KitchenAid Dishwasher Repair - How to replace the Door Latch

Поділитися
Вставка
  • Опубліковано 21 лип 2024
  • Need help replacing the Door Latch (Part 8193830 ) in your KitchenAid Dishwasher? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
    Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
    Fix Part Number: FIX886294
    OEM Part Number: 8193830
    Why you might need to replace the Door Latch:
    Dishwasher will not start
    Door will not close properly
    What tools you need for this repair:
    #15 Torx Bit
    3/16ths Nut Driver
    Needle Nose Pliers
    The information in this video is specific to KitchenAid, Kenmore, Whirlpool. To find a Door Latch specific to your model, visit www.fix.com
    Not what you’re looking for? For more dishwasher help click here: www.fix.com/parts/appliance/d...
    Where you can buy this part:
    www.fix.com/parts/dishwasher/...
    Connect With Us!
    / fixdotcom
    / fixdotcom
    plus.google.com/+fixdotcom
    / fix.com
    Visit our blog: www.fix.com/blog/
    Don’t forget to comment below and subscribe to our channel!
  • Навчання та стиль

КОМЕНТАРІ • 13

  • @aaronmelgozaii1920
    @aaronmelgozaii1920 4 роки тому

    Thank you! Fixed the problem with the dishwasher not staying shut during wash.

  • @timc3639
    @timc3639 3 роки тому

    thank you for this comprehensive post.. seems ridiculous that it was designed this way tho!

  • @gomez571
    @gomez571 3 роки тому

    Tried this, but on my model the latch is connected to the door. When unscrewed it disconnected and shifted which pulled the ribbon from the front control panel which cannot be reconnected. New dishwasher will have to be purchased as I see no fixes for this on UA-cam.

  • @SWessy88
    @SWessy88 4 роки тому

    KitchenAid model KUDS02FRSS2 door latch releases when heat/steam builds up. I've replaced both latch and striker but problem persists. If I use a pole to wedge door closed it runs through cycle no problem. Seems to be venting at least at end cycle. What am I missing?

  • @dealman3312
    @dealman3312 3 роки тому

    What was wrong with the latch in the first place? I can’t figure out if I need the latch or the striker. Both don’t appear to be visibly broken

  • @naheedkamal1619
    @naheedkamal1619 2 роки тому

    Hi, please recommend some one to replace my door latch of kitchenaid dishwasher. I am in Milton, Ontario. Thanks

  • @queenreginarice
    @queenreginarice 3 роки тому

    How can I tell if I need to replace the part or not. I took every apart but the latch does not look broken.

  • @ironwill04
    @ironwill04 5 років тому +3

    Why did the latch need to be replaced? I have a kitchaid with the same latch but it only has one switch. The door wont stay closed, but nothibg looks broken in the latch

    • @queenreginarice
      @queenreginarice 3 роки тому

      Did you get an answer to your question? I have the same issue. My latch looks like it's not broken. I'm just looking for an answer. Thank.

  • @skrappackkennels3429
    @skrappackkennels3429 3 роки тому

    Changing the latch did not work for me