On your radiator cover, if you don't put the o ring back in place every time you remove it, it will fly off while trailering the 4 wheeler down the roadway, I learned the hard way. the o ring comes out of place when you remove the cover.
I just ordered the 12" for my rubicon 520. I run the Badlands ZXR 3500 winch on 2 bikes with synthetic rope. They are great winches. Very quiet and never had a problem
I mounted Nilight mini bars on my 250cc and it was WAY too bright to ride in the woods. The reflection of the light would blind the hell out of you. But, great lights. Very durable and inexpensive.
I just got one.. Great so far but I haven’t had luck with the cheap ones in the past. It is Bright... cant even tell my regular lights are on or off ???... I got the clamps and no problems with shaking
The output is from 30v. How have you guys fed them 30v? I know a second battery in series would get 28v, but seems like overkill. 2 capacitors in series would work. What do you recommend?
Thank you, I am considering adding a Nilight to my ride (I have the same as you, Honda Rancher 420) but am considering the 12inch and attaching to my handle bars. I heard you say you had considered or may do it. Thoughts? I am considering the handle bars for turning brightness and keeping the beam where I am steering, seems you have enough side light that turning is not a big deal. Thanks for your post.
I'm still considering the 12 inch but the more I use it the more I appreciate the bigger one but you can't go wrong with either. Just wing it to your preference
I carefully chose a spot on the "tank cover", left side, making sure there wasn't anything directly behind it to interfere when I went to reattach the cover. I was slightly off in my eyeball decision. But the wire connectors in the back of the switch bent enough to facilitate easy install (I wasn't far off, just a hair). Take time, think it all thru "measure twice, cut once" and you will do fine. I was so nervous "what if muck this up and need to replace everything . . ." Laughed afterwards, it's pretty simple and the ole after I finished was big. If I could add photos I would.
2 year review coming ? I order the 4 inches one's and they are absolutely 100% garbage.... Lens and cooling fins are very flimsy.Plastic side covers.very thin wire.Hardware started to rust within a week..
On your radiator cover, if you don't put the o ring back in place every time you remove it, it will fly off while trailering the 4 wheeler down the roadway, I learned the hard way. the o ring comes out of place when you remove the cover.
Thanks for the tip . Thanks for watching I'll keep it in mind
I just ordered the 12" for my rubicon 520. I run the Badlands ZXR 3500 winch on 2 bikes with synthetic rope. They are great winches. Very quiet and never had a problem
I been waiting on HF to drop that 20 percent coupon but haven't seen it I'm have to get one soon
@@clarkindustryz5409 Harbor freight doesn't have coupons anymore. You might be able to get it on sale though
@@iBleedStarsAndBars Shame prolly be on a parking lot sale one day lol
@@clarkindustryz5409 They dropped a limited 20% off coupon this morning for fathers day, lol
@@iBleedStarsAndBars nice gonna have to head that way then
I mounted Nilight mini bars on my 250cc and it was WAY too bright to ride in the woods. The reflection of the light would blind the hell out of you. But, great lights. Very durable and inexpensive.
I just got one.. Great so far but I haven’t had luck with the cheap ones in the past. It is Bright... cant even tell my regular lights are on or off ???... I got the clamps and no problems with shaking
Gonna get this light for my superduty. Thanks for the good review!
The output is from 30v. How have you guys fed them 30v? I know a second battery in series would get 28v, but seems like overkill. 2 capacitors in series would work. What do you recommend?
It’s bright as hell, I sink mine and idk if I should get one or not.
Let me know what you went with for a winch. I'm about to buy a base model.
Thank you, I am considering adding a Nilight to my ride (I have the same as you, Honda Rancher 420) but am considering the 12inch and attaching to my handle bars. I heard you say you had considered or may do it. Thoughts? I am considering the handle bars for turning brightness and keeping the beam where I am steering, seems you have enough side light that turning is not a big deal. Thanks for your post.
I'm still considering the 12 inch but the more I use it the more I appreciate the bigger one but you can't go wrong with either. Just wing it to your preference
Update ? Where did you drill the whole for the ok/off switch
I carefully chose a spot on the "tank cover", left side, making sure there wasn't anything directly behind it to interfere when I went to reattach the cover. I was slightly off in my eyeball decision. But the wire connectors in the back of the switch bent enough to facilitate easy install (I wasn't far off, just a hair). Take time, think it all thru "measure twice, cut once" and you will do fine. I was so nervous "what if muck this up and need to replace everything . . ." Laughed afterwards, it's pretty simple and the ole after I finished was big.
If I could add photos I would.
Was the music necessary?
Is your comment necessary.
Do you need to buy anything else or just the light?
All the hardware comes.with the light
I’m about to buy me some of them, as soon as you turned them on I though it was daytime😂
I got the license plate frame they make to put on vehicles I'm putting this one in my truck an get a smaller one thing is really bright lol
All the extra movement of the camera almost makes me dizzy and very distracting. Music is annoying too. Good info about the light.
Hf winch is good i use mine for a plow. Wireless system.
good lord in heven and people are saying that isnt bright thats bull thats brighter than hell
Very bright an still holding strong
Which model is this?
How many watts is this?
Where did you get that front end top grill you got an Insta
That came on the rancher if you dont have one contact your dealer you should have that
Thanks a lot for this review.
Thank you for watching
Is the light still running?
Yes it's actually off an planning on getting smaller. Gonna put this one in the video on my boat
@@clarkindustryz5409 nice thanks for the reply
Nice
2 year review coming ? I order the 4 inches one's and they are absolutely 100% garbage.... Lens and cooling fins are very flimsy.Plastic side covers.very thin wire.Hardware started to rust within a week..
Oh man mine is still blasting I actually put it on my truck ill do a 2 year review on it for sure