Dad had a brand new 69 model 1256. I thought I had died and gone to heaven when he bought that tractor. It was a real horse. We pulled 6 16” plow bottoms with that tractor.
Square hood? You must look at them differently than I do somehow. To my eyes the 06 and 56 series have rounded hoods. 66 and 86 series have square hoods. (88 series square too but they're totally different machines.) I agree they are good looking tractors. I can't decide which looks best between 56 and 66 series. So I'll take one of each! Maybe an 856 open station and a 1066 with 2-post ROPS and canopy.
Love this big time.... that era of 806, 1206, 1256, and 1456 was the best; grew up learning to drive them at 12 yrs old.. I’d give anything to be back up in that saddle pulling a disc or field cultivator behind that 12 again. Hell for $17k I just as well buy one to restore to new condition then just drive it out to get the mail!
As a kid I used to run out in the Quonset, climb up on a couple 806’s, or our 1206, or 1456, start it up, pull the throttle a few times, then shut it down. Man I couldn’t wait until dad and our hired hands put that stuff out in the fields. I’d spend 12 hours out there on a Saturday or Sunday at 12 yrs old! Great memories!
These tractors had no def and no computer. It is turned up to get more horse power out of it so that is why it smokes a little. This is a real tractor no need for computer’s
I ran a new 1256 with 4 wheel drive back in about 1969 on a farm in SE Idaho. The front axel was removeable so we would change it to 2 wd when cultivating and 4 wd when harvesting potatoes and doing field work, one year we put a single wheel on to dig sugar beets.
I used to drive a '67 1206 in Australia.They were a big tractor for their time.Whiney transmission and a bit light in weight as when they lost traction they would start to bounce and had to be pulled up quick.Very reliable and a lot of fun to drive with no cab.
Although today's equipment is impressive, these videos of "old" equipment show the character and toughness of the folks that made agriculture what it is today. Neat stuff Mike, you keep bringing the goods! Thanks.
My dad and Grandpa bought one new in 1968 or 69. Had white duals just like this one. Had some trouble keeping in inside tires tight on the axle, but it was a terrific tractor. Pulled a onland 6 bottom plow with a plow down attachment for NH3 and 20' IH disk...
Love them IH motors with a straight pipe. I knew before you told us he had it tuned up pulling that cultivator in high first is not done with a stock engine. My family owns only IH tractors gotta love what you grew up with.
Good looking 1256, looks like he's maybe running 3rd gear low range with t/a forward. IH had lots of power, loved sitting up high with great view of everything.
@@ChevyConQueso the tractor was orginally from Georgia i was told and back then a lot of owners ordered them without T/As because their helpers were hard on them
I worked for a farmer when I was 13 years old. Pulling 2 hay wagons full of bales was a big thing for me. I think our bestest tractor on the farm was 45 hp.
We had one of our customers with a 1086. We dynoed it at double the stock setting. He added duals, and put fluid in all the tires. After the spring planting, he brought it in for repairs. We had to repair the clutch, transmission, TA, and rear end. The drive train, couldn’t handle the extra power.
Funny how we remember those little stories from years back. And then can’t remember 5 minutes back. At least I do that. IH jumped in numbers from 856 to 1256. Would have made sense to add another tractor in there. Which I guess they did with the 826 and the 1026.
@@stubbi In 1969, if you bought a tractor of this horsepower range, you could order a cab with it. Back in 69, saw 1256 with a cab at a fall fair in Simcoe, Ontario, Canada.
My dad had a 1256. Big tractor in its day. Changed the rod bearings at 6800 hours and they were bronze looking. Did it for preventative measures since my dad's JD 3010 had a rod bearing slip. Pulled a 28 foot cultivator with the IH. Sang along with the tranny whine.
Excellent video my friend, love the IH stuff 06 series, 56 series, etc and 66 all awesome hard working tractors, first big diesel I ever ran as a kid was a 1963 706 diesel thought that I had died and gone to heaven as our stuff was small John Deeres ( great machines by the way),great video my friend as u are showing the tractor as opposed to showing the hood and exhaust pipe, love it bro thanks
Mike , lol , in 1968 was when I graduated high school .. I ran an 856 with a 6 -14 International plow . I don't remember the next size tractor I had , maybe we jumped to a 1456 . Yes the 1026 hydrostatic was terrible to drive luckily I didn't have to as my boss always drove it Great video it reminded me of my past life in farming for 35 years ...
We had a 656, bought new. Single rear wheels non turbo I think. It did have that am radio on the right fender though. I was still too young to run it so I don’t know if you could have heard that radio over the motor. Awesome video thanks.
Good video, Damn good tractor, and "one of the old school" as we in the UK say driving it. Farmers over here have to buy new or nearly new as none of the "millennials" know how to drive a tractor like that. My late wife had been driving a tractor on her grandads farm (150acres), - I know small by your standards - The tractor was a Fordson E27N - since the mid '50's she started at the age of 8. We bought it off him when he 'sold up', kept it, did it up, and took it to rallies, - had a great time, then my wife died 10 years ago - I still have the tractor and the memories. As for me I'm 75 this year.
my family were working on a dairy back in the late 60s and early 70s and the owner bought a brand new 856 diesel we pulled 6 bottom plow at 16in and a 21 foot disc with it also did numerous other jobs it pulled the plow in 4th lo torque amp in high same with the disc
International build 1056 model of tractor but for Europe market...in Europe they are legendary tractors, especially 1455XL model of CaseIH..We call it Legend from Neuse (it is city in Germany where they built it, not any more). My uncle have one, bought new in 1990, still pull like hell and work perfectly and it has around 17000 hours on it...
The $2++ million in equipment inventory is unrealistic for most sub two thousand acre farms. but actually the half-million $ combo would do the job faster, better results. Most farms do NOT have a 6 $ figure *you tube* income to purchase $200k planters, slightly used $400k tractors & 2 year old combines. Sad part is non- farmer viewers might believe the farmers ALL live in TOY LAND & the day's biggest decision is what to buy next?, How about a new $70K pick-up, then spend $10k more to customize it 💰💰.
@@diersirrigation loved your comment. My son, a 25 year old throw back to the Great Generation took my ‘99 Dodgeto the Ford dealership to get it inspected the other day. He said the young person came out, looked in it, walked around it, came back in a passed the inspection. I asked him why the kid didnt drive it and he informed me that most of these young’uns nowdays DO NOT KNOW HOW TO DRIVE A STANDARD! In shock... I asked him why and he said “They dont make them anymore. You cant even special order one now” i had that stupid look on my face and he told me I need to buy a new truck more often.
with the good video you made... I thought it was interesting to observe that even with all of the counter weight on the front, that old girl was till nearly pulling the front wheels off the ground because she put so much horsepower on the ground with those duals. if you watch the front wheels carefully you can see they just glide alond barely makeing contact occaisionally while pulling htat heavy load at a pretty high speed.
there is a International 1056 model, but only for europe i think, check it out with google , there are lots of International 1056 here in europe and they are very popular for tractor pulling and so on
Awesome video Mike I sure do love the old red iron she looked happy out there stretching her legs And did I notice correctly there was no T A on that tractor ?
Och aye, - the dumb stories! but life is full of them - adds some color / spice to the everyday mundane. Nice little reminders / refreshers : that White was tied with New Idea. Bu poor guy on the Seat, hanging on to a Bucking Bronco: illustrates the problem causing back-Pain - but I still prefer to sit back to be able to see the PUH and drawbar pin without mirrors those modern thingys where you sit somewhere in the middle, up high like a Cat on a chimney can, getting rocked about. Mind you there's plenty reflex activity to keep yo warm: Question derived from this spring's weather: DID N American farmers always sow / plant Spring crops in the frost ? here in UK you would be expecting to sit in short sleeves ( almost). This has been a cold year all round. Thanks for making this vid for us.
I really dont think that the driver in this video is making that mistake. With a disk, okay, you can clearly see the small furrow it makes and you are sure not to overlap on the next pass. With a field cultivator , it scatters the soil somewhat and does not allow for a clear guide when doing the next pass. That being said, its better to overlap a little. In short, I would do the same as this gentleman does, to be sure that the ground is thoroughly worked.
Dad had a brand new 69 model 1256. I thought I had died and gone to heaven when he bought that tractor. It was a real horse. We pulled 6 16” plow bottoms with that tractor.
I like that series of IH tractors,square hood and long wheel base...good looking tractors.
Square hood? You must look at them differently than I do somehow. To my eyes the 06 and 56 series have rounded hoods. 66 and 86 series have square hoods. (88 series square too but they're totally different machines.)
I agree they are good looking tractors. I can't decide which looks best between 56 and 66 series. So I'll take one of each! Maybe an 856 open station and a 1066 with 2-post ROPS and canopy.
Love this big time.... that era of 806, 1206, 1256, and 1456 was the best; grew up learning to drive them at 12 yrs old.. I’d give anything to be back up in that saddle pulling a disc or field cultivator behind that 12 again. Hell for $17k I just as well buy one to restore to new condition then just drive it out to get the mail!
We farmed 35 years with a 12 and an 856. Gave the kids the 8 for an acreage tractor and have the 1256 still. May get er painted
Do it..
As a kid I used to run out in the Quonset, climb up on a couple 806’s, or our 1206, or 1456, start it up, pull the throttle a few times, then shut it down. Man I couldn’t wait until dad and our hired hands put that stuff out in the fields. I’d spend 12 hours out there on a Saturday or Sunday at 12 yrs old! Great memories!
One thing he does not need to do is to put DEF in it or call the dealer to come out and reprogram the tractor...
These tractors had no def and no computer. It is turned up to get more horse power out of it so that is why it smokes a little. This is a real tractor no need for computer’s
@@rodbolinger8884 I’m pretty sure he knew that. That is why he made the comment.
@@thesmokewagon6302 LOL
Good old tractor. Wish they built them today like they did back then
Great awesome video mike, that tractor does the same job as good as a million dollar tractor and cultivator , that’s a true fact .
Hope he has ear plugs in.l remember those days. Good too see these older tractors getting it done.
oh ya, the sounds and smells of fresh dirt, and also trying to stay warm
Part of the reason I have to wear hearing aids today......
I love those tractors from that series and vintage.
I ran a new 1256 with 4 wheel drive back in about 1969 on a farm in SE Idaho. The front axel was removeable so we would change it to 2 wd when cultivating and 4 wd when harvesting potatoes and doing field work, one year we put a single wheel on to dig sugar beets.
Now that’s a cool story for sure!
I used to drive a '67 1206 in Australia.They were a big tractor for their time.Whiney transmission and a bit light in weight as when they lost traction they would start to bounce and had to be pulled up quick.Very reliable and a lot of fun to drive with no cab.
Although today's equipment is impressive, these videos of "old" equipment show the character and toughness of the folks that made agriculture what it is today. Neat stuff Mike, you keep bringing the goods! Thanks.
Red Power earning her keep thanks Mike!
Love 1456's. Ran one for years on the farm I worked at along with 806 wheatland and 1066 hydro's. Would love nothing more than to have one of my own.
Those were the days! Tillage wearing thick warm clothes in the open air...no GPS or auto steering.
In my day auto steer was a fence post at the other end of the field
Still no gps or suto sterer...Dont want it either
I worked for a guy in the 80's that had an 806, 1256 and Steiger Bearcat. Nice to see the old iron working!
My dad and Grandpa bought one new in 1968 or 69. Had white duals just like this one. Had some trouble keeping in inside tires tight on the axle, but it was a terrific tractor. Pulled a onland 6 bottom plow with a plow down attachment for NH3 and 20' IH disk...
Love them IH motors with a straight pipe. I knew before you told us he had it tuned up pulling that cultivator in high first is not done with a stock engine. My family owns only IH tractors gotta love what you grew up with.
Those were great looking old tractors IMO.
That's some pretty cool tillage work going on. Love the duals on those 2wd tractors. Very nice.
Good looking 1256, looks like he's maybe running 3rd gear low range with t/a forward. IH had lots of power, loved sitting up high with great view of everything.
I was running 1 high and the t/a is factory deleted to its forward permanently
@@justinmillhouse4426 What is the reason for deletion? Reliability via simplicity?
@@ChevyConQueso the tractor was orginally from Georgia i was told and back then a lot of owners ordered them without T/As because their helpers were hard on them
Hi Mike love your videos
I worked for a farmer when I was 13 years old. Pulling 2 hay wagons full of bales was a big thing for me.
I think our bestest tractor on the farm was 45 hp.
Good Morning From New Zealand, great Mike Less Vlog, Have a wonderful Sunday, thanks for sharing
Thank you Mikey took me back about 50 years big red power
I like you're dumb story's Mike. Love the old school farm life. Can't beat that old Iron.
That ground worked up really good! I could watch this tractor all day long
We had one of our customers with a 1086. We dynoed it at double the stock setting. He added duals, and put fluid in all the tires. After the spring planting, he brought it in for repairs. We had to repair the clutch, transmission, TA, and rear end. The drive train, couldn’t handle the extra power.
Nope..He should have left it alone....
Funny how we remember those little stories from years back. And then can’t remember 5 minutes back. At least I do that. IH jumped in numbers from 856 to 1256. Would have made sense to add another tractor in there. Which I guess they did with the 826 and the 1026.
Another beautiful ole beast working thru retirement like it didn't get the memo that the good ole days are gone.........
"Golden Age" of farming....open station...no monitors....!!!
Damaged Hearing..... Tinitus....
@@stubbi In 1969, if you bought a tractor of this horsepower range, you could order a cab with it. Back in 69, saw 1256 with a cab at a fall fair in Simcoe, Ontario, Canada.
My dad had a 1256. Big tractor in its day. Changed the rod bearings at 6800 hours and they were bronze looking. Did it for preventative measures since my dad's JD 3010 had a rod bearing slip. Pulled a 28 foot cultivator with the IH. Sang along with the tranny whine.
Excellent video my friend, love the IH stuff 06 series, 56 series, etc and 66 all awesome hard working tractors, first big diesel I ever ran as a kid was a 1963 706 diesel thought that I had died and gone to heaven as our stuff was small John Deeres ( great machines by the way),great video my friend as u are showing the tractor as opposed to showing the hood and exhaust pipe, love it bro thanks
Mike , lol , in 1968 was when I graduated high school .. I ran an 856 with a 6 -14 International plow . I don't remember the next size tractor I had , maybe we jumped to a 1456 . Yes the 1026 hydrostatic was terrible to drive luckily I didn't have to as my boss always drove it Great video it reminded me of my past life in farming for 35 years ...
One of IH best tractors made
I have one of those IH 1026 that I still use a lot
We had a 656, bought new. Single rear wheels non turbo I think. It did have that am radio on the right fender though. I was still too young to run it so I don’t know if you could have heard that radio over the motor. Awesome video thanks.
You had me at Turbo......
Hey Mike , the 1056 is still running in europe , workt meny houers with them . Rated on 105 Hp . We had easy 120 Hp out off them.
That is a cool looking tractor!
Awesome video. What a great classic tractor😁👍
Awesome setup! I love running an open station!
Good video, Damn good tractor, and "one of the old school" as we in the UK say driving it. Farmers over here have to buy new or nearly new as none of the "millennials" know how to drive a tractor like that. My late wife had been driving a tractor on her grandads farm (150acres), - I know small by your standards - The tractor was a Fordson E27N - since the mid '50's she started at the age of 8. We bought it off him when he 'sold up', kept it, did it up, and took it to rallies, - had a great time, then my wife died 10 years ago - I still have the tractor and the memories. As for me I'm 75 this year.
Great Tractor !
I'm not an IH guy but I do like the 56 series
👋thanks 👍😊
A very good video. Thanks for showing.
Soils working up good.probly find a few arrowheads in that field.
Love that old school look, thanks for the video 👍👍's.
my family were working on a dairy back in the late 60s and early 70s and the owner bought a brand new 856 diesel we pulled 6 bottom plow at 16in and a 21 foot disc with it also did numerous other jobs it pulled the plow
in 4th lo torque amp in high same with the disc
Awesome Mike Love that sound
International build 1056 model of tractor but for Europe market...in Europe they are legendary tractors, especially 1455XL model of CaseIH..We call it Legend from Neuse (it is city in Germany where they built it, not any more). My uncle have one, bought new in 1990, still pull like hell and work perfectly and it has around 17000 hours on it...
The best handling international ever built, the 56 series
If they were the best they’d still be making them.
Pretty good straight rows
Oldie but goodie! 😍
Uuuuhm...😳
I was thinking of the tractor...😉
Thanks a lot for the video!😊👍🏻
Half a million dollar new tractor and digger wouldn't do any better job than he's doing.
But the millenials wouldn't know how to drive it, they'd have to hang on to the steering wheel and pay attention.
The $2++ million in equipment inventory is unrealistic for most sub two thousand acre farms. but actually the half-million $ combo would do the job faster, better results. Most farms do NOT have a 6 $ figure *you tube* income to purchase $200k planters, slightly used $400k tractors & 2 year old combines. Sad part is non- farmer viewers might believe the farmers ALL live in TOY LAND & the day's biggest decision is what to buy next?, How about a new $70K pick-up, then spend $10k more to customize it 💰💰.
@@diersirrigation loved your comment. My son, a 25 year old throw back to the Great Generation took my ‘99 Dodgeto the Ford dealership to get it inspected the other day. He said the young person came out, looked in it, walked around it, came back in a passed the inspection. I asked him why the kid didnt drive it and he informed me that most of these young’uns nowdays DO NOT KNOW HOW TO DRIVE A STANDARD! In shock... I asked him why and he said “They dont make them anymore. You cant even special order one now” i had that stupid look on my face and he told me I need to buy a new truck more often.
Big field right here. Looks to be 25 acres
Love old school farming
Thank you.
IH did build a 1056. 105hp built in Germany 1982-1985, possibly only sold in Europe.
Those 56s aren’t the same, and I do believe it was Europe only
I like Mike less videos. From the imperial co California.
👍awesome video. More like this please
Awesome video 👍👍
with the good video you made... I thought it was interesting to observe that even with all of the counter weight on the front, that old girl was till nearly pulling the front wheels off the ground because she put so much horsepower on the ground with those duals. if you watch the front wheels carefully you can see they just glide alond barely makeing contact occaisionally while pulling htat heavy load at a pretty high speed.
The very nice ford versatile color blue
We have an 856 and a 1256 both have the 407 block. Don’t have to pull the torque back often.
So do we! Truth
there is a International 1056 model, but only for europe i think, check it out with google , there are lots of International 1056 here in europe and they are very popular for tractor pulling and so on
Very cool Mike👍. Old school all the way including no cab. Would probably feel pretty beat up after riding over that field all day??🤔
Just my kind of tractor.
Kind of surprised it pulls that thing as well as it does.
hw are the 4 wheel and the tracks sales comparing
And in 1969 no one my age there wanted a job in a tractor factory in Rock Island.
Mike you have not a video of the ford 9600 with duals with cultivator
Awesome video Mike I sure do love the old red iron
she looked happy out there stretching her legs
And did I notice correctly there was no T A on that tractor ?
T/A was deleted from the factory
Its very very nice mike but the color blue
Och aye, - the dumb stories! but life is full of them - adds some color / spice to the everyday mundane. Nice little reminders / refreshers : that White was tied with New Idea. Bu poor guy on the Seat, hanging on to a Bucking Bronco: illustrates the problem causing back-Pain - but I still prefer to sit back to be able to see the PUH and drawbar pin without mirrors those modern thingys where you sit somewhere in the middle, up high like a Cat on a chimney can, getting rocked about. Mind you there's plenty reflex activity to keep yo warm: Question derived from this spring's weather: DID N American farmers always sow / plant Spring crops in the frost ? here in UK you would be expecting to sit in short sleeves ( almost). This has been a cold year all round. Thanks for making this vid for us.
I want that tractor
No hearing protection was necessary because farmers were mostly already deaf then by the time they could afford the 1256.🤔🙊🙉🙈
It’s true, the guy who bought a 1256 new started with horses or an F20...
we had a 1026
PUR Sound I like
Coleman made those FWA axles
I think they made 1056xl in France
1056 exist manufactured in france to EU market
You won't touch a good 1256 for 17k right now.
👍👍👍
Now you're talking
you had gave your age im one year yonger than you i would love to talk with you on the phone
I can't understand why drivers overlap so much. They waste 3 feet of the machine's capacity every pass.
I really dont think that the driver in this video is making that mistake. With a disk, okay, you can clearly see the small furrow it makes and you are sure not to overlap on the next pass. With a field cultivator , it scatters the soil somewhat and does not allow for a clear guide when doing the next pass. That being said, its better to overlap a little. In short, I would do the same as this gentleman does, to be sure that the ground is thoroughly worked.