Kongsberg Engine Simulator Cold Ship to Main Engine (purifier not included)
Вставка
- Опубліковано 3 гру 2020
- Hello viewers and subscribers this video is made for the future and aspiring marine engineers. This video is my on knowledge about the simulator if you have suggestions on how to operate the system kindly comment on the comment section below. This will help me to correct my mistakes and to have some knowledge.
kindly like share and subscribe to my YT channel and click the notification bell icon to be updated on my next videos.
Good idea, for the new Students, even on the new ratings and Engineer full of knowledge,,
what a brilliant young man!
Solid bets!
Salamat pre laking tulong yang video mo..GOD BLESS
Salamat po may isa pa po akong video ng coldship mas kumpleto po yun Godbless din po
@@jovenz08 Baka pwedi Po makahingi ng copy sa Video Po para sa Anak Marine Engineering rin Ang Course Niya,,
Paki pm po ako sir sa fb acc ko po joven mar l. Bete
Sir correct me if I'm wrong but in the case of admitting steam to the bunker tanks ang turo kasi ng 3rd eng namin noon na wag mo ibigla sa steam pressure ang piping to avoid water hammer. Gradually increase it by 10 up to 50. Salamat din sa vlog mo about kongberg simulator
Wow thank you po sir di ko pa po alam yan kasi di pa po ako graduate actually for recog na ako and attending basic training. Thank you for the info sir !
yey
Hahahah namisss kuto bets hah
Nood ka lng sa mga vid haha salamat
esubscribe kita lods kasi u deserved it.daming viewers lods walang subscriber.
Salamat po sir Godbless 🥰
Dapat nilipat mo muna sa bridge bago ka mag pa andar hehe
Galing boss. Baka pwd penge Ng PDF guidelines assessment Kasi namin. Sana mapansin mo boss. SALAMAT
Paki pm ako sa fb joven mar l bete
Oka Na po boss
Hello my friend ... in my cold ship initial condition i can´t voltage control on my diesel generation!!! i do on my emergency generation without any problem , but the other i cant do the same.can you help ? many thanks ;)
Set the command to the bridge sir
Sir saan kita ma pm , may system directory ako dito sa practical namen sana meron kang vlog nito
Pwede po paturo sir ng , initial condition ng start air system , yung wala pang hangin ang tanke, yung 0 bars pa po
Pm mo ko sa fb sir joven mar l bete name
San nakakabili ng simulator na yan? Para mapagaralan? Hindi mo po nailagay sa description sa video, Thanks po
Sir, ask ko lang po, sadya po bang namamatay yung DG2 after mo sa Freshwater Hydrophore?
No sir di po dapat mamatay si dg2 nag synchronize na po ba kayo ng dalawang generators? Kindly check my latest coldship vid sir salamat po
@@jovenz08 sge sir. check ko po other vide mo sir.
hindi sir, walang connect yan sa hydrophore kung bakit namamatay, pwede namamatay yan if ever na kaya naman ng isang generator ang load, because also it is on remote mode yung mga generator natin.
Good day sir! Ask ko lang po kung bakit namamatay yung DG2 ko pagka po nag ooperate na po sa boiler same naman po ginagawa ko sa vid nyo.. Salamat po sa sagot
Check diesel , check cooling system, naka synchronize na ba sya sa dg1? , naka remote and automatic with prior 1 and 2 ba? Try again po trial and error lng po yan practice lng po ng practice 💯
Check mo other coldship vid ko 😁
Okay po sir thanks po
my friend im having a problem when i put the handle more than 35 i have torque limit in the main engine any idea what is going on? and i put it to stop and try again and same story any idea4
My friend u must wait for the actual rpm reach before increasing ur rpm
@@jovenz08 they just dont even if wait half hour the limit of torque doesent go
My friend watch my video carefully and try it and practice everyday
i solve it thank you any way , was because i had the water inyection module in the fuel system on, maybe i have to play with the setting of that but as soon i put it off the rpm of the engine start going up more than 35
Good job my friend
Mas madame pa ata views mo kesa kay ram bets ah
Madami naman sya subscribers hahahaha
@@jovenz08 oks lang yan bago ka palang naman e keep it up
Sir asko lang po kung pwede humingi ng procedure ng ginawa mo oh PDF para po mas makita po namin thank you
Paki pm lng po ako sa fb sir nasa channel nameko po
Bro., Saan mo na download yung Kongsberg MC90 V mo?. any link to share for free downlaod?. Thanks.
drive.google.com/file/d/1F1oqixBf7BjAwji9yIdrSj4hlZCm_2Ma/view
Thankyou for watching sir kindly like and subscribe to my YT channel
@@jovenz08 Thanks for the link Sir., Hope you can upload a video for starting up the Boiler and the whole systems., God bless Sir., and Have a safe sailing if you're onboard the ship.,
Copy sir i can do that. Graduating student palang po ako from Dr. Carlos S. Lanting College
Penge nang pdf bets pra pampractice ko. Thanks advance
Paki pm po ko sa fb salamat
Sir ano po fb mo?
Joven mar l bete pa search nlng po
Pano po maackknowledge yung 3 ? Laptop lang kasi ang gamit ko?
Left click nyo ung 3 tatlo po icliclick
Hello po baka po may pdf po kayo ng pag kaka sunod sunod? Salamat po sana mapansin niyo po ako
Sinend ko na po sayo sir
Pwede din po ba pahingi ng pdf file sir
Sir ma download pa ang ganyan na apps?
Search nyo po sa youtube download kongsberg simulator 1st suggestion may link po dun
Thank you, but where you download this
Kindly search download kongsberg simulator on youtube 🤟😁
@@jovenz08 yes i get it from there, but i cant activate the audio, how you do that
Just press f5 sir :)
@@jovenz08 still doesnt sound my friend, only the alarm sound
Press f5 then click the sound button on the setting there is a button for sound just look entire settings
ser pdy makahingi link? panu e download?
Pa check po sa reply ko kay mr mark villanueva thanks po
pro please link dowload and setting . thankssssssssssssssssssssssss
i want reset app?
San po madownload Yan Ganyan?
Marami po mga download link sa youtube sir. Itong sa akin kasi galing to sa intructor ko salamat po
Hindi mo naman na fullahead may mali kang nagawa sir before you post a video about tutorial on simulator make sure na alam mo hanggang dulo ng process. Always think about it. SIR!!
Hello sir meron ako bagong video na coldship baka masagot po ang mga nasabi nyo sir Godbless 😉
Anyways this video purpose is to give ideas for the bsme students to know on how to operate the machinery. What i always said on my captions that if i have a wrong process kindly comment and help me share your knowledge as well. Let us help each other if i do have mistake kindly tell me or teach me ?