hey sir, can you help me please ?, at 14:18, when I try to do as you said, somehow the line after filled didn't move to the top center of the circle like your, but instead get deviation into the right side, next to the top center of circle here ?
@@CADCAMTutorials it didn't work, I try it on the quadrant of circle, and try turn ortho on or off, but it still not work (need to sleep now, I will continue in the morning)
@@CADCAMTutorials thank, but it still not work, I think you don't need to help me in this part anymore, I will try fix this later (don't want to bother you much)
+pedram farbiz Limits command is explained in detail in following videos: ua-cam.com/video/ojuz0rzt67M/v-deo.html ua-cam.com/video/4GbfgPGtzFs/v-deo.html
sir i have problem with regards to mesh the final smoothnessin my solid work with 3d modeling the edge of my drawing will become thier is tooth. pls help me to resolve my problem
i used pollar array to place the 3 ciricles correctly since two of the points were known , and then i used triple tan command to place the outer circle
Why did you measure the big bottom circle of 100?
Because I forgot to put that dimension in the exercise pdf.
@@CADCAMTutorialsgood! Was confused asl
thanks i bet my teacher will be impressed by me for this new move i learn about AutoCad nice work
You are welcome and all the best
Really ur video lectures are too easy to understand and helpful!!!
Thank u 😊❣️
Thank you soo much sir. Your lucture is very clear. Thank u once again.
You're welcome
Thank you so much sir very helpful thank u so much I am learning AutoCAD from your channel.Thank u sir.
Thanks sir..😍🙏🏻🥰
You're welcome 😊
Teaching method is very nice sir
Thanks you so much, only you need to show how to add dimensions in every diagram that would be great
thnks soo much you re wonderful teacher
You are welcome
Thank's very much sur,,, thank's a lot
You're welcome
Thank you !
You're welcome!
Your videos are very informative . Thank you very much sir
it would be better if you would attach the exercises file (pdf/jpg)
شكرا لك سامحني لقد استخدم احد رسماتك😔❤️🔥❤️🔥.
very useful video. your teaching skill is really amazing.
Thanks very usefull this tutorial
❤️❤️
u r the best
Nice
Thanks
14:58 why tantan radius is measure at 100 radius. thanks!
Thank you
tq tq tq tq ........so much😙😙
Thank you sooo much.
the best!!!!!!!!
Your way of teaching is Awesome...
Hope I can learn quikly...
Plz tell me how to get auto cad 2014 on my PC?
What would be the cost...?
Thank you.
explained very well
👍👍👍👍
Thank u so much
Sir
Thank uuu very much...
Thank you very much sir
You are welcome
Nice explanation. Thank you!
Your voice is like a psychological in Tamil channel
thanks alot
Hello,
@14:56 how do you find the radius of 100 for the circle that is not given please ?
Thank you great videos btw !
It was there in the original drawing. I forgot to put that dimension in this exercise.
Thnk you sir..
You are welcome
great
Thank you
What is purpose of limits... Will they affect the final output??.... Is it mandatory to use limits???
+manjesh.s gowda It is required for beginners. If you can manage without it. It will not create any problem.
hey sir, can you help me please ?, at 14:18, when I try to do as you said, somehow the line after filled didn't move to the top center of the circle like your, but instead get deviation into the right side, next to the top center of circle here ?
Creat line from quadrant of circle and keep ortho ON.
@@CADCAMTutorials it didn't work, I try it on the quadrant of circle, and try turn ortho on or off, but it still not work
(need to sleep now, I will continue in the morning)
On the other end, don't apply any object snap and just click in empty space.
@@CADCAMTutorials thank, but it still not work, I think you don't need to help me in this part anymore, I will try fix this later (don't want to bother you much)
Why did you decide to use radius of "100" at 15:00??? I'm racking my tiny brain here!
It was given in the original drawing. I forgot to put in this pdf file.
Thx
You are welcome
Please answer my question
You can use arc and fillet instead of using circle for giving curves why ?
Arc is tough to use. You can use fillet for some locations. For some locations circle is must.
@@CADCAMTutorials thanks
how can I pad the exercise above..
15:24 I just wanna ask why 100 instead of 110 as label below?
110 is the gap between circles. I forgot to show radius of large arc. It is 100.
oh i see thank you sir
Where all this diagram will get in pdf form ??
can you please provide PDF Exercise notes.
can you explain how did you ended up 100 radius sir??
+edbert cabras use tan tan radius and give radius as 100. You can view it in video.
what is the purpose of limts can u say
Sir , how to draw ft or mtr measurements? How to convert?? Pls sir
+Rakesh P.V Refer this video for Feet inches ua-cam.com/video/hh_FoUdXLpQ/v-deo.html
sir can you provide us the exercise pdfs??
hi,i cant understand what is "limits" exactly doing while drawing.
can u explain it for me?
+pedram farbiz Limits command is explained in detail in following videos:
ua-cam.com/video/ojuz0rzt67M/v-deo.html
ua-cam.com/video/4GbfgPGtzFs/v-deo.html
sir i have problem with regards to mesh the final smoothnessin my solid work with 3d modeling the edge of my drawing will become thier is tooth. pls help me to resolve my problem
+nikkojenhoneybabes1970 Add Crease to the edges
How did you you given 100 radius tan tan radius ??
They forgot to give dimensions.
@@CADCAMTutorials dimensions diagram keep right side & draw in left side bro., We can understand easily... Good work
pdf of exercise is viable
Sir How you know that the circle has a radius of 100?
+Ng WeiWuen Radius is given in the drawing.
the radius isn't given. did you randomly choose it or not?
I thought so too. The dimension is evidently missing from the drawing
i used pollar array to place the 3 ciricles correctly since two of the points were known , and then i used triple tan command to place the outer circle
what is the next step after this video ?
Here is the complete playlist: AutoCAD 2014 Tutorials for Beginners Complete: ua-cam.com/play/PLrOFa8sDv6jeEEG7xiCiwu8PZVRm-DP9C.html
@@CADCAMTutorials thank you ,do you have maybe some videos in advance mode or mechanical enginering something like that maybe?
AutoCAD Difficult Complicated Drawing for Mechanical Engineering | Reading Engineering Drawing
m.ua-cam.com/video/fzdlP4fbn1Q/v-deo.html
Hello sir please tell me object name.
how can i convert my line into dotted??
+Tushar Gusain Watch this video for hidden line ua-cam.com/video/MJI9uAbheEY/v-deo.html
Sir how to upper limits 200
+Balabhaskar Reddy Work out the maximum height or length of the object and take more than that.
thanks alot