you are a rockstar!!!!! I've been trying to get my buddies bike going for almost a month now. Nowhere in the manual did it ever say that the volts needed to be cut down like that. you just added at least a week to my life!!! thank you
Yea it took me an entire summer to figure it out. Im glad this video has helped alot of people. Its such a common issue that is always over looked and hard to diagnose.
Brother send me a couple I'm broke but my bike street glide 2019 won't start they tried steeling it and riped off my ignition now not sure how to get it to turn on and idea?
Hello friend, the same thing happened to me that happened to you, I bought the suichera from ebay and could you tell me exactly which cable is the one that I should bypass.
Thanks! This was really useful. I have 8 volts, I have shorted the kick stand switch but still no start. I guess next stop is pulse generator then cam position sensor and crank position sensor?
I picked up a 94 gsxr750 with an eBay ignition po couldn’t get a spark. I put the resistor in and still no spark. I measure voltage at ecu and it’s only getting 1.8volts from the ignition. It needs 8?
Which wires would you have to add the resistor to on the eBay/amazon ignition switch with a white plug instead of green, I do not have the original ignition switch. Engine swapping into a quad, harness is hacked up, have no spark
The points should be in the same place might need the wiring diagram of ignition barrel for your model though and test it with a multi meter with resistor from live wire to the white plug I assume on your Amazon barrel and use the metal 100 ohm 1watt not the garbage ones he’s using.
hey man will you send me one please i had a couple idiots stole my bike but i got it back i walked up to the spot i heard it was and i grabbed it back but they cut my ignition off with a grinder but the bike now u can smell fuel but cranks forever no fire soooo im assuming i got no spark ive rewired it but no fire soooo im hoping that this resistor will help me get my katana to start
I have no power ZERO POWER when I turn key. Could my ignition wires have gotten blown out to where I don't have the right reading and it cause a complete no power issue? 03 gsxr 600
If you put more than 8.5 volts to the ecu the security system will be activated. It wont hurt it any but It will kill the spark. The ecu thinks your trying to steal the bike by hot wiring it with 12 volts. The only way around it is using a resistor.
Not sure what a statchiometer is... but a small led light blub will work. Try a few different ones. Basically you need to take the 12v and make it 8.5. Then the ecu will think the security passed and send signal to the coils for spark
Employed_By_The_Devil no im near philly PA. Just bought a bike that was sitting at a tow yard for 7 years and was going to be a stunt bike and im trying to get it running and riding and so far it will crank wen jumped but not start. Wired the cluster back up cuz it was cut off but nothing happens on cluster and no spark. U have a FB or IG to chat?
Cut both wires on the ignition side so you dont mess up your main harness. Then connect the b/w and o/r with the resistor on the plugin side. Leave the b/w and o/r hanging from the ignition its self. Just tape them up there not used. The bike harness needs the resistance not the ignition/key its self.
This saved me alot of headache,time and money,and also it helped me to know more about electrical shit!good looking out brother
you are a rockstar!!!!! I've been trying to get my buddies bike going for almost a month now. Nowhere in the manual did it ever say that the volts needed to be cut down like that. you just added at least a week to my life!!! thank you
Yea it took me an entire summer to figure it out. Im glad this video has helped alot of people. Its such a common issue that is always over looked and hard to diagnose.
Very helpful Video! Thankyou for taking time to make it
Brother send me a couple I'm broke but my bike street glide 2019 won't start they tried steeling it and riped off my ignition now not sure how to get it to turn on and idea?
Worked great!!! Thanx for the awesome video!
Hello friend, the same thing happened to me that happened to you, I bought the suichera from ebay and could you tell me exactly which cable is the one that I should bypass.
Appreciate the video. Hopefully works for me.
What would make my gauges only light up with the ignition switched to park?
Thanks! This was really useful. I have 8 volts, I have shorted the kick stand switch but still no start.
I guess next stop is pulse generator then cam position sensor and crank position sensor?
You can check both with a multi meter. I sold this bike years ago but I found good info on the gsxr forums
I picked up a 94 gsxr750 with an eBay ignition po couldn’t get a spark. I put the resistor in and still no spark. I measure voltage at ecu and it’s only getting 1.8volts from the ignition. It needs 8?
Which wires would you have to add the resistor to on the eBay/amazon ignition switch with a white plug instead of green, I do not have the original ignition switch. Engine swapping into a quad, harness is hacked up, have no spark
The points should be in the same place might need the wiring diagram of ignition barrel for your model though and test it with a multi meter with resistor from live wire to the white plug I assume on your Amazon barrel and use the metal 100 ohm 1watt not the garbage ones he’s using.
I did that. and it did work. but it only works in park. not start.. any idea why???
I'm only getting 1.8v at the red and orange wire at the ecu. With the igntion turned on. And a full battery.
Hey man great video. Question do you need 1 resistor for.both cables or 2?
1
Hey man trying to wire my ecu from scratch have tried manuals the internet but can't find hat I need I need to know what every pin is
I need a resistor how do I get one from you i would like to try it
I put a new 100 ohm reistor on my 2008 gsxr 600 and im getting 100 ohms but my voltage isnt dropping!!! Ugh im so tired of this, im stumped.
What size resistor did you use since I'm in the same boat right now
hey man will you send me one please i had a couple idiots stole my bike but i got it back i walked up to the spot i heard it was and i grabbed it back but they cut my ignition off with a grinder but the bike now u can smell fuel but cranks forever no fire soooo im assuming i got no spark ive rewired it but no fire soooo im hoping that this resistor will help me get my katana to start
Hey mate just wanted to know if I could buy one or two of those off you if possible
Im currently out of them. You can order them on ebay or Amazon for a few bucks.
Hey what sizes resistor fuses do u sea
I have no power ZERO POWER when I turn key. Could my ignition wires have gotten blown out to where I don't have the right reading and it cause a complete no power issue?
03 gsxr 600
Check the main fuse?
How much for the resisters? I have this exact problem
Thank you “ I bought a new ignition off eBay for a hayabusa and was going insane trying to figure out why I wasn’t getting spark
What year bike and size is yours? im running into this problem with a 03 gsxr 1000
98 600. I believe the 03 has the same issues
Thank you very much
Can I do with Suzuki impulse gsx 400
Where do I send that couple of bucks cuz I got a crappy eBay ignition
I dont have any resistors left. This video is old. But you can order the resistors from Amazon for cheep.
Still have those zener diode
Or what resistor do I need
Yo what resistor do i buy ik i need 100ohm but what %?
@@scootertuningfl2174 1/2 watt
If you try jumping it does it fry the ecu?
If you put more than 8.5 volts to the ecu the security system will be activated. It wont hurt it any but It will kill the spark. The ecu thinks your trying to steal the bike by hot wiring it with 12 volts. The only way around it is using a resistor.
How can I get one.?
Will a statchiometer work in place of the resistor?
Not sure what a statchiometer is... but a small led light blub will work. Try a few different ones. Basically you need to take the 12v and make it 8.5. Then the ecu will think the security passed and send signal to the coils for spark
What you mean by small led bulb
Thanks, pa'l.
Still got some resistors?
I do not. Sold them with the bike years ago. You can get them on Amazon for next to nothing
Will the cluster and everything else still get power without that resistor or does not having that cut off power to everything?
The cluster gets power from the ignition. Weather the resistor is good or bad. Any chance your in the wiaconsin area?
Employed_By_The_Devil no im near philly PA. Just bought a bike that was sitting at a tow yard for 7 years and was going to be a stunt bike and im trying to get it running and riding and so far it will crank wen jumped but not start. Wired the cluster back up cuz it was cut off but nothing happens on cluster and no spark. U have a FB or IG to chat?
So leave one side of B/W and O/R hanging and one side together with the resistor in the middle? Which do i connect and which leave unconnected?
Cut both wires on the ignition side so you dont mess up your main harness. Then connect the b/w and o/r with the resistor on the plugin side. Leave the b/w and o/r hanging from the ignition its self. Just tape them up there not used. The bike harness needs the resistance not the ignition/key its self.
Subscribe to my channel. Ill make a more detailed video explaining it better and show you exactly what i did to my bike to make it run
the thing you bought from amazon what is it called?
You can get the resistors on Amazon. You can also use EL wire.
call me dude
770 4802006
Dont got very good cell signal where i live but i sent u a text
Do You still have any resistor?
Im all out of them. You can order them from Amazon or ebay. Its about 6 bucks for 100 of them
can you send me a couple of them?
How about a resistor on every wire🤣
What resistors do you use...
Can I get a couple
Hey do you have anymore of those resistors I need one badly please reach back out to me when you are available thanks
Havent had any in years. You can buy them on Amazon/Ebay for a few bucks tho.
You could send me one of them resistors for free if you want ?
Hey i need yr contact bro please help me out on my gsxr
Dm me on Instagram. My ig is wisco pit bike
I need your help with my bike also please need a couple of those resistors
Hey
Stop smoking bitch
Send me a resister plz
I'm all out of them. You can order them on Amazon or ebay.
Po box 971 peralta nm 87042
You can get them on Amazon for a few bucks. I dont have anymore other wise id give you one.