Great diy video !! I knew front bumper had to come off, just didn't want to get into something I would regret 😛 It was quite easy actually .. Wife was shocked, she said would take me 3 days 🤣 $275 for the pair of lamps with the bulbs & bout 3 hours, looks great 👍
First thank you for the video it was awesome! So, I followed this video to replace mine on the same vehicle only my blinkers and hazards don't work now. The fuses are good and I even replaced the relay just in case but nothing has helped and there is no noise, nothing. I am at a loss. Any ideas? Thank you again for the detailed video.
I am assuming that they worked prior to replacing the headlight assemblies? If so then I would look at the new parts. Check that the new assemblies actually have the bulbs installed for the turn signals. When I was shopping for mine, some came with bulbs and some did not. Also check that the plugs are fully plugged into the new light assembly, and that you did not accidentally pinch or pull a wire during installation.
There are both in the bumper. There are screws behind the plastic in the front fender wells, and along the top and bottom, and also some plastic push clips along the top and a few on each side of the bottom if I remember correctly.
@@ludercoarms hello the resonator is silver I'm asking about the clear container right up under the pipe on the driver side when you took the bumper off
@@preciousellington780 That is exactly what I am talking about, too. the top of the clear tank, under the driver's side headlight, is hooked into the black plastic air intake pipe going to the inlet of the air filter box. As far as I can tell, it was put there by Toyota as a resonator chamber to reduce the sound of the intake sucking in air. Not the silver exhaust resonator, but an intake noise resonator.
Great diy video !! I knew front bumper had to come off, just didn't want to get into something I would regret 😛 It was quite easy actually .. Wife was shocked, she said would take me 3 days 🤣
$275 for the pair of lamps with the bulbs & bout 3 hours, looks great 👍
Thank you, glad it helped somebody!! Thanks for watching!!
I liked the video. Whats the name of the kit with plastic clips called. It was the white box. Thanks.
Plastic retainer clip kit from Amazon -- www.amazon.com/GOOACC-Retainer-Plastic-Fasteners-Chrysler/dp/B07L6FJGR4/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.9efcc700-d635-445c-9d53-884ea58d759c%3Aamzn1.sym.9efcc700-d635-445c-9d53-884ea58d759c&crid=11OQMMXJQ8F2K&cv_ct_cx=toyota+plastic+push+rivets&keywords=toyota+plastic+push+rivets&pd_rd_i=B07L6FJGR4&pd_rd_r=8b18ccab-5493-4457-9146-6a640be92461&pd_rd_w=Egq8U&pd_rd_wg=9zBy7&pf_rd_p=9efcc700-d635-445c-9d53-884ea58d759c&pf_rd_r=0FK0N20KCWARGM5YRMBC&qid=1685273928&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=toyota+plasic%2Caps%2C93&sr=1-1-2b34d040-5c83-4b7f-ba01-15975dfb8828-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQUxXU0dCN0ZLMDlMJmVuY3J5cHRlZElkPUEwMTIyNTI1MVFYNTVOUU8zMlJDUCZlbmNyeXB0ZWRBZElkPUEwNDgwNTYwM0xBV0U5TjBXUE5ETCZ3aWRnZXROYW1lPXNwX3NlYXJjaF90aGVtYXRpYyZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Milwaukee battery powered ratchet
First thank you for the video it was awesome! So, I followed this video to replace mine on the same vehicle only my blinkers and hazards don't work now. The fuses are good and I even replaced the relay just in case but nothing has helped and there is no noise, nothing. I am at a loss. Any ideas? Thank you again for the detailed video.
I am assuming that they worked prior to replacing the headlight assemblies? If so then I would look at the new parts. Check that the new assemblies actually have the bulbs installed for the turn signals. When I was shopping for mine, some came with bulbs and some did not. Also check that the plugs are fully plugged into the new light assembly, and that you did not accidentally pinch or pull a wire during installation.
Thank you.
Your very welcome, thanks for watching!!
👍❤️🌹🌹🌹🌹🌹🙃 thank you
Also what tool are you using to screw it in on the left side please
That is a battery operated 1/4 inch drive ratchet, A/C Delco brand. Pretty sure I got it from Amazon a few years ago.
Where did you get your replacement lights from? Are they OEM factory replacements? Thanks
I got them from RockAuto.com they are not Toyota parts, but are made to specs by a Toyota supplier.
Hello again i need to know if i need screws or clips im replacing my front bumper on this same truck?
There are both in the bumper. There are screws behind the plastic in the front fender wells, and along the top and bottom, and also some plastic push clips along the top and a few on each side of the bottom if I remember correctly.
Hello what is that clear container right under the the driver side headlight
That is actually part of the air intake piping, I believe it is a resonator to keep the intake from making noise.
@@ludercoarms hello the resonator is silver I'm asking about the clear container right up under the pipe on the driver side when you took the bumper off
@@preciousellington780 That is exactly what I am talking about, too. the top of the clear tank, under the driver's side headlight, is hooked into the black plastic air intake pipe going to the inlet of the air filter box. As far as I can tell, it was put there by Toyota as a resonator chamber to reduce the sound of the intake sucking in air. Not the silver exhaust resonator, but an intake noise resonator.
Ok thanks I was looking for a clear container no one seems to know where I can get it from or what it is God bless
Thank so much so what kind of screws do I need to order I'm replacing the bumper and headlight ?
Plastic POS man made of patience
all the plastic is definitely a pain in the ass!!!