheets named 'Obornicka' and i build my workshop from panels reused from old campings builds in 70'

  • @richardbraithwaite9653
    @richardbraithwaite9653 2 роки тому

    Very nice.....looks fab ....love your videos ....keep up the great work

  • @dannymurphy1779
    @dannymurphy1779 3 роки тому

    BOOM! Looking goooooood!

  • @celaltapan4212
    @celaltapan4212 2 місяці тому

    Bravo çok iyi sade başarılı iyi günlerde kullanın

  • @offcuts4146
    @offcuts4146 3 роки тому +1

    Well done mate you can see how excited you was at the start of the video it made me laugh

  • @awilbadoo
    @awilbadoo 3 роки тому

    great job looks lovely well done

  • @T8RTU
    @T8RTU 3 роки тому +1

    That smile is getting bigger by the day 😎👍

  • @agbamogunsamson2922
    @agbamogunsamson2922 3 роки тому

    I don't understand how sth as great as this can even get "a" dislike not to mention; "90".

  • @krisminderski1055
    @krisminderski1055 6 місяців тому

    You are one busy chap. Top work 💪💪💪💪💪👌👌👌👌

  •  Рік тому

    Video mà bạn đã chia sẻ thực sự rất hay. Cảm ơn bạn rất nhiều ❤

  • @thewatermillscotland
    @thewatermillscotland 3 роки тому +2

    I just spent over £1500 on 36x 2x4's and 25x plywood sheets for stabilising the watermill... yeah, these might be expensive but they look well worth it, and very convenient. Doing studding would have taken way longer and i suspect with current pricing be very little difference on material costs.

  • @tonyblunsum2547
    @tonyblunsum2547 3 роки тому

    Great idea !

  • @cjfinn1
    @cjfinn1 3 роки тому +12

    I was hoping for half-timbered wattle and daub.

    • @voidisyinyangvoidisyinyang885
      @voidisyinyangvoidisyinyang885 Місяць тому

      see my channel for my double wall wattle and daub primitive hut based on a 1800 BCE archaeological site design - in Germany.

  • @Tez73
    @Tez73 3 роки тому +4

    Handy little helper 😆😆
    Hope you’ve got some panels over , you can make a dog house 😆😉

  • @user-fr2rn7wd4s
    @user-fr2rn7wd4s Рік тому

    It is really clever way to build.

  • @clayed
    @clayed 3 роки тому

    That's a fancy work shop.

  • @rachidfnawi4077
    @rachidfnawi4077 Рік тому

    It's a very amazing job

  • @JB-wi9mj
    @JB-wi9mj 3 роки тому

    Good job, want to use SIPS for my next project .

  • @py_tok5589
    @py_tok5589 3 роки тому +1

    NICE VIDEO MATE

  • @johnroddy8756
    @johnroddy8756 3 роки тому

    Excellent job

  • @iangough7659
    @iangough7659 2 роки тому

    Looks excellent

  • @bobfal
    @bobfal 3 роки тому

    Just had a quick look on there website, genuinely surprised.

  • @RNMedic99
    @RNMedic99 3 роки тому +1

    You’re doing great. Don’t justify yourself to others

  • @almostanengineer
    @almostanengineer 3 роки тому +6

    You put them up easier than the five 'professionals' who just built our new home shopping pod 😂
    I wonder if they were the returns from our build, they only went back in January and are the same style and colour 🤔

  • @djburland
    @djburland 3 роки тому

    Wow, looks like a great idea. Look forward to seeing the finished job.

  • @benk2216
    @benk2216 3 роки тому

    Thanks for sharing

  • @edwardshaw9912
    @edwardshaw9912 3 роки тому

    Hello, love the channel

  • @innocenthearttalk9976
    @innocenthearttalk9976 2 роки тому

    Excellent 👍

  • @christopherhood9241
    @christopherhood9241 3 роки тому

    interesting material.
    house i live in has a conservatory that i hate - got me thinking now as a replacement.
    fully aware the building industry is a cottage industry and hates anyone whom tries to be different.

  • @southney7211
    @southney7211 3 роки тому

    Reminds me of working on food factory sites. Nice work 👍

    • @TheRestorationCouple
      @TheRestorationCouple  3 роки тому

      Reminds me of doing stock takes each week as a chef in walk in chillers! 🥶

    • @southney7211
      @southney7211 3 роки тому

      @@TheRestorationCouple I’m sure it’ll be nice and warm during winter though 👌

  • @jlmfoy365
    @jlmfoy365 3 роки тому +1

    I'd have come and helped Tim but you couldn't have got me in the back of that workshop with a sledgehammer. LOL. Regards Jim

  • @djmagicweb
    @djmagicweb 2 роки тому

    Nice. Saludos desde España

  • @Tokyo-In-My-Dreamz
    @Tokyo-In-My-Dreamz 4 місяці тому

    IMP panels are goof however scratch and dent fairly easy which makes repair a pain as you have to pull all the panels on the damaged side apart to replace.

  • @thesavage9726
    @thesavage9726 3 роки тому

    Greettings from Lima Perú

  • @AmaaZev
    @AmaaZev 3 роки тому

    Kingspan insulated panels, batons and cladding are the way forward. Did a job using the same features. Top notch!
    Great vid!!

  • @felixcat9318
    @felixcat9318 3 роки тому +2

    Very nicely done!
    Those beams look absolutely gorgeous and are preferable to steel.
    I wouldn't have OSB or plasterboard in anything I construct as I consider them to be utter garbage!
    Your workshop will not only be very well constructed, it will be lovely too, and making it a really nice place to be makes all the difference!
    Interesting people and project, subscribed!

  • @ridgmont61
    @ridgmont61 3 роки тому

    I chuckled at your comment that it looks like a freezer , pleased you are cladding it - seems a shame to cover the beautiful frame.

  • @12vLife
    @12vLife 2 роки тому +1

    This is brilliant. Love the idea of a visible timber frame. IMO , a dark stained timber and the contrast of the metal would look really pleasing. I have an open floor plan tiny house design where there are no mechanicals in the exterior walls. I am in Florida USA and wonder if this design with big custom Lexan (Polycorbonate) picture frame windows would pass Florida Building codes (Structural, Fire, Energy, Egress, etc)

  • @keefkhat4337
    @keefkhat4337 3 роки тому +1

    Hands up if you weren't expecting industrial SIPs! ✋

  • @50plymouths
    @50plymouths 3 роки тому

    This is cool

  • @birdie2202
    @birdie2202 3 роки тому

    clever how you did the roof angles ............

    • @TheRestorationCouple
      @TheRestorationCouple  3 роки тому

      Glad I did it that way rather than roof first. No tape measure needed. 👌

  • @MrFish1968
    @MrFish1968 3 роки тому +22

    Agreed, you've got the structural element in that amazing frame, so just slap insulation on the outside and avoid some thermal bridging. Where did you get the timbers for £1,200 as that seems crazy cheap.

    • @tracychamberlin3502
      @tracychamberlin3502 3 роки тому

      Damn it’s so nice to see a craftsman work, reminds me of me back in the day…Cheers

    • @jessicatorretto159
      @jessicatorretto159 3 роки тому

      Probably directly from the sawmill. Most sawmills in the UK will directly deal with you. And cash is good with a few of the smaller sawmills

    • @christophermccrary8080
      @christophermccrary8080 2 роки тому

      I'd look around for smaller, privately owned, sawmills in your area, for starters. Often times, if you can work with "rough cut" lumber, you can source it a lot more reasonably than you'd think. I don't know what type of wood he used, but I have enough pine on my land, I could drop some big, tall, mature, pines, and have them cut into whatever size lumber I'm looking for. If I needed some long, heavy, beams, I'd cut down every pine I had before I paid whatever asinine price they charge at retail stores.

  • @kamilmoskal8083
    @kamilmoskal8083 3 роки тому

    you should install the panels horizontally, with the zippers facing upwards, so that water does not leak inside

  • @lbh002
    @lbh002 3 роки тому

    Look nice.

  • @cristiancostoya
    @cristiancostoya 3 роки тому

    Very nice

  • @Dan-ger82
    @Dan-ger82 2 роки тому

    Was surprised you didn't use sealant between wall joints. Was told by contractor that they use rubber and caulking between wall joints on IMP.

  • @voidisyinyangvoidisyinyang885
    @voidisyinyangvoidisyinyang885 Місяць тому

    This is the ONLY youtube vid showing rockwool sandwich panels being installed!?! wow. There's several factory vids of production of them in China and Korea - must just being installed overthere!?

  • @josebarrera5425
    @josebarrera5425 2 роки тому

    🎁 good job

  • @davidroberts7490
    @davidroberts7490 3 роки тому

    This type of panel is also available in a fireproof form, but of course they cost more.

  • @Zippy1wood.
    @Zippy1wood. 2 роки тому

    You do what you like ,screw them chaps

  • @BOROTECH1
    @BOROTECH1 2 роки тому

    Super 👍

  • @garvielloken3929
    @garvielloken3929 2 роки тому

    NOOICE!

  • @webyankee6558
    @webyankee6558 Місяць тому

    I would caulk between each panel with GE silicon caulking.

  • @rickt6802
    @rickt6802 3 роки тому

    Beautiful handmade oak frame hidden ? But I can understand it leaves more space inside and I'm sure once clad it will look the business

  • @Extragonk
    @Extragonk 3 роки тому +1

    I expected to see the makita beam saw appear for day 2 cuts to make it thru in one pass

  • @user-ob7qw9rt3g
    @user-ob7qw9rt3g 2 місяці тому

    Жена молодец ❤,а лес по моему Сибирский.

  • @jonny7491
    @jonny7491 3 роки тому

    I’ve seen a open sided two car garage with the same timber frame, over engineered yes but every time you park you would look up and think wow . Now that’s got to be worth something.

  • @p.a.d2167
    @p.a.d2167 3 роки тому

    Des de la sierra de Madrid españa mi casa esta construida de esa forma las paredes exteriores la forro de madera el interior igual . Te Está quedando guenial

  • @georgiaaaable
    @georgiaaaable 3 роки тому

    I would not have used these panels for the party wall and I’m surprised that the building control officer agreed. The foam core is combustible and the metal face offers little fire resistance.
    I’m not here to champion sip panels, but, whilst they use a similar foam core they are available with a magnesium board skin which offers a very good fire resistance.
    A lot of the other comments on here appear to be confused between metal faced composite panels and Sips.

  • @ericwolfe42
    @ericwolfe42 3 роки тому +1

    You forgot the Butyl and you should have 45 degree miter cut those corners and covered with trim.

  • @garychadwick1240
    @garychadwick1240 3 роки тому +2

    Great video and thanks for the details. I was wondering throughout the video whether the long panels can be used horizontally as I’m sure that would have involved less cutting. Maybe you can’t because of the interlocking system has to be vertical for water drainage/proofing but it would be interesting to know?

    • @mikelondon08
      @mikelondon08 6 місяців тому

      Horizontal is the correct way to put these panels actually

  • @cheftomsd
    @cheftomsd Місяць тому

    It's interesting that this insulated panel uses no spline or caulking.

  • @TurinTuramber
    @TurinTuramber 3 роки тому

    Each to their own and really a question of personal priorities, balancing looks over efficiency.
    I perhaps would have made the braces nearly full breadth (to the posts) then infilled. Less thermally efficient of course but would keep post and beam look inside and outside by dropping the cladding inside. Thermal efficiency decrease could have been offset partially in the roof.

    • @bakervinci163
      @bakervinci163 2 роки тому

      I agree. I would never cover up that wood. I’m at this phase in a shop and looking for a wall material. The roof was completed first

  • @ahmedqasem3290
    @ahmedqasem3290 Рік тому +1

    👍👍👍👍👍

  • @bigears4014
    @bigears4014 6 місяців тому

    You get a good gust of wind inside your shed and them walls are gone for sure