Harbor Freight Quinn 14-In-1 Painters Scraper Review
Вставка
- Опубліковано 20 сер 2021
- This could have actually been useful but the quality control and manufacturing are terrible the blade is not sharpened and the hex bit driver is on the handle end where you hammer and will ruin the hex receiver, there is also has terrible errors in the booklet so the hex sizes in the blade are wrong.
Harbor Freight #58046
Just bought one from Harbor Freight.
They may hear the critics from your channel. The one I bought has now a sharp knife edge on the convex and concave side. I just did old paint removal job with it as a chisel. I hammered it hard and it still hold.
Thank you!
That 9/16 head look like a 3/8 thread and the 7/16 head is usually a 1/4 thread,maybe that is what they meant. Lol I like the jokes!
i was about to say this
Makes sense!
I just found one of these on the street, I think it's a good value. It included the two screwdriver bits, they don't fall out that easily. The scraper blades are reasonably sharp, no evidence that they have been resharpened from original, certainly not blunt edges as appeared in the video. The blade and handle are quite heavy, not likely to bend. This video doesn't bother to demonstrate or explain all the multiple uses of the tool; I found a better video for that. The teardrop shape is for lifting nail heads for removal.
Thank you for saving me time and money on this
Go in and look at one. Did $5 damn bucks it’s a great tool.
Hello again Catus Maximus and Tiny
Thank you for another Great Video. I have to agree with you.
I bought a Quinn regular flexible scrapper with a hammer cap on the back and the first time I hammered on the back of it the handle ate the scrapper blade. Was very disappointed.
Even the Husky isn’t sharp. I use em for removing tile. I don’t want it to be a razor Blade. I do use for removing caulk and sharp is nice there. I dunno
I've honestly never under most of the x-in-1 tools. I get why the marketing team like them, and the only ones I have liked are the Leatherman type ones (even they stretch the truth a bit).
The nut drivers may as well be 1" and 90mm for as many things as I have seen that could be done with a large flat putty knife with nut drivers built in. (My experience, there may be situations I just haven't come across)
How did the store sell you the display?!
Catus, what are Taping knives used for?
The husky version at least comes with a number 2 Phillips
I haven't seen any of the Quinn brand of Harbor Freight Tools that were much good. The pliers jaws don't meet properly, the side cutters have gaps, and the rivets are loose. This is just the pliers, but it is typical of the Quinn brand.
@Hell's favorite Salty Masshole they're just Pittsburgh pro sockets with red (and blue) lipstick
I've found Pitts Pro to be better than Quinn, and cost less.
That’s harbor freight for you always letting you down. HF is my last chance in survival. Funny story that one of the guys bought a multi meter and our professor said return it because it does not have a fuse to check electrical circuits and it was actually more than HD multimeter and HD was actually better.
I just put my grinder on it and sharpen it,works like a champ 🏆
The one I bought is fine
I bought a similar Canadian made tool. I have yet to find it useful in any way. Basically a POS. Fortunately I am not a painter. They might enlighten us on the use of these tools. Mine isn't worth attention to even throw it out, which I will do now.
Really, wrench cutouts and a cap lifter ?
The cap lifter alone is enough to make me not want to buy it.
Lol😏
Well i think your right. Im sure the quality control Asian, Asian wwas was on opium on that day. But to refurbish the tool i could have used that on some of my Repo nights. Dont ask i wont tell ya what it is good for.
....but for its purpose i sorry to hear its a disappointment of a tool.
Keep going 🐈 change the world for the better, and dont forget we are here to bear witness your contribution for humanity. Hopefully tomorrow your shows will be nuber one on the Google search. 👍👍👍!
Political potato has spoken.
@@unlocked1040 , lol 😇👍🥔
😎😂😎😂😎
lost in translation LoL
i have seen one that is way better
it has a flip out bit holder
not bad for an 8 year old...
"Made in China" pretty much says it all.
Why? Because literally *EVERYTHING* is made in China? Dipsh💩t!
Saw this identical tool in WalMart labeled under the HyperTough brand. Over $7.00 for the exact same garbage.
That means it's twice as bad and twice as useless.
It comes from China!
Yeah, that’s pretty bad! 👎🏻
Garbage freight