Beginner Guide Part 2 // How To Build Budget Cinematic FPV Drone 2020
Вставка
- Опубліковано 24 лют 2020
- Emax ECO 2207 2400kv: bit.ly/2pwsXdk
iFlight SL5: bit.ly/2kBCNZz
RushFPV Tiny Tank: bit.ly/38KFhbo
Rush Antenna: bit.ly/2SQ0ETp
Diatone F60 ESC: bit.ly/2S1tnEw
Diatone F405 DJI: bit.ly/32jWPZQ
Racer Nano: bit.ly/2L6Pzd8
XT60: bit.ly/2T6oQQl
Xm+ Receiver: bit.ly/2Kamywh
-- 3d Printed Parts
www.thingiverse.com/thing:316...
--RC Controller
90 USD (I Use this everyday)
RC Controller: bit.ly/2JB0cE5
PLAYLIST: • How To Build Budget Ci...
You need help getting Manufacturing and Product in Market:
dronemeshlabs@gmail.com
Want A Custom Build Email me:
dronemeshlabs@gmail.com
Need Help with something?
dronemeshforum.com
Follow Me on Instagram
/ dronemesh
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon.
/ dronemesh
-Latest Fav Products-
FC #1: bit.ly/2Vz2Gro
Budget ESC: bit.ly/3elmaIu
-- My Tools & Gear 2020--
Goggles #1: bit.ly/2YEjBwT
Google #2: bit.ly/2YDi4q8
RC Controller: bit.ly/2LR9uxc
Main Battery Charger: bit.ly/2SQGWp9
Fav Soldering Iron: bit.ly/2ylZC9O
--Recording 2020--
Audio Interface: amzn.to/36iajaE
Microphones: amzn.to/3g9dyFR
Lav Microphone: amzn.to/3cNDZi1
Camera: amzn.to/2AEk3Qu
2nd Camera: amzn.to/2Tl1YNN
--PC Specs 2020--
AMD 3950x: amzn.to/2WRqEQx
GTX 2060: amzn.to/2XfEOtC
Auros Elite MB: amzn.to/3bNCQ91
Case: amzn.to/2LGMlwb
RGB Ram: amzn.to/2TmVm1G
Water Cooler: amzn.to/2zgeabR
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Contact: mesh.drone@gmail.com - Наука та технологія
PlayList: ua-cam.com/play/PLoPtpxJIxgnZ8oxpQ3GyTiOGzH-QLWnzn.html
Emax ECO 2207 2400kv: bit.ly/2pwsXdk
iFlight SL5: bit.ly/2kBCNZz
RushFPV Tiny Tank: bit.ly/38KFhbo
Rush Antenna: bit.ly/2SQ0ETp
Diatone F60 ESC: bit.ly/2S1tnEw
Diatone F405 DJI: bit.ly/32jWPZQ
Racer Nano: bit.ly/2L6Pzd8
XT60: bit.ly/2T6oQQl
Xm+ Receiver: bit.ly/2Kamywh
Hey you make a build with armattan chameleon 5 frame and also since it was a freestyle frame,please make the ESC 4 in 1.
Hi, could you help me in making aa hexacopter that can aim and fire
I think you've just made the gold standard in quadcopter setup videos. Well done.
I've been watching your channel mostly for reviews, but recently saw these build tutorials. This is an excellent resource for the community. Thanks for taking the time to put together these detailed videos. They are super helpful. I especially like the tips ad tricks you discuss to help keep n00bs from making common mistakes as well as digging deeper to explain some of the tech behind the process of building. Great Job!
Man....
I just hit gold when it comes to FPV drone builds.
Thanks a ton for making this.
It was super duper helpful. ♥️
A friend got me hooked on this. Ordered a frame last night....can't wait to get started. Your videos will make it much less intimidating. Thanks for what you do.
Great video series. You do an excellent job on the build and explain videos; lighting is good, sound is excellent, your explanations are great (always easy to understand). Thanks
This guy never answers questions
Gday DM, nice work mate i like the build great combo of parts keep them coming mate.👍🛸
Very comprehensive set up video!! Thanks Man!
what a wondrful tutorial! ty so much for all the effort you put into those kind of videos! i rly appreciated that! keep going champ!
Saved to favourites 👌🏻 really good walk through
I've learned lots of things from this project so thanks bro.... keep sharing these types of project in your such simple style.
Very well video demonstration. Thank you.
Awesome job, Sam! Thanks a lot! 😃
Your teaching and presentation skills are outstanding. Well done and a big thanks from me... Paul/Sydney
Awesome video 👍 just like the way you start the video.
Detailed and very good quality video ! :)
Love this series!
Excellent beginner tutorial!
Very good detailed tutorial love it. Im going to rip around to in some time :)
Damn how I wish I could see such a detailed video when I started 1 1/2 years ago. Very well done!
Thank you
Like the vids! I'd love to see you do a review of "Holy Stone" quad.
How cool, and probably far more helpful than just using the manual... thanks.
thank you fr the video. Can I add GPS and Return Home features to this type of quad? If so, what part #'s do you recommend? I assume there is a menu option during software programming as well?
Hi I love watching your vids ...I wanted to know if we need to install the Frsky XM Plus Mini Full Range Receiver if we are going to be using crossfire ?
Perfect thank you 😁👍
I'm kinda pissed this came out now because it was a pain in my ass on the first two builds I did. I had random motors spinning different directions. I didn't know BLHeli was a completely different program at the time. Figured it all out on my own though, and I've been flying now a few times! This is a great series for newbs
Thanks. Nice.
Is Taranis & Receiver is flashed with XM+ Accst Software...???
What batery fo you recomend and whats the estimated fly time with it
best software video on the fpv internet
👍 your channel.. it helps me out a lot
Thanks man!
Awesome video sir
Hey man, this video inspired me to get my setup going. ALmost got it done now but having a few issues. My AUX 12 is extremley volatile but I have no switch on the controller set for that function. If you could help me out with that I would appreciate it
Excellent video, you should be a teacher :-) It is all very understandable when you explain it.
Could you please share the model of the GoPro mount on this quad?
Would the F50 work on this build as well? Because i cannot find a stack with the F60
Wonderful video!! At the time of the build, how much did this cost?
Is it possible to use a Spektrum radio with this build? What are your thoughts? Thank you in advance.
Seem to have a video BrinkleyI can't get my vtx display osd or camera. Just a black screen. I've seen others write vtx on fc to vtx on this vtx but here it goes to cam?
Question for a guy who would like to get into the hobby. Should I start at digital and step over the analog systems (the trend is clear with DJI front running the scene) or should I invest into cheap analog system and install a GoPro for footage? My goal is to go into the videography side of the hobby (not racing).
what are batteries in this one?
Hey man you know how I can find a fet got my betafpv fc? I cant seem to find anything when I search got the numbers on the fet
can you share the gopro mount? it's so cool :D, thx for the videos :D
Which controller do you use is it FCC version or LBT version
what propellers for emax 2400kV? 4S
YOU HAVN'T COVERED PROPS! what do i use, and how do I install them?
so i’m having a bit of an issue i have used all the same parts for my build except a foxeer razer nano cam. my quad flys i have flown it line of sight , setup went fine. my only issue is i cannot get my fat shark goggles and vtx to work i have tried everything. setup in beta flight shows that my vtx is connected and talking to my flight controller i have the proper vtx smart audio 2.0 table copied. uart3 is off but tbs smart audio is connected but i go through all the channels i get nothing , one channel tho is black then if i turn my head the picture goes from static to black to static same thing if i wiggle the vtx. could my cam not be working ? any other advice please help i’ve tried everything.
And what propellers should I buy? If it matters at all.
I know this was 11 months ago, but I need help with binding. I have xm+ and x9 lite too just like you. I get to the part where my receiver has both green and red solid LED but my taranis won't bind. It makes a noise when I click Bnd, but the receiver doesn't change at all. Do you know how to fix this?
is it possible to control a custom-built drone with a Mamba stack ECF with something like a phone or a laptop? Not necessarily as a replacement but as a temporary control device.
Can’t you reverse motor direction in betaflight?
What for batery do I need to use?
"These things can chop you up and really destroy you.. Even kill you" I don't know why but that was so funny lol
What is the bl heli software?
Please I need immediate answer how did u connect your flypad to the drown what is the name of the website
What battery r u using
This is what I need...just building my first drone
Is it need calibration,how can we get calibration this drone.
How long can it fly and what's the range
No esc/ motor calibration?
so in angle mode, you cant flip?
Hi, saw your last viedo of the series - great job !! I wondered where i can buy the exact stack you used - couldn't find it. Hope hearing from you.
greetings from Germany !
it will be available within couple days
@@DroneMesh thanks for the quick response do you know how much it will cost ?
Do you have a site where I can buy some of your drones?
I don't understand why you setup the Auxiliary switches in Mixer instead of Input. Could you explain that a little more?
i just build my first drone, in the beginning everything went well and no smoke. after a few day's i turned it on and i got smoke and one of my esc's got burned, can anyone help me out and explain??
what should I do when my receiver isn't work ?
You should add in a short clip about esc calibration in beta flight. A lot of people have trouble with motor by not calibrating them. Great video sir.
No need to calibrate.. that has been outdated for over 2 years now
@@DroneMesh copy that.
what is your vtx name
Digging that tpu battery lead holder.....is that off thingiverse?
Yea its linked below
New to this and haven’t gone through the whole video but what’s the point of having a GoPro mounted on? Don’t you already have a camera?
What about goggles? I can't find in description... Thanks
wait, how did you connect the controller to Beta Flight? is it bluetooth? and when I went to look up beta flight that screen did not pop up so how did you get there?
i think he used a usb for it
😊
6:33 😂😂
Fucking great video 👌 nice step by step
i just built my first quad and everything went good without any smoking parts/resolder/rewire or any other errors :D Camera works, motors spin, inputs work. Im so FUCKING happy !!!
The only thing that doesnt work now is the weather :D Now im sitting in my room staring at my new baby :D
SUMMER WHERE R U AT????????
iv a 4in1 esc and holybro kakute f7. i can only arm and get power to the fc and receiver when i connect my usb to the laptop. soon as i disconnect iv got nothing, no lights or power to the fc, and motors dont arm, this is with the lipo connected aswell. Not sure if it was the esc, but once the fc gets 5v from the usb, everything works, any help would be much appreciated. Thank you
Does your motor beep when connected to battery ? If not then you have a Bad ESC. If they beep but fc doesn't power ON then it's not receiving 5V from ESC, check if vbat/vcc and ground from ESC is connected to the fc. If you have kakute stack then the cable connecting the fc and ESC should be bad, holybro usually gives two set of cables and if all above fails then try manually soldering each pad from ESC to fc
@@mindprobe3587 yes, the motors beep, and all 4 spin..then only 3 spin, and it wont work unless iv got the lipo plugged in, along with the usb lead. Iv given up on it now and ordered the racerstar 4in1 esc. If i get any further problems im honestly never going near a 4in1 ever. I started building with single esc,s 2 years ago, and never had a single problem.
@@k1ortia you are not providing power to your fc. There's a B+ pad on your fc which need to be connected directly to the battery's positive terminal. I have been using 4 in 1 ESC for almost over a year and I didn't face any problem yet.
If your issue is still not resolved, email me at mindprobe101@gmail.com I will be happy to help you
My reciever and my transmitter won't bind. I set everything up as you did, but it wont bind, can you help me?
Start the binding process on the transmitter before powering up the receiver in bind mode (that's what the documentation says). With FrSky stuff your firmware might also be incompatible with each other and you need to update it.
your first link takes me to a 404. is there an alternative source?? im ready to make my first drone and id like to follow youir videos step by step
actuailly quite a few of your links are dead ends.. imma see if you have a more up to date guide.
Can i have one of your fpv quadcopter set with goggles and transmitter please i want that please can you give me please
Aux 2= in case you have a bug mode
I cant bind my receiver. I put it into bind mode with both the red and green lights shown. Then when I press bind on my radio Nothing happens and the red light on the receiver does not start blinking it just stays solid. Does anyone know how to solve this please.
You probably have to flash it with a firmware on the frsky website I’m having the same problem and I’m about to try this but if you found the solution please please please let me know
@@angelmosqueda9470I found the solution a while ago so I'm trying to remember but I think I had to flash new firmware onto the receiver/radio. There was an a American version and an EU version and from what I remember I don't think it matters which one you use along as you have the same on both. My receiver had the EU version and my radio had the US version. Once I made them the same it fixed the issue . Hope this helps.
@@fengaming2679 did you flash the access or the accst?
@@angelmosqueda9470 can’t remember.
@@fengaming2679 did you have to do both the radio and the receiver
Will you do fpv drone footage?
Yes it will be out after tommorow.. In the beginning I played a small clip from today's flight..
@@DroneMesh still waiting for the Part 3 :)
@@iklimchuk I took it out yesterday and the video will be out tommorow it's going to be a 4 part video
I was the 420th view
Its cuz your a beast.. How have you been?
i want to winn a droneee
I whish someone made a guide that we can get the parts from US direct so we didn’t have to wait 1 month to arrive. And another thing is to check the availability of the parts before posting the links. Most of the times the parts are out of stock or 404. Thanks. No hate. Thanks for the video. It’s just that we can’t replicate it. @coronaviruseffect
Please send me one I’ve been trying to get my hands on one but to no success send me one of your old ones much appreciated
The cat is pregnant again.
It costs 300 dollars !!!! This is not a budget build why don't you try doing a 100 dollar build???
Good luck finding the parts 😂 and have fun fixing them when they break
What batery fo you recomend and whats the estimated fly time with it
How much are all the parts for this build?