Project Mr. F - Ep. 5 Front suspension, firewall, and pedal box.

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 14

  • @M22.C0bra
    @M22.C0bra 11 місяців тому +1

    Love the videos. I'll be building my next year. Something on the windshield wipers, you may want to check your local laws for registry. They may require them. You could always look at the manual ones and then remove them after inspection. 🤘

    • @carsarepeopletoo9450
      @carsarepeopletoo9450  11 місяців тому +1

      Thant's a great suggestion! I did check that for my state when I was making the decision to order the kit. Thankfully, wipers are not something they check for.

  • @rbyikes
    @rbyikes 11 місяців тому +1

    I was recently caught out in fog and mist, not rain, but needed the wipers to be able to see through the windshield. Glad I had them.

    • @carsarepeopletoo9450
      @carsarepeopletoo9450  11 місяців тому

      I’m still thinking about it. I’ve ridden motorcycles quite a bit, so that is part of my thinking, too.

    • @rbyikes
      @rbyikes 11 місяців тому

      I always checked the weather before I rode. only got caught a couple times but it happens. I replaced the bikes with the car, and I still find myself checking the weather befrore I take the car out. @@carsarepeopletoo9450

  • @bobk3840
    @bobk3840 11 місяців тому +1

    Did you put a radius in that brake pedal notch? You don’t want a stress concentration in that area. Just a thought.

  • @cobrar85
    @cobrar85 11 місяців тому +1

    Great work on the Cobra and videos. Just to let you know, your audio when you talk is only coming out of the left channel. You don't have stereo audio when talking. My right ear would love to hear whats going on. Keep it up!

  • @rbyikes
    @rbyikes 11 місяців тому

    when it is cold outside, the glass will get condensation, and fog. the defroster will keep it clear. Ask me how I know. No blend door, if you close the lower vents you will get more defroster. When mounting the heater box, I used captured rivet nuts with a machine thread on a metal plate that went from side to side to hold the position of the threads to make it easier to get the machine threads to start.

  • @jeremymastin7005
    @jeremymastin7005 11 місяців тому +1

    Love the videos, but as mentioned before your audio is not in stereo AND the music volume is MUCH louder than your voice!