I Built a Refinery Transport Trailer for Crushing Rocks! (Scrap Mechanic Survival Ep.26)
Вставка
- Опубліковано 11 лип 2024
- Hey everyone back with more Scrap Mechanic Survival! Today we are back and finally building a better method for mining rocks! This trailer is another addition for the transport truck that allows us to bring a portable refining station wherever we need to!
-------------------------------------------------------------------------------------------------------------
Discord: discordapp.com/invite/sCvA5SV
Merch: teespring.com/en-GB/stores/ka...
-------------------------------------------------------------------------------------------------------------
About Scrap Mechanic:
store.steampowered.com/app/387...
-------------------------------------------------------------------------------------------------------------
Music from filmmusic.io
"Feelin Good" by Kevin MacLeod (incompetech.com)
License: CC BY (creativecommons.org/licenses/b...)
#scrapmechanic #kangaming - Ігри
Scrap man builds “ I need thousands of concrete blocks”
Kan builds “give me all the controllers and I’ll make it compact”
Because hes making hes base not builds like this
You can put a bearing on the solid side of the resource collector.
I've had much better luck mining with the drills running at a low speed. They bounce around less and grind far more consistently, plus they use less fuel.
normally, the power slider doesn't affect consumption, i've done a lot of testing some months ago and max power and minimum power on any level of GAS engine ( I'VE ONLY TESTED GAS DONT INSULT IF IT'S DEIFFERENT WITH ELEC) stops at the exact same time.
level 5 controllers is the best. consistency
I spin my drills with my hammer cause I'm too lazy to make a vehicle.
@@weewoo341
power slider certainly does affect consumption because mass is taken into effect. the more power you have the faster it spins the bearings, this consumes more power to go faster. makes perfect sense and the math in the gas engine script itself states this as such. speed isn't free.
@@rocksfire4390 controller speed is
this needs more hype thats actually pretty cool
WHOOOOOOOO!!!!!!!
Shh rat
Shh rat
Shh rat
Shh rat
When you do the opening on top, then you can make the side door out of glass, so you can still see through
Loved the Video too :)
Build a rv (transportable base) so you can work on long project and not have to go back to your base
This idea is underated
That is such a good idea
An rv*
Piston powered RV, too.
So infinite travel and all that, he would need to build a craft bot, cook bot, a refinery bot and all that
Love your vids man you make my day every time I watch your vids
Me to
We have the car guy and computer boy
Hey man you should build an ATV (four wheeler) for moving around and have a small trailer on it for storage
he does have an ATV
@coler154 no he doesn’t and FIREYTHRASH has a great idea
coler154 he only has a buggy for now
@Jacob Beckmann thank you
@@Onion1976 thank you
Mount a crane on the tailer at the back with a grapple on it and the next to it mount a arm with the drill head one all controlled from one seat on crane at back of trailer saves time loading and also on multiple vehicles and steps
I have kind of tried to do this, but the pistons that holds things up is far to weak to make it work consistently
Next vid
Personally I'd build a claw arm similar to the farmer collecter for picking up rocks. Lose the drawbridge door, and trigger the pusher and drills with sensors so you don't have to think about order of operations, you can just get straight back to picking up a new rock.
Something amazing is happening......
Kan is not painting his bearings
Lmaooo
F
This guy is not kan
What is life now
A
i'm loving the trailer a lot.
The little bulldozer didn't get the job done but i think you got the right idea with the Loader.
If it were me, i wouldn't change the trailer at all, i would simply improve on, or change the bulldozer to something that works better and that's it.
The trailer is perfect as is, even with the side door.
You could convert the pusher to pinch the rocks, extend a pole or two under it in case it slips and then lift the pinchers up like a forklift. Will need more weight on the back but this way you don't need to entirely shred the cute pusher idea.
You really are good at minturized efficiency. Every build exercises my eyebrows quite a bit XD.
Scrap man: makes different vehicles for different purposes
Kan: MORE TRAILERS!!!
I too enjoy grinding on rocks in my trailer.
O_O umm is it just me or ... that sounds wrong......
@@darwinsteenburgh6535 it's not just you
Children*
@@meowzermeow r/cursedcomments
WOW😂😂😂
I wish they had angled blocks so you could make a better ramp and a scoop for your mini dozer. So here's an idea, for your dozer maybe put a small floor and some rotors on the dozing part to lift it? Allows you too change the angle of the dozer's pusher and a floor to actually scoop the chunks and lift them of the ground. Maybe some front grabbers that swing in from the front to push the rocks into the scoop?
Use a single switch for the drills and wood wall.
Use some ramps on the outside door to be more flush with the ground.
I would: A) put lights in the roof of the trailer so you can see what's going on inside during the night; and B) make a crane on top of the trailer, perhaps where you had space for the bulldozer. You could also make the door be on the roof and move the proposed lights to the floor, this way you can load the rocks from the top of the trailer.
If the mining crane was on the trailer the trailer would move too much
@@ghst1376 he could put stabilizing legs that fold out, similar to those on firetrucks.
True but maybe scrap mechanic physics won't allow that
Nice idea can’t wait to see the finished product
Was at a trade show once and saw a robot arm that was using several tools. Tools were mounted in a star pattern and the fixture on the end of the arm would rotate depending on what tool is needed so that same arm could stamp the part number, stamp part info, and then cut the part to size.
I think a similar idea would work great on this mining trailer: one arm mounted to the trailer itself that has a drill or can flip the end around for a grabber.
I think the way to go about the mini bulldozer situation is to make a scooping vehicle that has a bottom layer + walls which can be pushed into the actual grinder itself. It'll save time, require less effort, and overall make pife easier.
Also, put stuff on a max spinning L.5 Controller instead of engines on Loop, it saves fuel for more important scenarios
Love your content, keep it up
Get rid of the drawbridge style, downwards-opening door and make the trailer sit as close to the ground as possible. Then put the hitch pin and trailer wheels on pistons so you can raise the trailer to move it without it dragging on the ground.
Edit: Make a replica _Killdozer_ and use it as you rock mover. That would be epic
It's definitely possible to push multiple rocks with a bigger vehicle. Just bulk that up with some higher-tier concrete, widen the wheel base and the blade and put some slanted"wedge" pieces (base extension or small steel bracket, from road security checkpoints outside warehouses) on the bottom of the blade so you don't drive over them. The excavator/grappling crane sounds good, as long as it can grab multiple rocks and isn't too slow. A more powerful front loader/dozer would work great with the current trailer, especially if you also put slanted parts on the end of the ramp.
Idea: make a light pickup for transporting light transport
Edit: I know, not a very creative idea, but I'm sure can Kan can make it interesting
can kAN can
Hey you should go find my comment it is an idea of a ATV with a small trailer for storage
He's prob gonna see this and go" Oh cool hey i know! I will build some sci fi transport
This creation is pretty cool, Like the unique take on solving this problem :) would love to see the next version
I can't really see why you don't just leave the drill attached to the trailer.
Because you have to apply some pressure to the rock otherwise it bounces off, and the trailer would slide around so much it'd be a pain.
@@stevepittman3770 weld the trailer.
@@Blaez_Dev That defeats the whole purpose, so thats why he welds the drill to the ground instead.
@@Blaez_Dev If you're gonna weld things, he can just weld the drill like he has been and it's easier to move around than a trailer.
You should put that drill onto the Little bulldozer and builen on the back of the trailer a Little garage with a ramp to go to the ground and close the garage and in the garage you can weld him for extra safety
Need to use the small ramp pieces on the end of the door should help pushing the rocks in
kAN good job making all of your builds, one of the most experienced people out there on Scrap Mechanic.
The most'
I like the individual machine approach.
I think a simple fix for the bulldozer would be wedges along the bottom edge of the blade, cause the biggest problem (aside from not pushing much) is you kept driving over them on the ramp. Robot arm is probably the way to go, tho if they're that heavy it'll have to be really sturdy. Top-loading, of course, but maybe with a latchable lid to keep them from bouncing out?
Mark peeler had an idea for an rv, but i think you should have food storage in the nose of the truck for the same reason. I remember that you removed the food depositing system from the truck, so I think that you could have quite a bit of storage space for even spuds!
If you have the piston stop a little short, you could use sensors ganged to an OR gate to activate the drills - they'll only turn on when there's something to crush.
The bigger problem I find is filling the collectors - a single refiner can't keep up. It's the heaviest thing on the trailer, though.
My current go-to is to have a vehicle with drills on the front and arm on pistons go up and over the rock and pull it in like giving it a hug. A few extra blocks keep the stone in and a collector gobbles it all up.
Yay new episode!!! I sooooooo look forward to your survival videos and its finally out!!!
Scrap mechanic devs: *Made the game a survival game*
Kan: *Turns a survival game to a trucking game*
for scooping up the rocks, use the ramp pieces, that you can take from the rooftop of a warehouse. The rooftop is not part of the warehouse complex, gameplay wise, so you can basically take with you all building blocks, that you can disassemble there.
you should put the potted blooming cactuses on the bottom of the legs for your trailers so they stay in place better
Great build kAN! you should weld your double wishbone suspension vehicle to the back of your trailer and add a bulldozer pushing mechanism to push the stone into your trailer! ;)
Your playstyle is so amazing!
Use the small warehouse ramps at the bottom of the trailer door to make it easier to push the rocks into the trailer... :-)
thats a great idea to go with friends and go mining together!
nice trailer my dude its so cool!
Good job 👍
Maybe the minidozer dont need a picker but the refinery trailer needed one. The minidozer does its job which is to push the rocks. You can create an automatic robot arm to pick up the rocks like garbage trucks pick up massive garbage bins
Always love the new builds in survival mode
Every time, I see you upload I stopped everything I do and I go watch your videos. So many great ideas!
You should of set the Truck up facing your work area so you could of used it's lights
😁
You can get a few of the short ramps from the warehouse roof, to make scaling the door/ramp with the dozer easier.
Thank god you uploaded ive been bored for so long
I made something similar to this in my world cause I hated the whole idea of a full drill/refinery on one vehicle. So, here’s what I found out during my R&D.
1. I made a front end loader that scoops up the rocks by lowering the bucket and the sending out a grapple to pull the rock in as I tilt the bucket. You need the puller to lock the rock into the bucket so you can go faster. But it take practice to know how to position each rock to scoop them.
2. There are 3 tiers of rocks.
Tier 1 - First break, Very Heavy
Tier 2 - 2nd break, Heavy
Tier 3 - Raw rod, medium
This is important to how heavy your loader will need to be to maneuver the rocks around. Remember, this is a front end loader. The goal is to break the node down to the Tier 1 and pick it up and drop it into the grinder. So having enough counter weight is key.
3. I put a drill on the back that runs off 3 bearings and a controller so it is long but, I used the counter weights from the big factories to help with weight. FREE GRINDING!
4. The electric engine is nice as it adds torque to get the bucket under the rocks. I added the small wedges to the front to make teeth so the rocks will roll up much easier. The only problem with this is that when you turn the engine too high it wants to flip when you stop, this is the down flaw to using electric. I wish they would add a low and high mode for this engine. That way you can swap between speed and torque. THIS WOULD BE A GAME CHANGER.
5. I use a 4 wheel triangle shape system to have better handling. The two front wheels are on no suspension and the rear middle/side-by-side wheels have suspension. This helps with taking off and stoping. It prevents it from tilting forward when under a load. And allows for better control with the electric motor.
Feel free to ask any questions, I will try and answer what I can. I will try and upload it to the steam shop so it can be played around with.
My first time here. Great video. Makes me want to play.
Adding to the side door with some sort of scraper that pulls items onto the door and closes the door loading them into the grinder area could work. Then you just need to push the big stone into the collection area near the side door.
How about inserting the rocks from below the trailer? Lika a cage on pistons, that seals the rocks, when you lower it. So you just need to drive over the rocks, or push them below the cage
This was a very fun video to watch
Keep up the good work kan and great video
I think for sure you should build a vehicle to pick up the rocks and put them in the top next!
I haven't watch u for so long and I can't believe you still have ur garage 👍👍
Your dozer may be fine, have it pinch the sides and have the blade raise, perhaps use tires as a grip if the blocks have trouble grabbing.
I'd make something like a hopper with drills at the bottom and resource collectors around them and then a crane gantry that'd pick the whole giant rock of the ground and put it in the grinder.
you should make like an arm that has the drill in it and then you can like pick the rock up and drop it in the trailer :)
A big box that goes over the rocks and then drills down from the top is the most efficient way to mine. The walls keep everything in and the drills crush it. If the whole roof moves you can put collectors and refinery bots on top to collect everything.
Love your videos keep going and never stop
When you make the trailer again you can make the loader on the back of the truck like the caged framers trailer. I would keep the side door as it can be useful in some cases and put a top door on the top
maybe get a downscaled version of the thing you have for the farmers. probably just slap a claw on the crusher trailer and use that to pick up rocks and put them in directly, by cutting a hole out the top.
I built a refinery with a large gantry crane capable of grabbing and lifting those huge bolders that break off into the back of my crusher. Those Big boulders that break off are really heavy and so satisfying to watch it get pushed into my drills and into the refinebot
If you can get the rocks close you could have an arm go out from the trailer, drop down, then pull the rocks into the maw of the beast. Also could double joint the ramp so it folds down flat to the ground.
More! More! More content, kAN!!!
Today I've build double wishbone-suspension car. As I'm totally n00b, your creations are a great tutorial how to do things in this game.
I'd combine the robot arm and the crane trailer approach with this one, making the drills crush vertically
Great vid
Love your videos
Imo the crane idea would be great and would make your trailer awesome, since you could have a more vertical setup = more rocks at once.
what about a crane with the suspension glitch and a big storage in the back, like that you line up with the rocks and with un button it puts it in the storage,
once full you line you up with the trailer and with one button it loads up the trailer .
great stuff, so much ideas now !!! thank you
@Kan Gaming Forget the bulldozer, use an Arm that holds and cuts the stone then lifts it into the trailer.
Thanks , From New Zealand for the content.
If you build a scoop on the bulldozer you might be able to lift rocks over the edge of the grate/door. You'd probably need a heavy counterbalance though
Maybe switch out the door blocks for a couple of ramps so there's no lip to go over, and just make the loading vehicle bigger and heavier, maybe put the grabbers on pistons so you can pinch the rocks and lift them a tiny bit off the ground to move them.
I agree with your second option, replacing your little pusher vehicle. I say you need a Bobcat e85 excavator with the claw-scoop attachment and front plow. You can have the scoop and your drill on the end of the arm and rotate them on the arm to switch which you use. I know the seat is limited in the number of things it can control, but I think you're up to the task of simplifying the controls with timers, sensors, and under-engineering the design.
You should definitely try to make a crane like arm on the back of the trailer to pick up the rocks. You could try to make it with pistons to get additional reach on the arm.
I wish I had cool ideas like this
love your vids been watching since 2018.
Oh dude! I just had a thought. Have a dedicated Tractor for that Trailer, that is the Bucket Loader. Drop the trailer, break the initial rock formation, then dump it all in. While it's processing the stone/metal, move to the next formation. Lather, rinse repeat.
I’ve been waiting to see how you handle this build. I’ve seen everyone else’s and it just ain’t living up to my hopes
Put a piston on the little dozer to give it the ability to pinch the rocks then lift it up like it already does
use a piston to push the side door onto the ground flat, then load all the stones onto that, then close the door to dump all the rocks into the refining trailer and youve got it. alternatively, a crane that can switch between mining mode and pickup mode would be awesome, and to make that work, just make a roof that opens rather than the side. either way, those are my ideas
Love the video and this game. I’m struggling to build things to scale
Finally more of this
Dude. Keep this idea! Just make a better bull dozer type vehicle! I love doing this kind of stuff. Totally not the most efficiant, but hella fun. Maybe make a dozer that can pick up the pieces and dump them from the top into your trailer. It will remove the side door issue. But, then again, you would need to make a much bigger little dozer. I dunno. I know you can make something awesome.
Use cactus blocks on the grabbers because it has the most friction
What this really needs is a big, heavy bulldozer on a second flatbed behind the grinder trailer. For extra bonus points, make the trailer have a ramp for the bulldozer to drive up.
Cool vid bro
Do a crane on the trailer!
Love your vids!🤩🤩🥳
I feel like an idiot not thinking about welding my mining arm to blocks on the ground.
I love the idea, absolutely stealing the concept and building my own 😂
How about borrowing a couple ideas from Alaska gold rush and Squiddy? Use Squiddy's conveyor belt idea and Parker's Frankenstein conveyor idea. Build the conveyor onto the truck so you can load the conveyor and it can load the hopper it doesn't have to be all that big
here some suggestions from me
1. make the trailer using wood, therefore the trailer is less heavy than extruded metal blocks
2. make some kind of crane system the same like farmer cage crane system.
3. attach the drill and crane system to the back of your trailer.
4. it far more convenience, if you can attach drill to the crane system as well
that's all from me...
GREAT CHANNEL..
I been looking alot of mining stuff lately , and the only think i have is a horse shoe shave with 5 dillers and it works like a dream
other scrap mechanics: makes efficient and non-realistic builts
Kan: Most inefficient builts, but realistic.
not scrap man
Second option sounds way better with a driller and a rock collection bucket that can drop it in the refiner. Its just they are so heavy it could glitch a lot with more than a couple in it.
You should carry glowsticks for when you're showing something off on camera and night comes around. Keep up the good content man
Hey kan, have an awesome bulldozer modification idea, make the claw of the bulldozer reach its own back to make it have its own storage area so when its full you can dump it in the refiner
kan is amazing !!!
Change the refinery into a top loader and have a vehicle for gathering the rocks with a crane.
The vehicle could be a front loaded dump truck with a crane and then put a collapsible ramp on the rear. The ramps from the top of a warehouse should be perfect for that.
Or perhaps even better. A small truck that picks up the rocks with a crane. Have the side door move up with a piston. Have the small truck align with the hole in the side of the trailer and just push the rocks in to the side. That way you can have more ground clearance.