Thank you so much for these videos...I have learnt a lot of AutoCAD from this your videos... please make video on FreeCAD also... thank you once again..
should there be double circle for diameter 40mm ? i thought so because there is a chamfer of 2mm for the circle of 70mm and there are two circles there
10:52 we can define layer for hatching line also, by properties in hatching environment. किसी command के enviroment में hold shift+ right click you will get different constraints 16:46 Shift coordinate axis to a particular point by UCSICON or select UCS 22:13 take cursor to that point to avoid unnecessary snap. 25:41 If there is a single line type in various places and we want to change a single line or 2 or 3 lines out of those various lines of single type.
Good evening sir I am a new user for you.. Sir one small request.How to install this software for pc. Sir I have a no idea. So please share this link sir.. Thank you sir
@@CADCAMTutorials sir thanks for your reply but even if dynamic input is on while i'm clicking tab it ends the line command in direction where cursor is placed. i'm unable to draw lines with angle.
I delete the entire draw and tried again and it worked. This time I only use one layer for everything. And I did exactly e.g. the mirror *and* then extend for the angle-line instead of dragging the angle line to the circle diameter. This time it worked. But I would like to understand why the first time I could not fillet successfully.
@@CADCAMTutorials thank you, if possible mention for all your previous videos and upcoming(without fail). I learnt a lot from your channel. Keep going👍
Hi is there anyway I can speak to you. Can you provide your email Id. You have been of immense help and I would like to thank you for that. I just wanted to speak to you. PLease let me know if you are up for that. thanks
You are amazing you make learning so easy and fun by that I mean no stress thank you so much.
Thank you, It was explained extremely well compare to my teacher in class with more than 20 years experience.
Thank you friend for showing teaching..☺️
My pleasure 😊
I'm learning so much from your videos! Thank you!!
I'm so glad!
Thank you so much for these videos...I have learnt a lot of AutoCAD from this your videos... please make video on FreeCAD also... thank you once again..
thank you so much I learned a lot from this video, thank you sir
Love from Bangladesh 💓💓💓
❤️
Sir I am facing a problem that is When i am creating a PDF the hatch pattern is not showing in the PDF.
Please help me
Add some practice drawing pdf in description Which we can download and practice drawing through that please
kishore creations Yess also I was thinking same to u 👌👌
In the third drawing.. could you please tell me how you knew that the Fillet is 4 inches?
Thank you so much sir
Please sir, please where can we get these examples you're using may be in pdf or other format?
Thank you
My sample output shows something different than yours and I entered the exact same units you showed in the video, what can I do to fix this
should there be double circle for diameter 40mm ? i thought so because there is a chamfer of 2mm for the circle of 70mm and there are two circles there
Thank you very much Sir for these excellent tutorials.
very good!
Thank you 😊
sir,you are fantastic.
10:52 we can define layer for hatching line also, by properties in hatching environment.
किसी command के enviroment में hold shift+ right click you will get different constraints
16:46 Shift coordinate axis to a particular point by UCSICON or select UCS
22:13 take cursor to that point to avoid unnecessary snap.
25:41 If there is a single line type in various places and we want to change a single line or 2 or 3 lines out of those various lines of single type.
how to find the centre of the circle by the cursor? how to generate that cursor?
Thank you It is really useful for me!!!!
Bro...i small doubt....draw pannurathu munnadi adcadiso.dt nu select pannurom laa athukku yethu yethu use pananum panna koodathu sollungaa broo
Thank you Sir.
Hello, How could I dimension a chamfer like you? 3:13
the circle quadrants dont highlight for me even tought i have tracking on, anyone know how to fix?
Check that quadrant object snap is ON.
💚💚💚💚
Sir in 4:20 why my quadranpoint not show in my autocad ?
Thx man👍
❤❤❤
while i am selecting image it is selecting in irregular way not like you are showing rectangular way. what to do sir?
You have to click and release. Don't keep it pressed.
Sir,Please make a video about GD&T
sir pls could you tell the drawing name pls in case someone tell us to draw any of them then we will know whats are they talking about
great man
Good evening sir I am a new user for you.. Sir one small request.How to install this software for pc. Sir I have a no idea. So please share this link sir..
Thank you sir
How to show dimension of drawing.
ua-cam.com/video/ucFma7SgZ70/v-deo.html
ua-cam.com/video/EQdGiO5Xt9U/v-deo.html
👍
can u add some practise drawings in the description
Can i get help for downloaded autocad2020
For instalation
sir for me clicking tab don't take to the angle it is ending the line command. where i am making mistake can you please clear it sir.
ua-cam.com/video/SPmNP8q47JM/v-deo.html
@@CADCAMTutorials sir thanks for your reply but even if dynamic input is on while i'm clicking tab it ends the line command in direction where cursor is placed. i'm unable to draw lines with angle.
Is it showing the length and angle of line?
@@CADCAMTutorials yes sir it's visible. when i specified length and press tab it ends the line command not taking angle.
cannot fillet between those two entities. 19:52. I have tried explode option already.
I delete the entire draw and tried again and it worked. This time I only use one layer for everything. And I did exactly e.g. the mirror *and* then extend for the angle-line instead of dragging the angle line to the circle diameter. This time it worked. But I would like to understand why the first time I could not fillet successfully.
It's not showing centre on my system
Can any one explain me why he draws the right object by following the circle ?
In that way you can avoid calculation and typing values manually. It speeds the process.
Cad cam tutorials mention the NAME of components of drawings. It would be help what we are designing actually.
1. Bush
2. Spoon
3. Connecting Rod
@@CADCAMTutorials thank you, if possible mention for all your previous videos and upcoming(without fail). I learnt a lot from your channel. Keep going👍
How to come to 70 -15
Hi is there anyway I can speak to you. Can you provide your email Id. You have been of immense help and I would like to thank you for that. I just wanted to speak to you. PLease let me know if you are up for that.
thanks
How to know which part we should do first😅
Normally object can be drawn from center. You have to take judgement as per available dimensions.
CAD CAM Tutorials Thanks alot Sir Apreciated ur help 👌