Should You Use a Iron Remover In Foam Cannon?
Вставка
- Опубліковано 18 жов 2019
- SCOTT WITH DALLAS PAINT CORRECTION SHOWS A IRON REMOVER USED IN A FOAM CANNON
dpcdetailing.com/
Products Used:
1. Maxshine Snow Foam Cannon Foam Lance - amzn.to/3cPB74X
2. Meguiar's Wheel and Paint Iron Decon - 1 Gallon Jug - amzn.to/2vIIRoD - Авто та транспорт
I was just looking for this, I swear you read our minds.
We love you Scott.
Great video Scott. A lot of people are asking about doing it in a pump sprayer with some soap. I know you know the answer to this. It will work far better than in a foam cannon. Hey another excuse to use the marolex sprayers 🤣🤣🤣. We love you man. Keep it up
Another great review and demonstration! Eagle One needs to send you a big pallet of that juice for all the promoting you do for them!
Great video Scott, thanks for the tip buddy! 👍👍
Great Video Scott.. How about using the eagle one straight in the Marolex foamer and see what it does. maybe a middle tip for a firmer foam to sit on surface longer..
Keep em coming brother
Love your videos. I've learned a lot from you & your no BS videos. My question is could I possibly use an iron remover & a wash prep wax & sealant remover at the same time in the foam cannon to save time???
Thanks for taking the prozak Scott and getting back to the car videos. Would like to see the same example just in a pump sprayer with no dilution.
That's what I did for the rear of the vehicle that I showed in the beginning of the video.
You sure I need Prozac?
Just teasing my friend😜
@@dallaspaintcorrectionautod8343 thanks for clarifying keep up the good work
Thank you for the videos!!
I have the same Infiniti, nice rigs
How bout in a hand pump up foamer non diluted?
I was thinking the same as soon as i saw video 👍
Or just a non foam pump up sprayer, I'm sure both would work.
I just bought a pump sprayer waiting for it in the mail and want to try that.
So, I got my pump foamer in the mail yesterday. And no. It doesn't work because you need to dilute with water unfortunately. But I'm assuming a regular sprayer would work
Yeah that works cause u aren't adding any Water to it
Hey Scott, I think diluting and atomizing the product with pressure washer specially in foam canon is restricting iron removers ability to decompose iron particles.
I have tried using ironX with handheld spray foamer without diluting the product and it worked. As a result it clogged and oxidized brass nozzle. Lesson I learned is spray foamer with Brass nozzle needs to be cleaned right away.
Since Marolex products does not have brass nozzle so I am guessing it will neither clogged nor rust. I need to get my hands on Marolex sprayers.
If I am Dallas next time around can I pick Marolex sprayers/foamers from a retail store?
I have used Griots Garage Iron remover with their foam cannon and works great. Must be a stronger concentrate.
Next video....in a Marolex sprayer
Dustin Williams, you take out my words
No point makes the lance stink and it’s too diluted
I would spray the iron renover on a dry paint, let it work for a few mins and the put a layer of foam on, let it all sit on the paint for a few mins and then spray it all off using the preasure washer
Just too much water, for a foam cannon specific iron removal, not even the cleaner's fault, its just not made to be used that way. You're much better off with a foam cannon specific product, like CarPro IronX snow foam. Actually would *love* to see your review and thoughts on the product, Scott! 😀
Am I the only one that can't live without lots of handheld pump sprayers and foamers? I own several dozen and always have 10+ of them in rotation. I have dedicated units for rinseless wash, APC, clay lube, wheel cleaner, and *iron remover* etc.. They save more time than you'd think, and also your forearms! I can spray iron remover around an entire vehicle in a minute or two, while maintaining very efficient use of product!
Ive tried countless brands, in all honesty, some of the cheapest sprayers I like the best. A no name "wallpaper remover" branded sprayer I got at a garage sale for 50 cents years ago is still the best all around sprayer. I'd pick it over most high end units I've bought.. but Ive never seen another one like it.. For foaming specific units, *definitely* go with a Marolex, they really are the best.. and I've tried them all.. 👍👌✌
Please make the next video of using this in a Marolex foamer on the other side of the vehicle! :)
Michael Juan was going to post the same comment
I was thinking the exact same thing, why didn't you think of that Scott, you even had it in your bathroom.😄
Why not just use it through regular hand pressure sprayer like a small garden sprayer. You're not going to get much foam out of it no matter what you do. And I'm sure the acids that are in it are not going to be very healthy on your sprayer so why not just use a cheap gallon or half gallon garden sprayer instead of a expensive foaming one
@@edheinz4134 Yes that works as well,but he sells these Marolex.
Instead of pouring into a foam cannon I’d think using a garden sprayer would be better for fast delivery. It won’t get diluted at all
Probably want to try using one of your fancy new sprayers. Maybe.
I wanted to put this stuff on the car to remove the iron and reapply the turtle Wax shine and seal will it strip the old stuff off?
if this is iron remover, does it affect the metal of the car knowing it is steel or iron in a rock chip or the rotors?
Car pro iron x soap gives us your review Scott
What if spraying iron remover straight and right after we wash, skipping one rinsing? I have water problem as well as time consuming process
How bout a hand pump foam sprayer not diluted I'd like to try it this summer since I needed one anyway
Put foam shampoo and iron remover at the same time in cannon and then use
Nice
Isn't the foamer piece inside the foam cannon made of steel/iron(generally)?
Hello Scott. I love you videos. How about using the iron remover in the Axel 2000 manual pump? Keep up the videos. I’ve learned so much.
TACSYSTEMSUSA has a foam iron remover that I have had good results with
Some mnfctr?memory fails me.just put out a combo soap/ iron remover.look into that and try it out.thanx.
What is best foam connon and foam
Scott, can I use eagle one over ur ceramic coat that I put on months ago???
Yes if you have iron present on paint.
We don't want to use iron removers say every month.
Just use them when needed
I think it needs to be sprayed from something that handles paint. Something like a Wagner paint sprayer, maybe? That way you're not introducing a bunch of unwanted water in the mix.
'Course, a better hand sprayer would probably be cheaper, but not as much fun. :-)
Has anyone had good results with Carpro iron x snow soap?
Does the car need to be dried when using eagle one on the paint.
It's best if used on dry paint
I was going to try it out in a ik sprayer???
I bet that would work just fine because it's not being diluted with water. 👍
@@geo7809 This product works fantastic in a pump sprayer. Less stress on the hands. 👍
I do that then spray more on the foam
Scott I have turtle Wax shine and seal on my car
Can’t find This stuff anywhere
That must have smelled overwhelming. I can barely deal with like three spritzes before the oxalic acid smell just crushes my soul.
Wear a respirator-protects you and then you're not smelling it.
It’s not only the water diluting it’s mostly the aeration of the product causing this method to fail.
Looks like you had fun... those bottles are garbage but not unusable
I would think your diluting it and with the water it doesn't give it time to cling enough.
CarPro Iron-X Snow Soap does a better job in a foam canon, but to be honest the most effective iron remover is Carpro Iron-x Paste or ValueGuard ABC.
Ok so 1st of all you rise the car then you foam it then you either clean it with a micro towel or mitt then you
You left out that you could use it straight in a hand pump pressure sprayer
That's what I did for the rear of this car and showed you the purple action using the cleaner straight
Answer is no thanks Scott
Anything in a foam cannon is gonna be 30:1 or higher
When are you going to address your beef with pan the organizer
Gerardo Perez what! What happened 😂
Lol go check out pans IG page and you’ll see his posting about Scott talking shit due to him reviewing Extra Tough
It’s why he didn’t go to the Turtle Wax event with the other UA-camrs.
I don't have a foam cannon, but still good to know
Yep. Its a shame. Great product, horrible sprayers.
Shame?
I would pay 5 dollars for a iron remover at 23oz even without a sprayer all day long
@@dallaspaintcorrectionautod8343 Let me rephrase. Its a shame I have to throw away the sprayer every time I buy a bottle. 😉
Why not save some sprayers out of a few spray bottles from household cleaners to detailing products. Then throw away this crappy sprayer and put a replacement in the original product bottle. I have done that when a sprayer failed to work properly. I wouldn’t go to all the trouble and expense of buying foamers or sprayers. You don’t need to spray the entire vehicle; just the lower panels where the iron is most likely to be. That does not take a lot of pumping with a finger sprayer. Also, you don’t need to do it every time you wash.
@@baklash6079 Thats what I do. I think Scott thought I wouldn't buy the product. I love Eagle One, just hate that Im wasting plastic every time I throw a sprayer away.
Then you rise it again then you use an iron remover then you wash it or foam it then you rise it then you clay it then you wax it or polish it if it needs it then you wax it then you or ceramic it 🤪 😏?
You forgot to use a clay bar with the iron remover Scott 😊 jk