Ball Head for your Deathgrip Tripod.

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 29

  • @cdiver-3242
    @cdiver-3242 2 місяці тому +4

    Followed your tips and directions. You, sir, are a genius! Works perfectly. Thank you.

  • @ES44AC-2
    @ES44AC-2 3 місяці тому +4

    Using the spent cases is a fantastic idea.

  • @shannondennis1021
    @shannondennis1021 19 днів тому

    I don't know if anyone is interested, but I will let you know the change I made to this set up. Instead of the spent brass, I used a cheap 8mm thick kitchen chopping board. I used a hole saw to cut the 6 pieces out, then sanded the edges off and pushed them inside the tripod. then using a 9mm drill bit, pushed it down through the middle (middle was already drilled out by the guide bit in the hole saw). Im in Australia hence mm. the middle of the tripod shaft gets tighter, but a hammer on top of the bolt and washer will get it in. works a charm!!

  • @MrLNielsen
    @MrLNielsen 5 місяців тому +1

    A million thanks. Never liked the vise clamp option.

  • @wesleybray3046
    @wesleybray3046 Місяць тому

    Thank you. Great idea with the spent cases.

  • @mikesauer7775
    @mikesauer7775 5 місяців тому

    Just went thru all that shooting rats in eastern Oregon. Had to keep leveling deathgrip to keep my windage correct. Thanks for the great info!

  • @crazyeyes1533
    @crazyeyes1533 4 місяці тому

    thanks for sharing! damn I just seen your video, and I just converted my over last week! using washers I tig welded together because I couldn't find any fender washers! Seems to be working great with the amazon ball head! Bolted a $10 amazon 10" long generic swiss arca rail onto the bottom of my tikka rifle and everything is great!

  • @kenjohnson958
    @kenjohnson958 2 місяці тому

    I bought the ball head adapter works great

  • @johnleca
    @johnleca 3 місяці тому +1

    good video, your funny! good work! you got a friend in Pennsylvania.

  • @mikepi660
    @mikepi660 4 місяці тому

    Thank you,, I will use your info, especially the ammo casings,,,,

  • @johntalbot119
    @johntalbot119 5 місяців тому

    Thanks CD! Did this couple weeks back and love it. (without 223 shims/great idea)

  • @161Sheriff
    @161Sheriff 5 місяців тому +1

    Hey. I know you like the 300 ford inline 6. We have talked before. I spent a lot of money and built a pretty hot one. 295 torque and 250 hp to the wheels. All on a 2 barrel carburetor. If you want to see the dyno run let me know

    • @cavedweller1959
      @cavedweller1959  5 місяців тому +1

      Hell yes!!

    • @charlesmullins3238
      @charlesmullins3238 5 місяців тому

      Son they’ve run everything from sawmills to gas/oil wells round here nit countin the cj’s…rode to high school ina buddies 79’ and damn if we didn’t put it through hell and she kept chuggin..ima 4.3 kinda guy..

  • @pauliehotdogs9495
    @pauliehotdogs9495 5 місяців тому

    Nicely done, thanks for the instructions.

  • @cw2a
    @cw2a 5 місяців тому +1

    I JUST DID THIS!!
    8/8 is my video release!
    GREAT UPGRADE!!

  • @Wheelchair-bear
    @Wheelchair-bear 3 місяці тому

    Thank you!

  • @clayshooter81
    @clayshooter81 4 місяці тому

    Thank you

  • @RockyXTR
    @RockyXTR 5 місяців тому

    Great vid! Can you post the Amazon link to the ball head?

    • @cavedweller1959
      @cavedweller1959  5 місяців тому +1

      www.amazon.com/CAVIX-Tripod-Swiss-Release-Aluminium/dp/B0CJ4V2KDX/ref=sr_1_2?dib=eyJ2IjoiMSJ9.WCAbY1wmaeH_VBsn4E9qfDCc0PKlpeZ8TmdX4Mq-CR95tDv5D5lBCQz1yx7cc2B39XSvrsTgvgB

  • @justanobserver530
    @justanobserver530 5 місяців тому

    Excellent idea !

  • @stevewilson5743
    @stevewilson5743 4 місяці тому

    You say you are converting that for a camera. Would that ball head be suitable to use for a 12 to 16lb. rifle? IYO

    • @cavedweller1959
      @cavedweller1959  4 місяці тому

      It's a 42mm ball, max load of 44lbs. I think it's the same size as the new tripod ball head. When the heat wave breaks, I'll get them both out & switch them back and forth in the real world.

  • @bryophytamantodea7254
    @bryophytamantodea7254 Місяць тому

    Great vid

  • @baraj062
    @baraj062 5 місяців тому

    Tek parça sopa gibi hem atış yapıyorken hem fotoğraf makinesi çekim de kullanmak için tripod veya benzeri bir şey var mı acaba
    Teşekkürler

  • @lovethe43rdstate
    @lovethe43rdstate 4 місяці тому

    Just did mine thank you

  • @Frostytravels
    @Frostytravels 4 місяці тому +1

    Well F_ _ k me....man that was brilliant...well done. Put a washer on the top of the casings and it slides perfect. Also you can get a ball bearing washer Flat type to put on top to rotate.
    ___

  • @garyhopkinssr8561
    @garyhopkinssr8561 5 місяців тому

    👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾✌

  • @scrobeaa
    @scrobeaa 5 місяців тому

    Good review, thanks CD, now go pour yourself 3 fingers