How to Drill a Hole into a Glass Bottle | Using Only a Regular Drill Bit
Вставка
- Опубліковано 19 жов 2024
- In this video i drill a hole through a really cool glass bottle using a regular wood drill bit.
Here's what I used:
Drill
Drill bit
clamps
glue gun
glue
water
table
patience
Thanks so much for watching. If you have any questions please let me know in the comment section!
how do i cut through glass,how to cut a hole into a glass bottle,how to cut a hole into glass,how to cut through glass,how to cut through glass without it cracking,how to drill a hole into a glass bottle,how to drill a hole into glass,drill a hole in a glass bottle,drilling a hole in a glass bottle,how to cut glass,how to drill glass,lifefixx,How to Drill a Hole into a Glass Bottle
I think your friend wanted to build something other then it for leds... May I say a bong? Lol
How could I be so naïve!
That’s exactly y I’m here
That would literally be the worst place to put a stem though.
@@danzig8985 It's a gravity bong hybrid. The stem is the top of the bottle in this situation, the hole at the bottom is to release the water and pull the smoke into the bottle.
ah yes, the exact reason im here
“LED Lamp” 🤣🤣
bong
😏😏😏
Thanks, seeing your difficulties was more useful than seeing how well things can go!
I opted for drilling mine in a bucket of water.
Worked really well.
I cracked the bottle quite badly, but that was because I pushed too hard…. 😫
Don't drop the electric drill into a bucket of water, it might tingle if you hold on to the sparking drill.
I'm doing a project where I need to cut a bottle in half and drill 2x 10mm holes in it - which should you do first?
Tip;) add tape over the spot where you will drill like this the bit don’t move take a plastic bottle make a tiny whole fill with water close with the cap open the cap a bit and water will flow like a tape over the whole you drill close to stop water flow in the end best is to use bits for glass😉
Good idea. I have seen people use tape when drilling into glass. Thanks!
Great tip. But also, punctuation! I had a stroke trying to read this 😅
Many bongs were made that day
Glue gun trick was really smart but you also could’ve just filled the thang with water
Your video should have been entitled: "Why NOT to use a regular drill bit to cut a hole in glass" ...but, you have guts posting your mistakes👍
If you put your drill into reverse and go slow it's a lot less likely to crack because the bit isn't biting into the glass but it will be very slow
very nice video. i have a similar situation not with a glass skull. but i wnated to know how to seal a hole on glass or hard plastic wihout visible traits of the hole with a perfect seal
That's a difficult question to answer. I think your answer is epoxy.
Aye ive got a drill and a glue gun at home, thanks for this technique it might work and i might get a bong, but i know ill break the glass lol, so ill buy a glass drill bit from a local shop instead.
What brand drill guns are good
You didn't keep ut lubricanted after the drill bit made initial hole
Could you put it inside a bucket of water and then drill it?
That should work even better imo
Put it under water.
I just learned about the rehbinder effect.
Why not just use prit stick?
who else tryina make a bong
Me
It worked amazingly!
She was making a "lamp" suuuuure :p
Yup..... She actually showed me pictures of the lamp she made after I posted this video. I wished she showed them to me before I posted then I would have included them in this video..... That would have proved wrong everyone who's made a 'bong' comment.
Ayo why the hell are u here lmao I was just watching some of your stuff
Didn't ever think a normal wood drill would be capable of that 🤔
Yup. It's definitely not ideal for a nice clean cut. But it can be done. Thanks for watching!
Nice
Thanks!
Your video should be Titled: " Why NOT to use a regular drill bit to cut a hole in glass" ...but you have guts posting your mistakes👍
That skull bottle has a liquid reservoir with much greater capacity built right in.... How could you have missed that?
You cracked it! So this video should be titled How NOT to drill a hole into a glass bottle"!
Calmer there bud
A hose trickling constantly might have been easier
Yep totally gonna use it for the intended purpose totally not a bong
I'm going to try doing it by just filling the bottle up with freezing cold water, then putting tape on the outside to stop the drill bit sliding, 😂😂😂,just a thought
Next breakthrough: put it in a water filled bucket
YO WTF I SEARCHED HOW TO CUT A HOLE IN GLASS BC I WANTED TO CUT A HOLE IN THIS EXACT SKULL BOTTLE!?! OMG😭😂😂
Nice. Hopefully you do a better job of cutting a hole than I did lol
Wouldn’t a sink have been easier to drill it in ?
You couldve just filled the bottle with cold water.
Bro what’s wrong with you?you screwed up 😆
would have been faster to drive to a home center and buy a drill bit for glass.
Definitely! I wish I did the same. But that's not what this video was about!
@@neilhatherall Indeed. Just making an observation.
Next time try filling the bottle with cold water before drilling
That is a really good idea! Smart! Thanks for the suggestion!
Actually it's not..
The inside of the glass will be cool enough butter heat on the outside from the friction will Crack the glass fast than no water
Who else rubbed the back of their neck watching this?
uh, what if you don't have a glue gun?
Just put get some putty or plasticine and make a small reservoir .
Should have drilled and turned it the opposite way to it would have caught waaaay less… imma try tmrw n comment back
well, did you
Maybe add duct tape on the inside . Wood splints when you finish the cut. Unless you cut from the other side up before you reach it.
The problem is the force applied to the drill and just a little twist of wrist will cause the drill to behave as a lever against the glass. Specialised drill bits are much more forgiving in this aspect as they are a blade on a narrow shaft.
4:45 Roto 😒
Well.... that's 2 mins and 54 seconds wasted of my life
That fuckin' lit intro is back again! :D
I think I do like the original theme song better. You commented, and I listened!
@@neilhatherall Great!
It pays to get the proper tool thats always going to be weak now and one drop its gonna smash easy
Yup. Trying to do a job with the wrong tool isn't the best idea. Thanks for the comment
What a waste of my time . This doesn’t work. No one is interested in this.