This shit crazy… I’m 26, I’ve been cutting hair since I was 13 with the same clippers and just now figuring out this information 😅… granted I never went to school for this. But I’ve always wondered why it took me so long/ much effort to get my fades right… Now I know this, my fades about to be outta this world🙏🏽 Thanks fam
@@Tigerbalm1310 and don’t need it making 30-50+ a cut lol this Atlanta slime and I cut better than MOST with a license lol and that’s on my kids. You can work here without it 😌🙃
I started putting my bald line in with a closed fade blade and found my foil blends into the line just as smoothly as if I used my trimmer. Game changer
I did a cut today with the fusion blade and man I wasn’t used to it cutting that low! The open fade felt lower then the tape blade. Definitely have to get used to it!
I tried the faper blade and really wanted to like and it seems everyone is making that style lately but I like the way taper blades fade more. I use the faper with a ceramic staggertooth blade to blend out my last line but that’s it.
Such an informative video! Would have liked to see you also cover making sure the blade is centered so the moving blade doesn’t go further to one side or the other when you’re using corners to fade.
This video is so informative! I thought all clippers cut the same lol! I thought every clipper was able to fade and taper any type of hair. I had no idea I was supposed to buy different clippers. Thank you so much for making this video! You have helped so many.
So pretty much if I have a fade blade , I really don’t need a “faper” right? I might as well get me a clipper that has a taper blade right? A fade blade is mainly to knock off that hard line created with the trimmer right?
Hey, I been trying to find what is the BaByliss Taper Blade cutting ranges in .mm? By any chance do you know. I can’t seem to find the range anywhere. Thanks. Great video
Not trying to sound like a butt head but the taper blades when zero gapped are closer to 2mm-1.7mm open and about 0.7mm-1mm closed. I know this because I used a digital caliper to get the measurements. What I did was place one side of the caliper on the tip of the moving blade and the other on the outside of the still blade. Take it with a grain of salt, results will vary but you can get pretty good results to help you with your haircuts. Awesome videos brotha blessings.
What blade would you recommend to use for a beginner trying to do a high fade? with the self cut system dark night clipper how much would i have to adjust the blade for that? What's a good starting trimmer and shaver as well?
Thanks for this vid Sean! One thing I’m slightly concerned about is whenever i turn the clipper on, I occasionally hear this small click noise, Should I be concerned? Or will it go away after a while
Hey Sean if you see this- If taper blade no guard open is 3mm that would make it equivalent to a one guard closed as is labeled on the guards. However if a fade blade no guard open is equivalent to a half(as it should be in the wahl system) then that would mean a fade blade no guard open should be about 1.5mm not 2.5 mm. 1/2 guard=1.5mm. Please let me know if this is correct. If so that would mean that a fade blade open blends into a 1/2 guard and a taper blade open blends into a 1-like the Andis masters.
Hey Sean please respond, I’ve just bought the babyliss snap fx clipper and trimmer what taper blade do you reocmmend for the clipper and what blade for the trimmer, will really appreciate it ❤
One question so original corded Andis masters I have the blade on my JRL now so that’s a fade blade ? Does the masters make a taper blade or is a master blade a masters blade ? I see they have different master options I see #22 and #28 for replacement options. Let me know your insight please. I will follow what you tell me to do I base what I do mostly off you brotha.
Hey Sean! I hope you see this - I appreciate all of your help and guidance man, you've been monumental in my barbering journey. Quick question - do you prefer the babyliss graphite taper blade over the DLC titanium, or would you go either way?
Hi, I have a question: when you tighten the screws after adjusting the blade, do you do it with all your strength? so to the maximum? or do you tighten lightly until the first stop? Regards and thanks for the guide!
There are two pieces, one for the screws above and the other below it, and there is a long slit. You must place the second piece exactly in the slit, then adjust the screws tightly.
Sean, for the average hobby cutter on friends and family.. i have the magic clip with fadeblade and it sometimes snag, as you mention. Would you go with the 1006 taper wahl blade or the SC fusion / taper blade on the magic clips?
This video answered every question I had about this topic. Such quality information and media also. Did you end up doing the trimmer vid? Also I see now why you have two x ergos on your staton and why. I understand the concept of millimeters you break down in some vids. Def replacing a couple clippers with fade blades def my FX’s. Thanks bro. Again.
Can you mix and match the top and bottom of blades? I want two different colors so I can see where the actual cutting blade is. I just started cutting so it’s hard to see where the cutting blade is when the lever is open. That white cutting blade you have is probably the best for contrast on dark hair right? Can I put that under my gold babyliss pro wedge blade?
Will the fade blade also rattle the guards if zero gapped or just the taper blade ?? Wanting to switch to a fade blade on my pair as that’s my preference but want to be able to zero gap them all the way without a problem as I feel that’s the best advantage of them is they cut so close zero gapped which lets me get a super clean blend . Also Very informative straight to the point video🔥
Hey there Sean, love your videos and content. The education here is incredible, especially for new barbers and for those that like to experiment to see what works best for them! I personally like to have all three blades at my station faper, taper & fade blades. I have yet to try the Babyliss wedge blades. Plan on trying those next.
@@Seancutshair not enough to change ur fading steps correct I’m asking because I fade without using a half guard only a number 1 but I wanna zero gap my fading clippers
Great video bro! I was wondering, how often do you have to change the regular (taper blade) &/or cutting blade on the x-ergos and how much use on a scale of 1-10 do you put into that blade? (Asking bcause the gammaplus site says they recommend changing the dlc fusion blade every 1-4 months) but says nothing on the other blades, and I'm looking to get the regular taper blade.
Honestly I don’t hardly ever change blades. I switch clippers often so don’t notice it being an issue. I’d follow their recommendation and I’d imagine it’s the same for all their blades
should I switch to the Wahl taper blade or switch to the masters blade on my senior? I kinda don't like the Wahl Guard system. Seem like it takes longer. I only cut my son and my hair.
Honestly it’s mostly a fade blade just has the grooves on it. It’s exactly as thin as a fade blade. I always thought it was in the middle but I’m not so sure
Thanks for the info Sean! I recently replaced the fade blade on my babyliss clipper and since then, it doesn’t cut the same. The cutting blade is just bad. Any suggestions to mod it? Thanks brother 👍🏾
Hey man. Great content! Been cutting my own hair for 20 years but did my first bald fade on a friend last week. He liked it.. I had problems with the loprofx battery draining so i returned them. Ive got 2 babyliss fx boost+ coming soon. Going to put a taper blade on one and the other, should I keep the fade blade or will a s|c fapor fit? OR have you tried out the MIM blade yet? Fyi love your channel so much, bought the gold saber trimmer, andis slimline and fx3 foil shaver too! Thank you!
I just got troll clippers and I took that top blade off to clean and the cutting blade came off too. When I put it back to how I thought it was now they are crazy loud. I pulled it off and flipped it and it was still crazy loud. Not sure how to reinstall this blade. I’m not a barber, just someone that stumbled onto your page when I needed some new clippers.
The fusion blade is really a fade blade its super thin even thinner than a wahl fade blade. Only difference is the ridges on it, great for the skin line, but cuts very short and unforgiving.
@@Seancutshair I just ordered the fusion blade will take a while. I put the andis on its working but want to try the fusion. These blades are sharper for sure. I don't see anyone using the andis blades in the sabers.
great video my guy! 🙌🏼 currently waitin on my philty mod package to come thru - got the andis master fade blade wit da strrreetch bracket for my wahl seniors, ya digg! 🔥
Can’t find a gamma/Stylecraft taper blade online anywhere. I want to put a taper blade on my rebels. Will a babyliss taper blade work if I put the regular bracket back on and take off the stretch bracket?
Ok I’ve always wonder about the fusion blade a good reason to buy another clipper with a fusion blade I could sure put it to use a I normally use a fade blade to remove those hard to remove lines especially on dense hair after shaving
very useful thank you but you missing to explain ,There are two pieces, one for the screws above and the other below it, and there is a long slit. You must place the second piece exactly in the slit, then adjust the screws tightly.
Hey bro, I just bought the Babyliss trimmers and it kept tugging me when doing my neck. I Checked on the alignment and I oil them up too and still snags. Not sure if I need a new blade or what. Or just sharpening it?
I personally don’t really use fade blades. But that is what they’re each better for. A taper blade doesn’t really take the skin line out, but the open section is longer and makes some of the rest of the fade easier
Is the wahl 100 year anniversary Clipper considered a senior? Was wondering what I can put on my 100 year anniversary Clipper ? I don’t wanna do that andis philthy mod either … plz get back to me I’d appreciate it fellas 👌🏽
Awesome info man. Do you think a clipper with the fusion blade works alongside a clipper with a taper blade better with or without the stretch bracket on the fusion blade? Have always used a fade blade but I’m planning on throwing a taper blade on my magics and a fusion on my gamma boosted, not sure whether to use stretch bracket or not on the boosted
So Sean, you dont use that Seniors mod with the andis blade anymore? You did a dope video on it so i was wondering if you still use that mod seniors and if not, why so? Salute
I changed the blade on my seniors for a gamma taper blade and my clippers turn off randomly now and won’t turn back on until I connect them to power. Any ideas?
Make sure their oiled well and that it’s not on too tight. Sometimes if it’s too tight and can’t move freely enough they might shut off. Never heard of that on a senior but on other stuff. That’s what I’d try
@@Seancutshair it turned out to be the tomb45 battery. I swapped the oem to the tomb45 when I changed the blade. I changed it back and it worked fine throughout my cut today.
@@Seancutshair thanks for the reply man, im new to cutting so i dont know whether to use either a taper or fade blade on one clipper or use the same on both clippers
what if you put the stretch bracket on the wahl senior with its wahl back blade and ceramic cutting blade? will it extend to a 3mm from a 000? also at 7:30, can i still do regular haircuts with that sc blade? like if i throw on a 1 or 2 guard, will it be effective in cutting hair cleanly with that taper blade?
I don’t know the exact measurements. It all still cuts the same just different blades depending on if you want your closed clipper shorter or open clipper longer
I just purchased the faper blade to put on my gold magic clips. The fade blade on the wall seems to have nearly identical dimensions to the faper. Is there really a difference? Or is the stylcraft fade blade just so thin that the faper is middle ground between stylcrafts fade and taper?
@@Baldsohard365 couldn’t tell ya just saying that’s why they says it’s somewhere between the fade and taper blade. Basically a fade blade in thickness though
@Seancutshair yeah. That's the part that confused me. I bought the faper to get smoother blends. The saw it was almost identical to the fade blade. What I did notice is that the flat surface of the regular fan blade has increased tension when sliding across my finger. While the ridges on the paper blade reduce the tension and gives it a smoother stroke. Hopefully that translates on my next cut. Which will be a while since I'm a home Barber who only cuts my family's hair. LOL. I appreciate the reply. Keep up the great work
In prison I cut hair with comb and razor so the regular chamillion fade blade on my babyliss is still like a luxury compared to that. Works pretty good. I may have to try the taper blade though. Great video bro. Which taper blade would you recommend for my babyliss lo pro??!
This shit crazy… I’m 26, I’ve been cutting hair since I was 13 with the same clippers and just now figuring out this information 😅… granted I never went to school for this. But I’ve always wondered why it took me so long/ much effort to get my fades right… Now I know this, my fades about to be outta this world🙏🏽
Thanks fam
🙌🏻🙌🏻🙌🏻
Get your license or you will always be stuck in the same place
@@Tigerbalm1310who told you that lie?
@@egotisticalquan7247 let me guess you don’t have one
@@Tigerbalm1310 and don’t need it making 30-50+ a cut lol this Atlanta slime and I cut better than MOST with a license lol and that’s on my kids. You can work here without it 😌🙃
Been cutting a long time but never really had this info presented so well... Good shit homie
Appreciate it 🙏🏼
Once I finally figured this out I had a better understanding of what blade to use depending on what I’m doing 💯💯
Right on 🙌🏻
I started putting my bald line in with a closed fade blade and found my foil blends into the line just as smoothly as if I used my trimmer. Game changer
👌🏻👌🏻👌🏻
I did a cut today with the fusion blade and man I wasn’t used to it cutting that low! The open fade felt lower then the tape blade. Definitely have to get used to it!
It’s a little different for sure!
I tried the faper blade and really wanted to like and it seems everyone is making that style lately but I like the way taper blades fade more. I use the faper with a ceramic staggertooth blade to blend out my last line but that’s it.
I used taper blades forever!
I’ve had great luck with the TPOB taper blade. It’s, for me, the perfect in between.
Like the SC Fusion blade it’s a wedged taper blade.
Such an informative video! Would have liked to see you also cover making sure the blade is centered so the moving blade doesn’t go further to one side or the other when you’re using corners to fade.
Dang sure did leave that out lol
This video is so informative! I thought all clippers cut the same lol! I thought every clipper was able to fade and taper any type of hair. I had no idea I was supposed to buy different clippers. Thank you so much for making this video! You have helped so many.
They are all capable of doing a haircut but some do different things better than others and can help improve your haircutting!
So pretty much if I have a fade blade , I really don’t need a “faper” right? I might as well get me a clipper that has a taper blade right? A fade blade is mainly to knock off that hard line created with the trimmer right?
Yes you nailed it
Hey,
I been trying to find what is the BaByliss Taper Blade cutting ranges in .mm? By any chance do you know. I can’t seem to find the range anywhere. Thanks. Great video
Not trying to sound like a butt head but the taper blades when zero gapped are closer to 2mm-1.7mm open and about 0.7mm-1mm closed. I know this because I used a digital caliper to get the measurements. What I did was place one side of the caliper on the tip of the moving blade and the other on the outside of the still blade. Take it with a grain of salt, results will vary but you can get pretty good results to help you with your haircuts. Awesome videos brotha blessings.
Yeah of course it can vary depending on how it’s gapped. Just stating the measurements listed on the blades
Hey Sean, I recently bought a stagger tooth ceramic blade will it work if I use it on a super taper still blade?
It should!
What blade would you recommend to use for a beginner trying to do a high fade? with the self cut system dark night clipper how much would i have to adjust the blade for that? What's a good starting trimmer and shaver as well?
Thank you Bro I needed this explained
Best taper blade for wahl ? Im looking at babyliss blades looks a bit thinner than the old wahl taper blades. Does gamma taper fit wahls?
Wahl 1006
Thanks for this vid Sean! One thing I’m slightly concerned about is whenever i turn the clipper on, I occasionally hear this small click noise, Should I be concerned? Or will it go away after a while
I’m not sure exactly the noise but it may be normal
Nice vid. I'm also feeling the automotive shop storage at each station. Good idea.
💯💯💯
Hey Sean if you see this- If taper blade no guard open is 3mm that would make it equivalent to a one guard closed as is labeled on the guards. However if a fade blade no guard open is equivalent to a half(as it should be in the wahl system) then that would mean a fade blade no guard open should be about 1.5mm not 2.5 mm. 1/2 guard=1.5mm. Please let me know if this is correct. If so that would mean that a fade blade open blends into a 1/2 guard and a taper blade open blends into a 1-like the Andis masters.
No a half guard plus the blade equals more than 1.5
What is a better boosted fx with faper, and magic clip with fade blade , or opposite?
Boosted with any blade
What blades do you recommend for my Babyliss clipper & trimmer?
I like the graphite taper blade and the graphite fx707b trimmer blade
Got the 'ole BEAST MODE OUT.
Out the grave!
Hey Sean please respond, I’ve just bought the babyliss snap fx clipper and trimmer what taper blade do you reocmmend for the clipper and what blade for the trimmer, will really appreciate it ❤
I’d put the new MIM blade on it, and a fine tooth trimmer blade either gold or gunmetal
@@Seancutshair mim blade is a fade blade no?
One question so original corded Andis masters I have the blade on my JRL now so that’s a fade blade ? Does the masters make a taper blade or is a master blade a masters blade ? I see they have different master options I see #22 and #28 for replacement options. Let me know your insight please. I will follow what you tell me to do I base what I do mostly off you brotha.
I don’t know a ton about andis but they do make a taper blade. The 22 and 28 is how many teeth there are on the blade
Hey Sean! I hope you see this - I appreciate all of your help and guidance man, you've been monumental in my barbering journey. Quick question - do you prefer the babyliss graphite taper blade over the DLC titanium, or would you go either way?
what blade would you recommend to use for wahl seniors?
I always used the Wahl taper blade #1006
Is the bestbomg clipper good for barber purpose?
Hi, I have a question: when you tighten the screws after adjusting the blade, do you do it with all your strength? so to the maximum? or
do you tighten lightly until the first stop? Regards and thanks for the guide!
There are two pieces, one for the screws above and the other below it, and there is a long slit. You must place the second piece exactly in the slit, then adjust the screws tightly.
Sean, for the average hobby cutter on friends and family.. i have the magic clip with fadeblade and it sometimes snag, as you mention.
Would you go with the 1006 taper wahl blade or the SC fusion / taper blade on the magic clips?
Either one. The fusion is my go to now but haven’t put it on any wahls. The ole faithful 1006 always did me fine 👌🏻
What taper blade do you recommend
For wahl seniors?
Wahl taper blade is fine. They’re all similar though
yo sean can I put a babyliss or wahl taper blade on my gamma boosted or Am I better off buying a sc/gamma taper blade?
Yes they all fit each other
@@Seancutshair Any taper blade you really like at the moment?
This video answered every question I had about this topic. Such quality information and media also. Did you end up doing the trimmer vid? Also I see now why you have two x ergos on your staton and why. I understand the concept of millimeters you break down in some vids. Def replacing a couple clippers with fade blades def my FX’s. Thanks bro. Again.
👌🏻👌🏻👌🏻
Can you mix and match the top and bottom of blades? I want two different colors so I can see where the actual cutting blade is. I just started cutting so it’s hard to see where the cutting blade is when the lever is open. That white cutting blade you have is probably the best for contrast on dark hair right? Can I put that under my gold babyliss pro wedge blade?
It depends some blades are interchangeable but not all. Would just have to try
@@Seancutshair Oh awesome thank you! From your experience, do you think a brighter/different color cutting blade would help you see it while cutting?
Will the fade blade also rattle the guards if zero gapped or just the taper blade ?? Wanting to switch to a fade blade on my pair as that’s my preference but want to be able to zero gap them all the way without a problem as I feel that’s the best advantage of them is they cut so close zero gapped which lets me get a super clean blend . Also Very informative straight to the point video🔥
Anything zero gapped has the potential to rattle guards
Just ordered the black fx boost+ for my first ever clipper and trimmers, is that wedge blade gonna be something I don’t wanna use ?
It shouldn’t have a wedge blade you’re good
Hey there Sean, love your videos and content. The education here is incredible, especially for new barbers and for those that like to experiment to see what works best for them! I personally like to have all three blades at my station faper, taper & fade blades. I have yet to try the Babyliss wedge blades. Plan on trying those next.
Yeah they all have their place! Wedge is def my least favorite you aren’t missing out!
Please do a video on trimmers!
Maybe soon!
So is the wahl stagger tooth blade considered a fade blade or a taper blade
Can i fit a babyliss taper blade on a style craft instinct or stylecraft ergo ??
Yes it will fit
If you zero gap a taper blade does it change the measurements by a lot? Or it doesn’t really make a difference? Besides taking out the trimmer line
Not a huge difference
@@Seancutshair not enough to change ur fading steps correct I’m asking because I fade without using a half guard only a number 1 but I wanna zero gap my fading clippers
I put my blade super high i dont know if i should 0 gapp it. Or not
I use a taper blade on my seniors to set guidelines and debulk and then use my fade blade on my magic clips to blend the guidelines out
Nice 👌🏻
Can u put the style craft faper blade on any clipper
Not any clipper but most. Andis and oster wont fit
Great video bro! I was wondering, how often do you have to change the regular (taper blade) &/or cutting blade on the x-ergos and how much use on a scale of 1-10 do you put into that blade?
(Asking bcause the gammaplus site says they recommend changing the dlc fusion blade every 1-4 months) but says nothing on the other blades, and I'm looking to get the regular taper blade.
Honestly I don’t hardly ever change blades. I switch clippers often so don’t notice it being an issue. I’d follow their recommendation and I’d imagine it’s the same for all their blades
should I switch to the Wahl taper blade or switch to the masters blade on my senior? I kinda don't like the Wahl Guard system. Seem like it takes longer. I only cut my son and my hair.
If you like the purple guards do the master set up 👌🏻 I personally like the Wahl system but some don’t
@@Seancutshair thanks
You never disappoint. Thanks.💈
🙏🏼🙏🏼🙏🏼
Fuchion blade is something of fade and taper is dope
Honestly it’s mostly a fade blade just has the grooves on it. It’s exactly as thin as a fade blade. I always thought it was in the middle but I’m not so sure
That's true, it's practically just as thin when you put it side by side.
Hey question, does the fusion blade work on other brand clippers like andis and whal?
It would probably fit Wahl but not andis the screw holes are different
@@Seancutshair okay, i was wondering if it'd fit on a andis envy, I wanted to gift it to my barber friend
hi sean, currently owned a wahL detailer, isit worth getting another wahL magic clipper taper? cheers
Detailer is the trimmer right? Magic clip would be a clipper to go with
@@Seancutshair hi sean, whats your thots on the stagger tooth blade vs the wahl prolithium taper blade for newbies like me to use at home?
What do you mean when you say the taper blade is going to cut longer?
It is thicker and has a bevel so if you were to cut side by side to a fade blade it would be longer
Wow thank you for this, this really helped me out !
Good to hear!
Thanks for the info Sean!
I recently replaced the fade blade on my babyliss clipper and since then, it doesn’t cut the same. The cutting blade is just bad. Any suggestions to mod it? Thanks brother 👍🏾
Sometimes resetting it will fix that. Otherwise may need a new cutting blade
Hey man. Great content! Been cutting my own hair for 20 years but did my first bald fade on a friend last week. He liked it.. I had problems with the loprofx battery draining so i returned them. Ive got 2 babyliss fx boost+ coming soon. Going to put a taper blade on one and the other, should I keep the fade blade or will a s|c fapor fit? OR have you tried out the MIM blade yet? Fyi love your channel so much, bought the gold saber trimmer, andis slimline and fx3 foil shaver too! Thank you!
MIM blade is amazing definitely go with that!
I just got troll clippers and I took that top blade off to clean and the cutting blade came off too. When I put it back to how I thought it was now they are crazy loud. I pulled it off and flipped it and it was still crazy loud. Not sure how to reinstall this blade. I’m not a barber, just someone that stumbled onto your page when I needed some new clippers.
Hopefully you figured it out from watching this
@@Seancutshair I put them on the way you did and it’s still loud 😬
The fusion blade is really a fade blade its super thin even thinner than a wahl fade blade. Only difference is the ridges on it, great for the skin line, but cuts very short and unforgiving.
Yeah it’s similar. It still cuts slightly different than a fade blade though
Hey sean do you know if I can put fusion blade on magic clip cordless !
Should fit 👍🏻
another good video. what taper blade are you using on the SC not the fusion one? link please.
I have a SC taper blade but now I’m using the fusion on everything
@@Seancutshair I just ordered the fusion blade will take a while. I put the andis on its working but want to try the fusion. These blades are sharper for sure. I don't see anyone using the andis blades in the sabers.
Yo sean Can I use both as a tandem? Meaning can I put my guidelines with the taper then fade them out with a fade blade or fuzion?
Exactly how I do it 👌🏻
@@Seancutshair i appreciate the reply back. keep up the good content
@@Seancutshair i forgot to ask, what taper blade do you use?
great video my guy! 🙌🏼 currently waitin on my philty mod package to come thru - got the andis master fade blade wit da strrreetch bracket for my wahl seniors, ya digg! 🔥
💪🏻💪🏻💪🏻
Bro Blade for babyliss Lo pro fx what ur choice?
Babyliss taper blade on mine at the moment
Can’t find a gamma/Stylecraft taper blade online anywhere. I want to put a taper blade on my rebels. Will a babyliss taper blade work if I put the regular bracket back on and take off the stretch bracket?
Yes any Wahl/Babyliss blades will work. Check gamma and stylecraft website. And usually Fort Worth barber supply carries them as well
@@Seancutshair you have 40k subscribers but you’re the only one that replies to questions out of the big timers. MUCH RESPECT 🙏🏽
Ok I’ve always wonder about the fusion blade a good reason to buy another clipper with a fusion blade I could sure put it to use a I normally use a fade blade to remove those hard to remove lines especially on dense hair after shaving
👌🏻👌🏻👌🏻
Do you need mod for whal clippers with stylecraft blade?
Shouldn’t. They should be the same
Sean. Can you put a Wahl cutting blade on a babyliss clipper??
Yes you can
@@Seancutshair coo. I want to put the white ceramic blade on my lopros. It makes it easy to see what you are cutting 👌
very useful thank you but you missing to explain ,There are two pieces, one for the screws above and the other below it, and there is a long slit. You must place the second piece exactly in the slit, then adjust the screws tightly.
Nice vidéo bro From Paris ! We can change the blade on Gamma boosters to ?
Don’t know the gamma boosteds but I’d imagine
THANK YOU SO MUCH FOR THIS VIDEO !!!!
Welcome!
Hey bro, I just bought the Babyliss trimmers and it kept tugging me when doing my neck. I Checked on the alignment and I oil them up too and still snags. Not sure if I need a new blade or what. Or just sharpening it?
Just needs to be adjusted right. Try it a few times until you get it where it doesn’t snag
If the master blade is a true faper blade then is it worth modding my wahl instead of buying the gamma fusion blade?
I don’t understand. The master has a taper or fade blade. Fusion / taper is totally different
What clipper do you use/recommend to take the bald line out??
I use my slimline, same thing I put it in with
So you use the taper blade mostly to fade and the fade blade to take out the bald line??
I personally don’t really use fade blades. But that is what they’re each better for. A taper blade doesn’t really take the skin line out, but the open section is longer and makes some of the rest of the fade easier
@@Seancutshair I see what you mean! Thanks!!
Just ordered the snap fx as my first clippers. Looks like I may need a taper blade as well😅
Nice! You’ll dig em!
@@Seancutshair does the Taper blade FX803b fit the snap FX?
@@TheRealKruzix all BaByliss blades are interchangeable.
All fx come with a taper blade
I know you probably answered this before but can you put a S.C faper blade on Wahl magic clips??
Yes
@@Seancutshair thank you!!
That fusion blade seems similar to the wedge blade that came on my lopros
I wouldn’t say fusion is like the wedge. It’s more like a fade blade with the grooves from a taper blade
Dope little class bro.def a taper blade fan,but like the fusion blade for sure .
💯💯💯
Any performance difference in the taper blade when it comes to different brands? I’ve only ever used gammas since it came with the x ergos
No should pretty much be the same
Would a gamma or style craft taper blade fit a wahl senior or should I just get the andis on it with the philthy mod?
Yeah it fits. I don’t love the purple guards so I stay away from the andis system.
Is the wahl 100 year anniversary Clipper considered a senior? Was wondering what I can put on my 100 year anniversary Clipper ? I don’t wanna do that andis philthy mod either … plz get back to me I’d appreciate it fellas 👌🏽
@@SeancutshairSean can you reply to my comment bro I’d appreciate it
Awesome info man. Do you think a clipper with the fusion blade works alongside a clipper with a taper blade better with or without the stretch bracket on the fusion blade?
Have always used a fade blade but I’m planning on throwing a taper blade on my magics and a fusion on my gamma boosted, not sure whether to use stretch bracket or not on the boosted
Fusion with the stretch gives the open closer to a taper blade and closed like a fade
Not quite as open as a taper though? Can you still work under the taper with fusion with stretch?
So Sean, you dont use that Seniors mod with the andis blade anymore? You did a dope video on it so i was wondering if you still use that mod seniors and if not, why so? Salute
I don’t. I really don’t like the purple guards so went back to the regular blade
hey, does the Gamma Fusion blade fit the Pro Fx without any problems?
I don’t know for sure but I’d imagine it would fit
@@Seancutshair Ok thank you, and what blade can you recommend for a better shading effect for the Fx Pro 8700?
I changed the blade on my seniors for a gamma taper blade and my clippers turn off randomly now and won’t turn back on until I connect them to power. Any ideas?
Make sure their oiled well and that it’s not on too tight. Sometimes if it’s too tight and can’t move freely enough they might shut off. Never heard of that on a senior but on other stuff. That’s what I’d try
@@Seancutshair it turned out to be the tomb45 battery. I swapped the oem to the tomb45 when I changed the blade. I changed it back and it worked fine throughout my cut today.
@@Elniniss dang. Send an email to support@tomb45.com and they’ll get you a new one
What tapper blade can b used on babyliss low pro
Any Babyliss, Wahl, gamma blade
The first barber channel I have subscribed on after watching tens of them.
Love to hear it 🙏🏼
What taper blade would fit a Style Craft Rebel??
Any of them should
Should i have a taper blade zero gapped on my seniors and then use my zero gapped magic clips for detailing?
Just preference. I don’t zero gap my clippers just my trimmers
@@Seancutshair thanks for the reply man, im new to cutting so i dont know whether to use either a taper or fade blade on one clipper or use the same on both clippers
The fusion blade is like the andis master blade pretty much
No it’s more like a fade blade
Where do I buy taper blade for gold magic clipper ?
I always look on Fort Worth barber supply they carry a ton of blades
Whats the Cerematic blades then???
Which fade blade doesn't get stuck on clients pores? 🤔
I don’t use any fade blades partially because of that so I’m not sure
what if you put the stretch bracket on the wahl senior with its wahl back blade and ceramic cutting blade? will it extend to a 3mm from a 000?
also at 7:30, can i still do regular haircuts with that sc blade? like if i throw on a 1 or 2 guard, will it be effective in cutting hair cleanly with that taper blade?
I don’t know the exact measurements. It all still cuts the same just different blades depending on if you want your closed clipper shorter or open clipper longer
@@Seancutshair gotcha, thx bro for what u do
I just purchased the faper blade to put on my gold magic clips. The fade blade on the wall seems to have nearly identical dimensions to the faper. Is there really a difference? Or is the stylcraft fade blade just so thin that the faper is middle ground between stylcrafts fade and taper?
It’s pretty close to the same but the faper has ridges on it to be more like a taper blade
@Seancutshair what difference/advantage do we get with the ridges?
@@Baldsohard365 couldn’t tell ya just saying that’s why they says it’s somewhere between the fade and taper blade. Basically a fade blade in thickness though
@Seancutshair yeah. That's the part that confused me. I bought the faper to get smoother blends. The saw it was almost identical to the fade blade. What I did notice is that the flat surface of the regular fan blade has increased tension when sliding across my finger. While the ridges on the paper blade reduce the tension and gives it a smoother stroke. Hopefully that translates on my next cut. Which will be a while since I'm a home Barber who only cuts my family's hair. LOL. I appreciate the reply. Keep up the great work
*fade
YO. That is a SICK hoodie. I need the Fusion blade to fit the seniors.
It would fit!
@@Seancutshair WHAT
In prison I cut hair with comb and razor so the regular chamillion fade blade on my babyliss is still like a luxury compared to that. Works pretty good. I may have to try the taper blade though. Great video bro. Which taper blade would you recommend for my babyliss lo pro??!
All the taper blades are pretty similar. I use Babyliss on Babyliss, gamma on gamma, etc.
Awesome thanks so much!
Fire hoodie 🔥
🙏🏼🙏🏼🙏🏼
What do y’all recommend for a beginner barber? Taper or a fade blade?
Taper blade for sure! More forgiving
Very informative vid! Do a trimmer one as well
I’ll work on it!
can you share your other clipper to me hehehe so impressive i learned more your content
Good to hear!
How does the wedge blade work
Don’t have one waiting for those lo pros and I’ll see what it’s about
Isn’t a wedge blade the same as a regular master blade ( one shown in video ) ?
@@Giovany03 not sure I haven’t seen one in years
Great video thanks!
You're welcome!
Hello, why do i cut with a taper blade better then a faper blade ?
Taper blade is more forgiving and cuts a little softer
@@Seancutshair Okay thanks
Does the ergo taper blade fit the rebel ??
I would say so they should all be the same