I just got gifted an old singer 31k19!! The one with the kick foot... got it from the original owners son, with the table, sl2 lamp, bobbin winder and original clutchless semi-industrial 180w singer motor that sits under the table and has a brake on it... It will be used and preserved just as is, no modern ad ons.
I was able to confirm that my machine is a 31-20 by comparing it to the info on this video. The plate for the model number is missing. The serial number confirms where and when it was made. It is a fantastic machine.
Hi, there should be a spring with a small screw on the side of the bobbin case that you can tighten up to get more tension. Also make sure your bobbin is wound correctly and not loose as that will affect it also.
I've just acquired a vintage Singer. The model plate is gone and the serial number is hard to read. I'm thinking it's a 95, but it could also be a 31 from the looks of it. It's mounted on a free motion quilting frame and doesn't have a feed dogs or stitch length regulator (not necessary for free motion). What has surprised me the most is how QUIET these machines are!
I’ve seen and had machines converted to free motion machines. You can just add the feed dogs back to sew regular again. 95s are just shorter 31s. If you measure it you’ll know which one you have.
Thanks. It just pops in from the bottom on the left side. Very similar to most sewing machines from that era, both industrial and domestic. Any specific thing you had a question with?
@@raymercado3650 For needles go with the bigger size to handle the thread. I use a size 20 or 22 with my denim and I think that should work for your leather. I think they go up to 24.
@@derekdoeschannel i have got other machines that do reverse but would be nice walking foot looks kinda simple but yu would have to cut into the body to add the extra parts
@@derekdoeschannel ive looked an there like couple grand from looking at the parts on the singer 31k 47 kick foot similar to how to feed dogs work my pal is a mechanic hope in he will help me figure it out
@@derekdoeschannel Уважаемый друг Я в интернете нашел другую информацию,вы написали,что в Германии сделана швейная машина А я нашел в источниках,что она сделана в Elizabeth , New Jersey USA
I just got gifted an old singer 31k19!! The one with the kick foot... got it from the original owners son, with the table, sl2 lamp, bobbin winder and original clutchless semi-industrial 180w singer motor that sits under the table and has a brake on it...
It will be used and preserved just as is, no modern ad ons.
Fantastic! Keeping it original is the way to go. Have fun with it!
I was able to confirm that my machine is a 31-20 by comparing it to the info on this video. The plate for the model number is missing. The serial number confirms where and when it was made. It is a fantastic machine.
I love mine. Glad you have it!
Hi I have a old 31-20 can you tell me how I can tighten the bobbin stitch it’s loopy not able to tighten it thanks
Hi, there should be a spring with a small screw on the side of the bobbin case that you can tighten up to get more tension. Also make sure your bobbin is wound correctly and not loose as that will affect it also.
@@derekdoeschannel Thankyou I’ll give it a try
I've just acquired a vintage Singer. The model plate is gone and the serial number is hard to read. I'm thinking it's a 95, but it could also be a 31 from the looks of it. It's mounted on a free motion quilting frame and doesn't have a feed dogs or stitch length regulator (not necessary for free motion). What has surprised me the most is how QUIET these machines are!
I’ve seen and had machines converted to free motion machines. You can just add the feed dogs back to sew regular again. 95s are just shorter 31s. If you measure it you’ll know which one you have.
@@derekdoeschannel I assume the difference in size is in the harp space? Mine is 10.5".
@@pamwalton3411 You have a 31 series.
@@derekdoeschannel Thank you so much!
You didn’t show how the bobbin works? on 31-20, but do enjoy your vintage sewing machine videos keep it up!
Thx
Thanks. It just pops in from the bottom on the left side. Very similar to most sewing machines from that era, both industrial and domestic. Any specific thing you had a question with?
I have the 31-17 I use it on all things I sew very good machine
The 31-17 is a very nice machine. Originally for leather too so it should handle anything you throw at it. Thanks for watching.
Hi Derek, where can I get the servo motor for the machine? Any recommendations for needles for light leather? Thanks Ray
@@raymercado3650 Amazon carry’s quite a few. This is a good one or look at what else they carry. amzn.to/3Q7csPp
@@raymercado3650 For needles go with the bigger size to handle the thread. I use a size 20 or 22 with my denim and I think that should work for your leather. I think they go up to 24.
@@derekdoeschannel Is there a particular Part number for the needles used for this machine? You recommend using of NOS needles? Thanks
i found i singer 31k 47 with a kick foot could you add reverse or could a add the kick foot parts to a different singer like a 319k
I don't think you can easily add reverse. Best to just get another machine with it if you need it.
@@derekdoeschannel i have got other machines that do reverse but would be nice walking foot looks kinda simple but yu would have to cut into the body to add the extra parts
@@rndea100 I've never done it, but I'm sure it can be done. Probably cheaper to find a Consew or Juki with it already there.
@@derekdoeschannel ive looked an there like couple grand from looking at the parts on the singer 31k 47 kick foot similar to how to feed dogs work my pal is a mechanic hope in he will help me figure it out
А у меня на singer номер 31 D 70 и на каждой детали написано simanco
Nice! The "D" means it's made in Pre-War Germany.
@@derekdoeschannel огромное спасибо,за то что рассказали,о этой машине,мне повезло,она очень тихо работает
@@derekdoeschannel
Уважаемый друг
Я в интернете нашел другую информацию,вы написали,что в Германии сделана швейная машина
А я нашел в источниках,что она сделана в
Elizabeth , New Jersey USA
If your number is a 31D70 the D means Germany (pre war).
@@derekdoeschannel а вы где территориально находитесь?
Hey Derek, what is the difference between the 31-20 and the 31-15 is? There's one for sale near me quite reasonable.
Hi, the main difference is the 20 has a slightly larger bobbin and a wee bit more clearance under the foot. Both excellent machines to own.
Thanks mate!@@derekdoeschannel
Hey Derek, how thick can these 31k32 sew?
I don't know really. I'd guess 1/2 or 5/8" or so?