Ok I thought my slim wasn't gonna work again till I watch ur video an I got it working again cuz of ur knowledge of Xbox thanks a lot bro thanks for your help
Thanks for the advice about the power brick. I didn't actually have to replace mine, but nonetheless I would have never thought to turn my attention to that instead of just the system. I managed to get it going again after just disconnecting it for a while. Problem solved. Thanks! Time for Far Cry 3.
Thanx you really helped me my power brick was not working i had the same problem what you had i was like i broke my xbox 360 but just searched about it and found your video i ordered a new power brick and my xbox runs very smooth thank you
My Xbox is having power troubles, and while the power brick fix did not help me, the disk tray tip did. I thought I was going to have to sell my Xbox with Battlefield 3 in it. Thanks so much for the help.
Yep, that was it! I was within a gnats whisker of buying a new XBox, when I saw your video clip. I decided to take the plunge and send off for a new power brick, and I figured that if it wasn't the problem, then I'd only wasted $40 or so (off ebay). Plugged it in, and it worked straight away! Thanks for the tip!
I hope this works for me, I'm having tod same problem, orange light. On power Brock Bit not coming on So hopfully this works when my new power Brick comes in
this was a great to me because I sent my xbox over to my little brothers and it wasn't working and I took good care of my xbox it never scratch but wouldn't turn. I told them to get a new power brick and ill wait for them call me back if It works. thank you very much for your help :)
My power brick is orange but my xbox won't turn on. it makes the noise as if it was on but nothing happens. I've unplugged it and even switched it to another outlet but still the same problem.
Had the same issue xbox froze after 2-3 mins i unplugged it then replugged it back in difference was the power brick was shining red so i unplugged it waited for the light to shut off then i plugged it back in and it works fine now thanks for the help
Omg thank you so much! Was wiring some led strips and the back of the led board arced off the frame! Couldn't figure it out til you mentioned the brick( which was red). Unplugged it and let the light die, plugged it back in and now its working!
Yes i have see this before and it is a relatively easy fix. If you watch my 3 videos on my channel in a row it shows you how to disassemble your xbox. If you have an xbox 360 SLIM! it is probably your internal memory chip. On my 3 video at 3:08 i show me removing that chip i don't specify on what it is in the video but i do remove it and re-install this chip. What you need after you get to that chip is simply remove it and assemble your xbox partially reinstall your fan and your hard drive.
This happened to me just now, i was playing perfectly fine about 4 hours ago. Turned off my Xbox because didn't want to play anymore. few hours later i tried to start it and i heard it was booting up and stuff when suddently the AC Adapter went silent, the power button on my xbox was still screen, tried to turn off the console but couldn't. i could just hear the BEEP sound. It's weird because it worked sooo perfect 4 hours ago.
My son's power brick was red with no power to xbox. Unpluged it from the power strip and back into a main receptical on wall. Power brick is now orange and xbox powers up and works fine.
Hey guys I need help with my xbox 360 slim, the power brick is orange when I plug it into the outlet but whenever I turn on my console, the console just beeps and the lights turn green but only for a half of a second, what do i do?
I had this problem where my power brick was fine but buttons still wouldn't respond. Saw your video, checked my USB and nothing was bent but I pressed down on the USB plate around the ports on all sides a bit and it powered right on. So if anyone else is having that problem where their 360 powers itself off and wont turn back on. Try that
Could you help me? My Xbox live slim won't turn on. It will make the beeping noise but it won't turn on. Also my power box won't come of stand by mode it just seems to be frozen like not enough electricity will go through to power it. Do I need a new power box?
had this issue and researched it by videos, xbox support, etc. etc. checked the end of the chord and the prongs were bent at an odd angle it still plugged in but gave me no connectivity. straightened these out with a pair of needle nose pliars and it is working perfectly! please check this before purchasing a new chord.
my Xbox doesn't even do anything. I bought a new power brick because my old one had a red light and I tried it and still didn't work so I opened my xbox cleaned it out and it still does t turn on... help please
okay. the light is orange and it turns green when I turn it on but after a few minutes it shuts off. I unplugged it from my xbox and it was orange. I don't think I'm going to be able to get a new power box so can I do anything to fix it? sometimes it turns on by itself if that helps with anything
hi, I just recently had this issue where my Xbox 360's controller sync button will not work, so I tore it down to see what is the issue and when I put it back together my power brick shows an orange light and xbox is not switching on.
Hey one more problem with Xbox Slims. If you recently took it apart and it doesn't turn on, try turning it on with a Xbox 360 controller. If it did turn on. It is possible during the disassembly process that the ribbon cable that runs from the power button became unplugged. Simple fix, yes but man it took me forever to figure it out especially when I was trying to trouble shoot a possible power supply problem.
Yes sounds like a diagnosis. Except you still have a dead mother board so try all this. Check all usb ports very well make sure they dont touch as i mentioned. also check your ribbon cable in front where the face plate is. because if you have had your xbox apart you can damage this very easily. Check out my other videos on my page i think they will help there is 3.
Didn't work for me, the USBs are intact, my power supply stays orange, my power supply is plugged up to my system. I've had my system for a month, I'm the second owner and it was working just fine last night. Had to reflow the HANA, checked it out today, wouldn't turn on at all.
Same exact thing with me :( second owner and everything only about a month in a half two months and it already fucking broke and I just bought another god damn power brick too
Gabriel, what kind of 360 do you have? Is it a Xenon, Falcon, or a Jasper (Elite)? The reason for mine to not turn on period was due to my HANA chip, had to reflow it every other day......finally, it got tired of it and just stopped working.
I have a similar problem where I turn on my Xbox 360 it turns off by it self and it keeps doing it, I tried fixing it but nothing anyone have the same problems and you found a solution plz reply.
Keeping in mind if you do not re-install your hard drive correctly with all the connectors connected in there proper positions and your wifi chip isnt removed your xbox will try to connect to xbox live and they will band you!!!! So to avoid this make sure you remove your wifi chip before you try to turn your xbox on. Now simply re-install hard drive fan and just connect ribon cable on the front so you can use your buttons then try to turn it on and see if your home screen loads
My xbox 360 s power brick has a orange light but I think there is something wrong inside of it because it makes a beep but doesn't turn on and my game is in there but I won't come out.
If you haven't fixed it yet,Grab a toothpick or something small and on the side of the disk drive on the grill is a yellow part with a hole that will manually open the disk tray and get the game out
Alright everybody!!! I commented the other day about a yellow power brick source issue where my system would turn off and on on its own. So the issue is NOT the POWER SOURCE BAR!!! It's the sensor that communicates with the actual on and off sensor and ribbon. Be very careful when taking the ace plate off with the ribbon and replace the actual part between the touch pad button and hardware for the button. Clean it with a duster, of that does not work it cost me 15$ for the part.
Hey just Killak I had this problem try unplugging the xbox plug it into another socket then (just the power brick and the xbox no tv) plug it back into the original socket it worked for me hope it works for u :)
Pro tip, the lining beside the usb port could also be not were its supposed to be. easy no dismantle fix. just use your finger to put it on the surface and then your xbox should work again.Your welcome!!!
I have an issue with my xbox 360 s, PLEASE HELP. The problem is, my console "I think it's working fine" the power button is green on the console. But, it's not displaying anything in the tv it just says that there's no wire connected or something. The hdmi cable is fine every wires in the xbox is completely fine but it does not display the xbox 360 logo thingy on the screen, it just says that no signals or wires connected to the tv. I checked the wires, the tv is fine there's no prob with tv. The last thing happened was, I was playing a game then the game just went distorted and stuff, I turned it off and on again and the next thing that happened is the power button on console is green but the it does not show anything on the tv
Well it seems like you have a history with the power bricks. So that would be my first guess. Try repluging in your old power brick that turned red see if you get anything out of your system. If the powerbrick has absoulutly no light on it even when it is unplugged from the system there is something going on with that powerbrick. Try maybe a different outlet plug in your house also. you could have had a powerserge witch is what that power prick is for is to protect your system.
i bought a xbox 360 slim, i have only had it for about 5 months and i was playing it and it randomly shutoff and never turned on again!!!! so i bought a new power supply and it still doesn't work and mines only 4gb and i looked in it and i have no hard drive ? need help asap cause i dont wanna buy a new one !!! thanks
I have an original fat 360 but It won't turn on. What if the power brick is orange like it's supposed to be when you plug it in to the mains but it turns red when I hit the power button? The xbox comes on for a split second and the middle power light comes on and then turns off when is when the power brick turns red. I believe it's an internal problem because I tried 2 different good power bricks. Any help as to what to do or how to fix this? I was in the middle of modding my xbox with leds because it's out of warranty and it just died on me when I tried to turn it on. I've seen other people use the exact same led set and it worked fine on theirs. I don't get It. It was a Smart led storm V2 and I don't see how that could have killed my xbox. I was extremely careful with the installation.
I know this is an older video but im sure it still applies. My power brick is solid orange. When I hit the power button it beeps then beeps and shuts off a few seconds later. Any suggestions?
If you did tear your xbox apart you would find that all the usb ports are incased in a metal box. If you do take it apart you can access them better however. I would reccomend you fine a small flat head screw driver and just gently push them apart. WITH ALL CORDS UNPLUGGED. The only way the usbs dissable your xbox is if 2 of the prongs are touching eachother thearfore shorting it out. Hope this helps keep me updated and subscribe please.
I just bought a second hand xbox 360 slim it doesn't turn on (bought it very well knowing this) I tryied the power brick from my son's xbox still doesn't work but the same power brick works on his. So I ruled this out what else could be the issue?
Tried everything from youtubers video... didnt work for me.. brick is still on standby light... then I checked the plug to the console.. and one of the wire inside was bent! Dont know how it happened... but just straighten it again.. and bam! Xbox was on again! Just thought I'd share.. xD
What's the sound source for the beeps for the Touch buttons whatever it is it's coming from the left side of the Xbox I tried to locate it but I couldn't find anything you think you can figure that out and let me know what it is
None of my USB ports were bad. Mine worked yesterday but not today. I have the same problem as you. I don't know if it makes a difference but the block thing was red. I don't know if its good. Help
Hi, amm mine has a similar problem, the power brick is yellow or orange, i press the power button and it just beeps and the power brick stays the same. i tryed with a friends power brick but it still does the same.. So if you could help me i would really appreciate it.
My xbox 360, does not turn on. It will beep if I try to open the disc drive, and does'nt do anything if I touch the power button? Any solutions? Thanks
Oh also, i could smell something burnt from the AC adapter.. maybe something went wrong in there? there's also no air holes except for one which.. is reallyyyy tiny. I bought this new AC Adapter like a week ago because the other one broke and that one had 4 air holes.. so idk.
mine makes the turn on sound but won't actually turn on
i got the same issue, it lights up and makes the sound then automatically turns back off
I got the same problem
Welp I fixed that problem
@@4ded5 that was quick lol
@@yang139 lol didn't think I would of fixed it so quickly I guess wrong
i un plug mine and it stays orange
Joxter jr me to
Yeah
what if the system's brick is orange but still has this problem?
I have the same problem
10 years ago @@FartnoShorts
I was all like omg my xbox died but then i just found out that my power brick cable wasnt plugged in right #engineer
You are professional! From one "computer guy" to another I say this. You earned yourself my subscription. :)
Thank you so much I spent 15 minutes trying to turn it on! And now it is on :)
my xbox 360 slim doesnt work the power brick is still orange even after i unplug it from the 360 need help
Nate Lee same mine stay orange
Nate Lee same
Nate Lee same with mine. the battery light is orange. when it's unplugged the light is still orange even with no power going into the power brick.
have you found a solution??
The House Of Android check the front part where you plung things in..see if the medal pieces are straight up, just fixed mine
Ok I thought my slim wasn't gonna work again till I watch ur video an I got it working again cuz of ur knowledge of Xbox thanks a lot bro thanks for your help
Thanks for the advice about the power brick. I didn't actually have to replace mine, but nonetheless I would have never thought to turn my attention to that instead of just the system. I managed to get it going again after just disconnecting it for a while.
Problem solved. Thanks! Time for Far Cry 3.
Thanx you really helped me my power brick was not working i had the same problem what you had i was like i broke my xbox 360 but just searched about it and found your video i ordered a new power brick and my xbox runs very smooth thank you
My Xbox is having power troubles, and while the power brick fix did not help me, the disk tray tip did. I thought I was going to have to sell my Xbox with Battlefield 3 in it. Thanks so much for the help.
Yep, that was it! I was within a gnats whisker of buying a new XBox, when I saw your video clip. I decided to take the plunge and send off for a new power brick, and I figured that if it wasn't the problem, then I'd only wasted $40 or so (off ebay). Plugged it in, and it worked straight away! Thanks for the tip!
I hope this works for me, I'm having tod same problem, orange light. On power Brock Bit not coming on So hopfully this works when my new power Brick comes in
Nice to listen to someone who knows stuff about this and I think he said he worked for Microsoft somthing like that
this was a great to me because I sent my xbox over to my little brothers and it wasn't working and I took good care of my xbox it never scratch but wouldn't turn. I told them to get a new power brick and ill wait for them call me back if It works. thank you very much for your help :)
my Xbox 360 slim's power brick is orange but the power button on the Xbox 360 doesn't work. any ways to fix?
Nicholas Wee i have the same thing and i can’t find any kind of fix for it
I also tried someone else their power thing. Still not working
i unplugged my play and charges and it worked!
me too
i fucking love you
Thank you so much, all your techniques did not work but, I still appreciate all you showed me.
Thank you for this video I was getting so pissed off thinking I just got this xbox and I'm going to have to buy a new one but nope!! Earned a sub
thx work the usb was the problem your the best subscribed and liked
Thank you sooooo much! You're a life saver! :)
Thanks for the help. All I had to do was tap my hard drive and to started working straight away. (Y) Thanks again.
Wat do u mean by tap the hard drive??....
That's what you said to do in your vid
Hey man thank you I didn't need to by a new one I saw it was on standby so I unplug it and it worked
My power brick is orange but my xbox won't turn on. it makes the noise as if it was on but nothing happens. I've unplugged it and even switched it to another outlet but still the same problem.
same
Did you ever figure it out? Mine does the same
I have the same problem too, I hope there's an easy solution to this TT^TT
OMG man thanks this video helped me so much I thought I was gonna have to buy a new Xbox
Your my hero! Thanks so much for posting the vid.
Omg I did the hard drive thing and it worked thank you so much
Had the same issue xbox froze after 2-3 mins i unplugged it then replugged it back in difference was the power brick was shining red so i unplugged it waited for the light to shut off then i plugged it back in and it works fine now thanks for the help
Omg thank you so much! Was wiring some led strips and the back of the led board arced off the frame! Couldn't figure it out til you mentioned the brick( which was red). Unplugged it and let the light die, plugged it back in and now its working!
good tip your right they do overheat sometimes and simply unplugging for awhile goes a long way thank you..
thanks your my hero from today!
Thank you it workedd !! i unplugged my Usb cord and bam
This heloed me out. Thanks. Just h had to ket the oower brick reset itself
Omg thank youuu, I need a new power brick
Yes i have see this before and it is a relatively easy fix. If you watch my 3 videos on my channel in a row it shows you how to disassemble your xbox. If you have an xbox 360 SLIM! it is probably your internal memory chip. On my 3 video at 3:08 i show me removing that chip i don't specify on what it is in the video but i do remove it and re-install this chip. What you need after you get to that chip is simply remove it and assemble your xbox partially reinstall your fan and your hard drive.
Thank you my xbox now works again :)
This happened to me just now, i was playing perfectly fine about 4 hours ago. Turned off my Xbox because didn't want to play anymore. few hours later i tried to start it and i heard it was booting up and stuff when suddently the AC Adapter went silent, the power button on my xbox was still screen, tried to turn off the console but couldn't. i could just hear the BEEP sound. It's weird because it worked sooo perfect 4 hours ago.
O ok awesome try put your power brick in a well ventilated area
Thanks for the info man. Keep posting them. :)
My son's power brick was red with no power to xbox. Unpluged it from the power strip and back into a main receptical on wall. Power brick is now orange and xbox powers up and works fine.
Hey guys I need help with my xbox 360 slim, the power brick is orange when I plug it into the outlet but whenever I turn on my console, the console just beeps and the lights turn green but only for a half of a second, what do i do?
I had this problem where my power brick was fine but buttons still wouldn't respond. Saw your video, checked my USB and nothing was bent but I pressed down on the USB plate around the ports on all sides a bit and it powered right on. So if anyone else is having that problem where their 360 powers itself off and wont turn back on. Try that
Thanks SOO much i have liked and will be showing my friends your channel!
thanks man really helpful, worked for me
You saved Master Chief's life! I was like no Halo 4!!!
Could you help me? My Xbox live slim won't turn on. It will make the beeping noise but it won't turn on. Also my power box won't come of stand by mode it just seems to be frozen like not enough electricity will go through to power it. Do I need a new power box?
Same as me
mohammad nor Joey just give it some time. Mine fixed its self I guess l just gamed on it to much
thank you so much your video part 2 helped me
You saved my life thanks man
Yes that is what this whole video is about follow the steps in video and then telll if it dosnt fix it. SUBSCRIBE
had this issue and researched it by videos, xbox support, etc. etc. checked the end of the chord and the prongs were bent at an odd angle it still plugged in but gave me no connectivity. straightened these out with a pair of needle nose pliars and it is working perfectly! please check this before purchasing a new chord.
Omg thank you that happened to me
my Xbox doesn't even do anything. I bought a new power brick because my old one had a red light and I tried it and still didn't work so I opened my xbox cleaned it out and it still does t turn on... help please
okay. the light is orange and it turns green when I turn it on but after a few minutes it shuts off. I unplugged it from my xbox and it was orange. I don't think I'm going to be able to get a new power box so can I do anything to fix it? sometimes it turns on by itself if that helps with anything
hi, I just recently had this issue where my Xbox 360's controller sync button will not work, so I tore it down to see what is the issue and when I put it back together my power brick shows an orange light and xbox is not switching on.
Legit watched everything and Xbox will still not turn on....
Hey one more problem with Xbox Slims. If you recently took it apart and it doesn't turn on, try turning it on with a Xbox 360 controller. If it did turn on. It is possible during the disassembly process that the ribbon cable that runs from the power button became unplugged. Simple fix, yes but man it took me forever to figure it out especially when I was trying to trouble shoot a possible power supply problem.
Yes sounds like a diagnosis. Except you still have a dead mother board so try all this. Check all usb ports very well make sure they dont touch as i mentioned. also check your ribbon cable in front where the face plate is. because if you have had your xbox apart you can damage this very easily. Check out my other videos on my page i think they will help there is 3.
thats was almost the same problem but different lol. But its a good fix thank you
Thank you it was the usb that was the problem thank you. Thumbs up and subscribe.
Didn't work for me, the USBs are intact, my power supply stays orange, my power supply is plugged up to my system. I've had my system for a month, I'm the second owner and it was working just fine last night. Had to reflow the HANA, checked it out today, wouldn't turn on at all.
Same exact thing with me :( second owner and everything only about a month in a half two months and it already fucking broke and I just bought another god damn power brick too
Gabriel, what kind of 360 do you have? Is it a Xenon, Falcon, or a Jasper (Elite)? The reason for mine to not turn on period was due to my HANA chip, had to reflow it every other day......finally, it got tired of it and just stopped working.
thanx bro im really happy now thanx once again
I have a similar problem where I turn on my Xbox 360 it turns off by it self and it keeps doing it, I tried fixing it but nothing anyone have the same problems and you found a solution plz reply.
well that sounds like normal to me have you had it apart recently and then it stopped working??
Life saver! Thanks!
Im glad i could help.
Omg thanks so much! Its somthing I'm going to try!
Keeping in mind if you do not re-install your hard drive correctly with all the connectors connected in there proper positions and your wifi chip isnt removed your xbox will try to connect to xbox live and they will band you!!!! So to avoid this make sure you remove your wifi chip before you try to turn your xbox on. Now simply re-install hard drive fan and just connect ribon cable on the front so you can use your buttons then try to turn it on and see if your home screen loads
My xbox 360 s power brick has a orange light but I think there is something wrong inside of it because it makes a beep but doesn't turn on and my game is in there but I won't come out.
If you haven't fixed it yet,Grab a toothpick or something small and on the side of the disk drive on the grill is a yellow part with a hole that will manually open the disk tray and get the game out
Alright everybody!!! I commented the other day about a yellow power brick source issue where my system would turn off and on on its own. So the issue is NOT the POWER SOURCE BAR!!! It's the sensor that communicates with the actual on and off sensor and ribbon. Be very careful when taking the ace plate off with the ribbon and replace the actual part between the touch pad button and hardware for the button. Clean it with a duster, of that does not work it cost me 15$ for the part.
Thanks man this really helped
Hey just Killak I had this problem try unplugging the xbox plug it into another socket then (just the power brick and the xbox no tv) plug it back into the original socket it worked for me hope it works for u :)
You saved my xbox ❤️
If your power pack is fine just that your Xbox isn't turning on try plugging it into a mains socket not a extension lead which worked for me
My 360 won't open tray or light up. It makes sound when u touch the buttons but the fan and everything won't run... Any help?
Yes thank you I fucking love u bro.
Pro tip, the lining beside the usb port could also be not were its supposed to be. easy no dismantle fix. just use your finger to put it on the surface and then your xbox should work again.Your welcome!!!
My Xbox slim just recently(20 minutes ago) and has the same issue but makes the bing sound when you touch the power button.
Did you take the system apart recently???
I have an issue with my xbox 360 s, PLEASE HELP. The problem is, my console "I think it's working fine" the power button is green on the console. But, it's not displaying anything in the tv it just says that there's no wire connected or something. The hdmi cable is fine every wires in the xbox is completely fine but it does not display the xbox 360 logo thingy on the screen, it just says that no signals or wires connected to the tv. I checked the wires, the tv is fine there's no prob with tv. The last thing happened was, I was playing a game then the game just went distorted and stuff, I turned it off and on again and the next thing that happened is the power button on console is green but the it does not show anything on the tv
I want to ask a question ,my Xbox 360 turns on ,but it doesn't start,it powers on but it no loading screen or nothing !why?!
mine does the exact same thing
Try changing the av or hdmi cable
Well it seems like you have a history with the power bricks. So that would be my first guess. Try repluging in your old power brick that turned red see if you get anything out of your system. If the powerbrick has absoulutly no light on it even when it is unplugged from the system there is something going on with that powerbrick. Try maybe a different outlet plug in your house also. you could have had a powerserge witch is what that power prick is for is to protect your system.
i bought a xbox 360 slim, i have only had it for about 5 months and i was playing it and it randomly shutoff and never turned on again!!!! so i bought a new power supply and it still doesn't work and mines only 4gb and i looked in it and i have no hard drive ?
need help asap cause i dont wanna buy a new one !!! thanks
+Jordan Trivett my did the same last week I feel bruh I was playin gta 5
My almost does the same thing but my xbox turns on but you can't connect a remote and it won't show up on the tv. How would I fix a problem like that?
I have an original fat 360 but It won't turn on. What if the power brick is orange like it's supposed to be when you plug it in to the mains but it turns red when I hit the power button? The xbox comes on for a split second and the middle power light comes on and then turns off when is when the power brick turns red. I believe it's an internal problem because I tried 2 different good power bricks. Any help as to what to do or how to fix this? I was in the middle of modding my xbox with leds because it's out of warranty and it just died on me when I tried to turn it on. I've seen other people use the exact same led set and it worked fine on theirs. I don't get It. It was a Smart led storm V2 and I don't see how that could have killed my xbox. I was extremely careful with the installation.
thank u your the best
thx dude now id found out whats the problem
I know this is an older video but im sure it still applies. My power brick is solid orange. When I hit the power button it beeps then beeps and shuts off a few seconds later. Any suggestions?
If you did tear your xbox apart you would find that all the usb ports are incased in a metal box. If you do take it apart you can access them better however. I would reccomend you fine a small flat head screw driver and just gently push them apart. WITH ALL CORDS UNPLUGGED. The only way the usbs dissable your xbox is if 2 of the prongs are touching eachother thearfore shorting it out. Hope this helps keep me updated and subscribe please.
I just bought a second hand xbox 360 slim it doesn't turn on (bought it very well knowing this) I tryied the power brick from my son's xbox still doesn't work but the same power brick works on his. So I ruled this out what else could be the issue?
Tried everything from youtubers video... didnt work for me.. brick is still on standby light... then I checked the plug to the console.. and one of the wire inside was bent! Dont know how it happened... but just straighten it again.. and bam! Xbox was on again! Just thought I'd share.. xD
lol
This helped me very much
thanks you are awesome! I thought I lost GTA 5
Thanks so much i got my disk out!!!!
hmm thats interesting i havent heard that so far thank you. Do you no what sensor it was called??
What's the sound source for the beeps for the Touch buttons whatever it is it's coming from the left side of the Xbox I tried to locate it but I couldn't find anything you think you can figure that out and let me know what it is
Mine will turn on but wont show up on the tv screen. The fan is constantly running as well. Any help?
None of my USB ports were bad. Mine worked yesterday but not today. I have the same problem as you. I don't know if it makes a difference but the block thing was red. I don't know if its good. Help
Hi, amm mine has a similar problem, the power brick is yellow or orange, i press the power button and it just beeps and the power brick stays the same. i tryed with a friends power brick but it still does the same..
So if you could help me i would really appreciate it.
Right now am having this problem the power card is orange then turn red when turn off and the xbox still wont turn on
who realized that his voice is exactly like doctors voice in Half-Life ????
My xbox 360, does not turn on. It will beep if I try to open the disc drive, and does'nt do anything if I touch the power button? Any solutions? Thanks
Oh also, i could smell something burnt from the AC adapter.. maybe something went wrong in there? there's also no air holes except for one which.. is reallyyyy tiny. I bought this new AC Adapter like a week ago because the other one broke and that one had 4 air holes.. so idk.