PrssPnt and Ch.Svr | Make Noise
Вставка
- Опубліковано 28 кві 2024
- PrssPnt theme music by Sam!
--
The PrssPnt music synthesizer module is a controller in which several signals are generated by touching the printed copper wire at the bottom of the instrument. Touching PrssPnt, you become part of the circuit, generating a total of four simultaneous signals (two CV, two Gate).
The basic function of PrssPnt will be familiar to anyone who has used Pressure Points or 0-CTRL. It could be seen as a single “souped-up” channel of one of these devices. Since it is a single channel, the tuned voltage outputs are not relevant, and instead are replaced with more playable sensitivity controls and alternate pressure and gate outputs.
• Momentary Gate output remains high as long as it is being pressed
• Toggled Gate output goes high and low with each successive press of the plate: press it to make it go high, press it again to make it go low
• Pressure output generates a positive control signal proportional to the amount of Pressure applied, further tailored by the Sensitivity Panel Control
• Smooth Touch Function recreates the useful patch of sending a Pressure Output through a carefully tuned slew limiter for extended function generation
• Turning up the Slew amount will allow for larger than life functions with very long decay to be generated by hand.
• All four outputs available simultaneously
Specs:
4hp
14mA @+12V
0mA @-12V
30mm depth (incl. power cable)
www.makenoisemusic.com/module...
--
The Ch. Svr music synthesizer module is a small utility module, offering several channels of signal-processing that will be useful in just about any modular system. As a condensation/extension of the sum/offset/attenuversion aspects of MATHS, it continues the great tradition of sculpting the control signals we use to sculpt our sound signals.
• Scale, amplify, attenuate, or invert an incoming signal using Channels 1 or 2
• Generate DC offsets when Channel 1 or 2 is unpatched
• Crossfade between two signals, or attenuate one signal, using Channel 3
• SUM and INVerted Sum Bus for addition, subtraction, mirroring, inversion etc.
• Individual Channel Outputs for Channels 1 and 2 allow independent use of all three channels
• Anywhere you need more subtle modulation, Ch. Svr is there for you… now all your eurorack slivers may have subtle and intentional modulation they deserve!
Specs:
6hp
20mA @+12V
10mA @-12V
30mm depth (incl. power cable)
www.makenoisemusic.com/module... - Розваги
I've been using a Ch. Svr for a couple weeks and it has already saved at least 22 MATHS channels.
🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️🎛️
It's not fair. You could have saved Walker even before he vanished.
Nice to see Make Noise focusing a bit more on utilities lately. Cheers!
Really unique and intuitive! I appreciate no nonsense modules like these.
🎶⚡️
NEED NEED NEED! Always wanted modular PressurePoints channels. 😁
Two Prss, one on either side of my Maths & a Ch.Svr to process the three will be an incredible value (financially & in real estate!) - and they're priced right to boot. 🤤
This video is wonderful
MOTS in Philly yesterday, new make noise modules today, life is good
Love the channel saver really great module!
Thanks! Hope you enjoy it :)
These are sweet! Prsspnt looks like it’ll get added to the list as having that many outs of a single gesture would be awesome!
✴!✴! Congrats on a great release day. These are both so sweet. I'm a Pressure Points freak and it looks like you have really perfected the concept by adding a slew circuit? Wow! My head is exploding. I see a single pad for Morphagene etc. in my future wuwhahah.
Hope you will enjoy it!!
Very cool!!
Thanks Trovarsi!! ⚡️🎶
@@MAKEN0ISEMUSIC Will I see you at Superbooth again this year? 😀
prsspnt is the module i needed 🥵
The press for high gate again for low gate output on the PrssPnt would pair well with an AND logic module for dynamic modulation manipulation and muting.
Great idea! Also, fyi you can use a VCA to simulate AND logic in a pinch! :)
Looking forward to my PRESS PINT!
What great tech, I need a make noise setup!!!!!
⚡️🎶
handy stuff!
👆
Nice 😎
soundhack ster(b)eo-verb?
that would be awesome
waiting for this one
I’m guessing it’s stereo successor will finally be announced, sometime after the final Erbe-Verb run starts shipping out next month. 😉🔥
@@na-dj6ob that would be sweet but i honestly believe it will be a while until we see it, usually there are a few years between soundhack modules
I hope it’s a Morphagene in semi modular form 😂 to accompany my 0coast, cntrl, & strega ! 😊
Nice one guys; very tasty.😃👍🏻👍🏻
thanks!
niceeeee
Smart modules! Do I need them with 2 Pressure Points and a 0-Control?
Make a nice little keyboard, with a few of these 🎹😀
Remember fellas, this kind of simple, small, un-sexy utility modules is what makes modular systems fly, don't sleep on these!
is it possible to ring modulate with ch svr?
no, because the channels are not voltage controlled
You sick people, you just gotta have my money arent you
Get it then, gettttt iiiitttttt
Haha😂
When will the PrssPnt be released?
It’s released now! Shipping this week
@@MAKEN0ISEMUSIC oh really, nice! I can’t find where to order it. I’ll have another look :)
@@MAKEN0ISEMUSIC is it available in UK yet?
@@advaita9156 We have shipped orders to our UK dealers!
@@MAKEN0ISEMUSIC niiiiice. I’ll get one soon in that case :) will be a nice little addition to my small system
Very cool but it would have been handy if it recorded the cv, as it is I'll stick with my bela gliss 4hp
Yeah, but now Walker is fading in and out and toggling. This is not really helping him. I hope he'll back like Schwarzenegger on Wednesday.
"A simple expressive finger"🖕 jk 🤣🤣🤣 This is a dope module!!
YES Xcwllent! i have just the 4hp for Ch Svr that remainibg in the 4zone lol can you guess where?! SAVED by MNgenius. Already have a 0-Ctrl so Ch Svr is Perfect 4 me