Fender Removal - C6 Corvette Build - 8

Once the bumper cover and the headlights were out, I saw just how dirty everything was. It's time to remove the fenders. Once the fenders are off, I can properly clean everything underneath them. Here's how to remove fenders from a 2005-2013 C6 Corvette.
Tools that you'll need:
1. 9/32 socket
2. 10mm socket
3. Flathead screwdriver
4. Torx T15 screwdriver
Remove all of the T15 Torx screws from the top of the fender. Once the screws are out, remove the rubber/plastic piece that's separating the fender from the windshield: there's another T15 Torx screw underneath there too. Remove the 6 clips and the two 10mm bolts underneath the car that are holding the wheel well liner. With the wheel well liner removed, you'll have a good look at the 9/32 bolt that's inside of the fender (towards the firewall). This needs to be removed. There are another two 9/32 bolts underneath the car holding the fender in place. Finally, there's one 10mm bolt towards the front of the car, underneath the headlight area that's holding the fender bracket in place. Remove it and the bracket comes off too.
You will have to remove the bumper cover first. If you need instructions on how to do that, here's my video on removing the bumper cover:
• Front Bumper Cover Rem...
TOOLS
Gearwrench Phillips/Slotted/Torx Screwdriver Set
amzn.to/3082fb2
Passthrough Socket Set
amzn.to/3f7asQV
--
Follow the full project on Corvette Forum
www.corvettefo...
C6 Corvette Project Playlist
• C6 Corvette Project
Connect with me on Instagram
/ car_mod_guy