I have always liked the Reinharts because they are not loud just a nice low rumble. Thanks for sharing and now that you have them would you buy them again? Ride Safe
Yes sir! I highly recommend and I believe it is worth every penny so far. I'm looking forward to that first long trip so that I can see how they perform on the long haul. Your time is much appreciated sir!
Great comparison video Ty! I started with the Rinehart 4.5 slip ons and later added the DBX baffles. Made it sound even better. That was a great cost effective way to get a lower rumble out of the slip ons. Just ordered the Rinehart Slim Line Dual Headers and will be putting those on when they arrive. It's a never ending process to get the perfect sound. Ride safe Brother!!
Hey now! No tune needed just for the slip-ons. They sound fantastic and I’m super happy with the product. Thanks for watching. I appreciate your time!!
That is exactly right. The video captures some of the sound, but I think you just have to hear it on the bike! Thanks man and I hope you are doing well...
Ty from Ohio here. I just put the identical set on my 17 Street Glide Special over the winter. I think you will be pleased. I will be letting them sound off on the Foothills PKWY and Tail of the Dragon next Sunday.
Hey there. I have since traded in that bike, but it has KST 12'. It was the perfect fit for me and I have the same ones on my Road Glide now. Thank you for watching!
I have a Road Glide 3 and many folks are getting the Tab exhaust with Zombie baffles but they sound way too loud for me. I want to be able to hear my stereo and don’t really want anything more loud than my stock pipes…how are the Rineharts for hearing music? It sounds nice on the video like a lion purring. 😂
Hi Jon!! The bike runs fantastic! Everyone told me that a tune was not needed just for the slip-ons. The sound in person is really impressive. For years I went with V&H but I’m glad I made this choice. If you enjoy the content on the channel would you please consider subscribing? Thanks and have a great day!
Very nice video and great sound of that Rinehart mufflers ! Was it a big job to modify the bronze stock muffler heat shields to put them on the Rinhart's ? Some people say that the CVO stock heat shields are not compatible with 4.5 inch aftermarket mufflers. I really love the stock look but would like to upgrade the sound. Cheers from Bangkok !
I sure hope the video was helpful. I have a Road Glide now, but still the same exhaust just blacked out. It's a great product. Thank you very much for watching!
Great choice, TY. I'm running 4" on my RK and absolutely love the sound. Picked V&H headers though. Did the mod virus infect you now? Stage II , next?😉👍
Oh I've been bitten by that bug before! 😂Not sure what's next. Maybe I'll start looking into Legends suspension. I sure do appreciate you watching the video and supporting the channel!
@@TyFromTennessee Most of the time when I took long trips, I would wear ear plugs, but it was never the exhaust noise, but the wind noise. Then again, it all depends on the helmet or cross winds that cause loud noise.
Hi mate I have exactly the same bike. I really love the color of the heat shields on this bronze amor CVO. My question is, do these 4.5 rineharts fit Under the stock shields?
@@TyFromTennessee Ty, many thanks for videoing this comparison with stock CVO pipes. Like you, I liked my stock 21’ Bronze Armor CVO look and thought it sounded “ok”. But have always enjoyed the sound of the Rineharts, throaty without being obnoxious. Now that I know I don’t loose the matching bronze armor heat shields I will have to follow suit and order a set of the Rineharts. Sure glad I ran into your video!
Hi Ty, What is the model # of slip-on’s you ordered? There are multiple black tips on the DBX 4.5 slip-on’s so wasn’t sure which black tips you chose. Thanks
We had the 4.5 motopro on our 107 and loved them. When we got our 2020 we went with the Rinehart DBX45. They have quite a different sound. I really like them too. Can't decide which one I actually like better. Lol One nice thing, they sell just the inserts so if I want to switch back to the motopro45 sound I can. Great video!
I’m this video I had the stock CVO seat on the bike. I have now upgraded to a touring Mustang seat. It makes all the difference in the world and I highly recommend! Thanks for watching!
Iam a happy new owner of a bronze armore cvo to , and want to put rinehart 4,5 slip ons but want to use the bronze shield ,,, are you sure the rinehart pipes are 4,5 ” / stock measure 4” ? Good video 👍
I’m certain they are the 4.5. I kept the box and here is some info that is printed on the outside. I hope it is helpful. Part # 500-0185, Serial # S545126
@@TyFromTennessee I had full exhaust system from rinehart 4.5” slimline on my 2020 road glide special and it sounded good.. now for the CVO I just purchased the 4” DBX slip ons. I will let you know how they sound, I get them sometime tomorrow. Let’s see, I’m excited to hear the sound.
Those sound fantastic! Great upgrade! I've got my eye on the Two Brothers 2 into 1 pipes. They sound great too and I hope to add more torque to my bike when I can afford it. I bought the 21 Harley Heritage Classic in Deadwood Green. Absolutely in love with this bike!! First bike I've had in 30 years. Easily takes 20 years off my life every time I ride!! Stay awesome brother!
The Heritage is a great bike! A guy I work with has one that is a blue type of color. 2 into 1's sound sooo good. I hope you enjoy that new bike Richard. Stay safe out there!
@@richardanderson4916 It's a great place to go for sure. I try to go a couple times a year. My 2021 Tail of the Dragon video comes out Thursday of next week!
Looks and sounds great! I have a set on my SGS and I love them. I'm thinking about replacing the baffles with the DBX baffles to get a bit more sound out of them.
The Rineharts sounds great on your new ride. I also did Rineharts 4.5 with a fullsac header on my Streetglide, but now with my new Roadglide I went with another company, and with the 114 from the 107 hmmm not into doing anything extra, no Stage one or two for me on this.
![Harley-Davidson Rinehart Racing Exhaust Comparison [Slip-ons vs. DBX]](http://i.ytimg.com/vi/-IrMZmmBYRY/mqdefault.jpg)
⚡⚡ Please SUBSCRIBE and ring that bell icon! HELP me reach 1000 subscribers! ⚡⚡
I have always liked the Reinharts because they are not loud just a nice low rumble. Thanks for sharing and now that you have them would you buy them again? Ride Safe
Yes sir! I highly recommend and I believe it is worth every penny so far. I'm looking forward to that first long trip so that I can see how they perform on the long haul. Your time is much appreciated sir!
Great comparison video Ty! I started with the Rinehart 4.5 slip ons and later added the DBX baffles. Made it sound even better. That was a great cost effective way to get a lower rumble out of the slip ons. Just ordered the Rinehart Slim Line Dual Headers and will be putting those on when they arrive. It's a never ending process to get the perfect sound. Ride safe Brother!!
That sounds like so much fun! I want to order more toys for the bike now. hahaha! Thank you sir. I appreciate your time very much!
Hey buddy, great video I’m getting these for my road king special. Did you need/ get a tune?
Hey now! No tune needed just for the slip-ons. They sound fantastic and I’m super happy with the product. Thanks for watching. I appreciate your time!!
Love the deep rumble and I'm sure they sound even better in person. Usually videos don't do the sound justice. Glad you like them 🤘🤘
That is exactly right. The video captures some of the sound, but I think you just have to hear it on the bike! Thanks man and I hope you are doing well...
Ty from Ohio here. I just put the identical set on my 17 Street Glide Special over the winter. I think you will be pleased. I will be letting them sound off on the Foothills PKWY and Tail of the Dragon next Sunday.
Thanks Ty. I hope you enjoy that ride. Those are some beautiful roads to ride. Be safe!
I have these and I have zero complaints. Nice bike sir.
Thanks Rodney! I appreciate that very much!
I have Rineharts I love them! What size are your bars?
Hey there. I have since traded in that bike, but it has KST 12'. It was the perfect fit for me and I have the same ones on my Road Glide now. Thank you for watching!
I have a Road Glide 3 and many folks are getting the Tab exhaust with Zombie baffles but they sound way too loud for me. I want to be able to hear my stereo and don’t really want anything more loud than my stock pipes…how are the Rineharts for hearing music? It sounds nice on the video like a lion purring. 😂
They sound great and I can hear my stereo loud and clear. Thank you for watching!
The Rinehart's sound a lot better, I put them on every Harley I've owned, I just love them, good choice Brother 💯
You're a wise man. I really like this exhaust and I think I'm sticking with it for a while! Thanks Dan!
@@TyFromTennessee anytime Brother,they sound great 💯
They sound good!!! I’m trying to decide between these and Torquer 450. How did it run without a tune?
Hi Jon!! The bike runs fantastic! Everyone told me that a tune was not needed just for the slip-ons. The sound in person is really impressive. For years I went with V&H but I’m glad I made this choice. If you enjoy the content on the channel would you please consider subscribing? Thanks and have a great day!
@@TyFromTennessee subscribed! And many thanks for the response 👍🏽
@@Elmuchacho17 You are the MAN! Thank you!!
Thanks for the comparison Ty. They sound sooooo good !! Have a good day.
Thanks Larry! I appreciate that very much sir...
Had those 4.5s on a 2020 CVO Limited for a year now and love them!
Thanks Hal. Great exhaust for sure!
Very nice video and great sound of that Rinehart mufflers ! Was it a big job to modify the bronze stock muffler heat shields to put them on the Rinhart's ? Some people say that the CVO stock heat shields are not compatible with 4.5 inch aftermarket mufflers. I really love the stock look but would like to upgrade the sound. Cheers from Bangkok !
It wasn't too bad at all. We were able to figure it out with a little bit of troubleshooting. Thanks for watching!
Did you use longer clamps for the muffler heat shield or used the factory ones.
@@SOONERS918 We were able to use the factory clamps. Just had to loosen them up a bit to fit the new exhaust. Thanks Matthew!
Hello, I’m catch this right… bronze armor heat shields were reinstalled?
Whoa! What a difference! That's music right there brother!!!
Yeah, dude! Thank you so much for the help. You're right...this was the way to go...
Great job Ty! This should def help folks decide if its right for them! Well done!
Thank you sir. I appreciate that. I hope you crush that 1K soon bro!
Badass. Thank you brother. I’m sold❤
I sure hope the video was helpful. I have a Road Glide now, but still the same exhaust just blacked out. It's a great product. Thank you very much for watching!
Great choice, TY. I'm running 4" on my RK and absolutely love the sound. Picked V&H headers though. Did the mod virus infect you now? Stage II , next?😉👍
Oh I've been bitten by that bug before! 😂Not sure what's next. Maybe I'll start looking into Legends suspension. I sure do appreciate you watching the video and supporting the channel!
The exhaust sounds good, but I would like to know how do they do on long trips? Do you have to get better ear plugs while riding? ;)
I never had to use ear plugs with my V&H on long rides so I'm hoping I don't have to with these pipes either. Thanks for watching Paul!
@@TyFromTennessee Most of the time when I took long trips, I would wear ear plugs, but it was never the exhaust noise, but the wind noise. Then again, it all depends on the helmet or cross winds that cause loud noise.
This video will help others considering exhausts, as that's what I did. Good job!
I hope so. So far I haven't heard any negative feedback at Rinehart...from anybody! Thank you very much for watching!
@@TyFromTennessee great choice of exhaust
Dbx or classic baffles? Sounds good 👍
It’s the DBX. They sound awesome. Thank you for watching!!
Hi mate I have exactly the same bike. I really love the color of the heat shields on this bronze amor CVO. My question is, do these 4.5 rineharts fit Under the stock shields?
Hi David. Yes sir, they sure do. It took a little bit of maneuvering, but the existing heat shield work just fine! Thank you very much for watching!
@@TyFromTennessee Ty, many thanks for videoing this comparison with stock CVO pipes. Like you, I liked my stock 21’ Bronze Armor CVO look and thought it sounded “ok”. But have always enjoyed the sound of the Rineharts, throaty without being obnoxious. Now that I know I don’t loose the matching bronze armor heat shields I will have to follow suit and order a set of the Rineharts. Sure glad I ran into your video!
Hi Ty, What is the model # of slip-on’s you ordered? There are multiple black tips on the DBX 4.5 slip-on’s so wasn’t sure which black tips you chose. Thanks
Hello, did you reinstall the bronze heat shields? Thanks.
I also did the Rinehart’s on my SGS and love the sound. Nice choice.
Yeah man. It was the way to go for sure. I'm super happy with them. Thank you for watching!
The Rhineharts sound REALLY GOOD Ty!!!
Thanks Toby! I really appreciate that sir! I think I made a good choice...
We had the 4.5 motopro on our 107 and loved them. When we got our 2020 we went with the Rinehart DBX45. They have quite a different sound. I really like them too. Can't decide which one I actually like better. Lol One nice thing, they sell just the inserts so if I want to switch back to the motopro45 sound I can. Great video!
Thank you very much for watching! I'm really happy with these pipes. I took the bike out all day yesterday and it wasn't too loud...it was just right!
This was a good improvement with the sound. And you won't make your neighbor's mad for being to loud.
I hope not. Some of my neighbors can be a bunch of cry-babies. 😂 Thanks for watching John!
I like that seat. What brand is it?
I’m this video I had the stock CVO seat on the bike. I have now upgraded to a touring Mustang seat. It makes all the difference in the world and I highly recommend! Thanks for watching!
Iam a happy new owner of a bronze armore cvo to , and want to put rinehart 4,5 slip ons but want to use the bronze shield ,,, are you sure the rinehart pipes are 4,5 ” / stock measure 4” ? Good video 👍
I’m actually having the same problem, and would love to know the same thing. I would love to keep the bronze heat shield on as well.
I’m certain they are the 4.5. I kept the box and here is some info that is printed on the outside. I hope it is helpful. Part # 500-0185, Serial # S545126
@@TyFromTennessee thanks that helps , nice bike and now some good sound .
@@TyFromTennessee I had full exhaust system from rinehart 4.5” slimline on my 2020 road glide special and it sounded good.. now for the CVO I just purchased the 4” DBX slip ons. I will let you know how they sound, I get them sometime tomorrow. Let’s see, I’m excited to hear the sound.
@@rauloliva8819 Yes! Let me know!!
Sounds heaps better.Nice one mate 🤘🔥🤘
Much appreciated sir and thank you for watching! I think it was a good choice.
@@TyFromTennessee Great Choice
The Rinhart 4.5 sound awesome.... I like the deep tone of them.
Yeah I do too, man. They have a really nice rumble. Thank you for watching!
Hello, did you reinstall the bronze heat shields? Thanks.
Yes. We reinstalled the bronze heat shields. The exhaust looks and sounds amazing on the motorcycle. Thanks for watching!
Those sound fantastic! Great upgrade! I've got my eye on the Two Brothers 2 into 1 pipes. They sound great too and I hope to add more torque to my bike when I can afford it. I bought the 21 Harley Heritage Classic in Deadwood Green. Absolutely in love with this bike!! First bike I've had in 30 years. Easily takes 20 years off my life every time I ride!! Stay awesome brother!
The Heritage is a great bike! A guy I work with has one that is a blue type of color. 2 into 1's sound sooo good. I hope you enjoy that new bike Richard. Stay safe out there!
@@TyFromTennessee thanks bro. I'm in S. Florida. Hope to ride those roads you did in your vids! Tail of the Dragon looks sooo fun!!
@@richardanderson4916 It's a great place to go for sure. I try to go a couple times a year. My 2021 Tail of the Dragon video comes out Thursday of next week!
Yahhhhhhh that sounds awesome!! I know the first thing I had to do was put exhaust on the challenger. Have to let them sing! Good stuff bud
Thank you sir. I was lucky enough to be able to ride all day yesterday and these pipes are just perfect for me. Thanks for watching!
Excellent commentary 👌
Thank you very much. I appreciate your time.
Your bike is badass, but now it's even more badass. Very nice.
Thanks Ed! I really do appreciate that sir. Be safe out there!
Looks and sounds great! I have a set on my SGS and I love them. I'm thinking about replacing the baffles with the DBX baffles to get a bit more sound out of them.
Thanks Curt! Such a great product. I'm glad I made the switch from V&H this time.
What did you do with the stock bronze heat shields??
The heat shield are still on the bike. It took a little bit of adjustment but it worked perfectly. Thank you for watching!!
Why would you put chrome pipes on when everything else is black?
Hello and good morning. I have recently traded that bike in on a Road Glide Special. Personal preference for the most part. Thank you for watching!
Rineharts all damn day 👊🏾
Yeah man. I have them on my Road Glide now and they are awesome. Thank you for watching!
Great video
Thank you very much for watching! I appreciate your time today!
Do a stage 2 s&s 475 cam and rineharts , remap and u will loose ur mind! Thats the pinnacle of true happiness 😊
That sounds like a fantastic idea!!
New pipes sound better but the stock ones didn't sound bad either. One sharp bike
Thanks you James. I thought the same thing about the stock pipes. Not too bad. I appreciate your time sir!
I have Vance and Hines but I have to say yours sound better.
Don't get me wrong I really love V&H, but I'm glad I choose something different this time. Thank you very much for watching!
The Rineharts sounds great on your new ride.
I also did Rineharts 4.5 with a fullsac header on my Streetglide, but now with my new Roadglide I went with another company, and with the 114 from the 107 hmmm not into doing anything extra, no Stage one or two for me on this.
I was really pleased with this exhaust. I'm usually a V&H customer but I just couldn't pass this up. Thanks for watching!
I luv my rineharts br!
Sounds good 👍
Thank you sir! I'm looking forward to many revbombs with these!
Are these True Dual?
I’m not even sure what you mean by that. Sorry Eddie.
Much better 😎🤙🏻
Thank you Big Bert!
You could have bought 2.5 in. Fullsac baffles to put in your CVO mufflers
So many options for sure. I think I made the right choice for what I was looking for. Robert, thank you for watching and supporting the channel!
👍🏼👍🏼👍🏼👍🏼
Thank you very much for stopping by the channel! Have a great day!
Rinehart Part # ?
I’ll see if I can find that for you.
I think it might be 500-0185. You can also try SN S545126. I sure hope this helps!