Cool CUFF Bracelet Making - NO Solder - In My Workshop

Making this cool Cuff Bracelet in my workshop - The Process:
From the a used piece of Copper pipe a had in my workshop, I started by hammer the copper pipe until it was almost flat. Before, I measured up 1 cm from the ends of the pipe and sawed a 1 cm crack at each end. When hammering, I avoided making these ends flat so that I could later use these as nice endings for the ends of a braided silver bracelet.
Once the copper pipe was hammered flat, I heated it up so it was easy to shape and then hammered it into the shape of a Cuff Barcelet. Then I use my jeweler saw to saw off the top layer of the copper tube - approx. 2 mm. from each edge.
I cleaned soot and impurities from the shaped copper Cuff bracelet using sulfuric acid. To make the copper part ready for the braided silver Cuff later, I polished it up nicely - Great result, I think..!!
I pulled the silver wires up from my Silver Deer - and cut it into 6 equal lengths of silver wire.
I then braided the 6 silver wires into a silver braid - it was hard work because each silver wire was 3mm. thick and it was hard to get it nice looking - even though I had heated the silver wires beforehand to make them softer. But it worked out fine in the end and I hammered the silver bracelet on all edges, so it turned into a really nice and assembled silver cuff bracelet it self. I hand sanded the silver cuff with a file into the right shape.
I hammered the cuff bracelet around my bracelet wooden stick and made the ends nice. It was difficult to get the cuff to fit perfectly into the copper bracelet that I had made earlier, but I think the result ended up nice.
When the cuff bracelet were tapped in the right shape and the ends were done correctly, I bent it, so that it could fit my wrist.
Finally, I polished the silver cuff bracelet with my multi sander, so both the the copper cuff bracelet and the silver cuff bracelet became a homogeneous and awesome cuff bracelet.
Used Tools:
I only used a hammer, a couple of screwdrivers, 2 Pliers, file and a multi-sander - and lots of sandpaper. So anyone can make this Cool Cuff Bracelet if they want.
I think the final result is awesome - this is not the last piece of homemade jewelery I´ll make..!!
Please give me your feedback in the comment section, if you like - I will be happe to hear you out, so I can make new great videos in the near future.
Chapters:
0:00 Intro
0:14 Starting to measure up, cut and tap the copper pipe
1:07 Heating, cooling, fine sawing and shaping the copper pipe
2:28 Peeling of the copper pipe
3:02 Making and shaping a small copper Dog
3:50 Extraction of silver wires, heating and braiding of silver Cuff
5:07 Hammering and Shaping the Silver Cuff
5:45 Completion of the copper lower part for the Cuff bracelet
6:41 Presentation of the copper dog
6:54 Completion of the Silver top Cuff Bracelet
8:22 Here, the copper and silver parts are assembled into a complete Cuff Bracelet
8:52 The awesome cool Cuff Bracelet is finished - see the result.

[@user-ct4py9xe2l]

Fantastic ! Thank you.

[@my-projects]

Thanks..!

[@andreguilles4919]

Great artisr!

[@my-projects]

Thanks a lot 😊

[@nicolehill4812]

I have never seen something made like this. Simply beautiful technique. Simply beautiful cuff.

[@my-projects]

Thank you very much for your lovely feedback 😊 - I really appreciate it👍👌

[@user-qt8yb5ov7d]

Перевод на русскии

[@dr.froghopper6711]

Copper, brass, steel and Sterling Silver are my favorite metals to work with

[@my-projects]

I agree 👍 these materials are quite nice to work with.

[@helenw1497]

好美啊🎉🎉🎉🎉🎉🎉🎉

[@my-projects]

非常感谢 😀🤩

[@customcraft1]

The result is beautiful, I would love to see more of your jewelry work.

[@my-projects]

Thanks a lot for your lovely feedback 😊

[@HayatiLatifa]

I'm impressed! The cuff is so beautifully professionally done. I love how nice clean organized working place you have. Absolutely inspiring.

[@my-projects]

Thanks a lot, Mom Dot Co 😊- and great to hear your nice feedback 👍

[@user-ro4je7yh9l]

شاهدت أناس كثيره تعلم هذا الفن ولكن انت مختلف جدا عنهم تمتاز بالهدوء والدقة ومراعاة التفاصيل والصبر على المعدن
I have seen many people learning this art, but you are very different from them. You are characterized by calmness, precision, attention to detail, and patience with the preparer❤

[@my-projects]

Thanks a lot for your very kind feedback

[@aumi.jewels]

That bracelet was a lot of work but you did a fabulous job… thanks, Michelle

[@my-projects]

Thanks a lot, Michelle ❤️

[@danien1238]

The end result was absolutely amazing! Love your editing also, good entertainment! Looking forward to more.

[@my-projects]

Thanks a lot for your great feedback ..👍😊

[@Lecon60]

I'm a silversmith. Awesome. Now I know how I'll finish my cane.

[@Lecon60]

Thank you

[@my-projects]

Thanks a lot, Lecon 😊👍

[@pattyanderson1199]

Amazing. Especially the water vase trick..lol..

[@my-projects]

Thanks, Patty 👍

[@Remarkable785]

Hammer. Super schön freut mich das gefunden zu Haben.

[@my-projects]

Vielen Dank 😊👍

[@hamedderiis8553]

All the details of the video are beautiful, thank you

[@my-projects]

Thank you for your awesome feedback 😊👍

[@evieshore3270]

Just wow , crazy beautiful work !

[@my-projects]

Thanks a lot 👍😊

[@user-ro4je7yh9l]

How I wish I could learn this art from your hands ❤

[@my-projects]

Thank you so much 😀

[@seborojo1]

Impressive and beautiful. A real piece of art. Congratulations 👏

[@my-projects]

Thanks a lot for your nive feedback 😊👍

[@davidt1621]

Your Silver Deer reminds me of the Golden Egg Laying Goose. Although.. geese actually do lay eggs, but I've never seen a deer do whatever it is that your Silver Deer does.

[@my-projects]

Thanks for noticing 👍 The Deer was just meant as an "easter egg" - an unexpected feature in the video 😉

[@user-kw6cr3wu9k]

Кайф

[@my-projects]

Thanks..!😊👍

[@shellyw9013]

Wow!! That is a gorgeous piece of jewelry!!!

[@my-projects]

Thanks a lot 😊

[@songbird60thompson14]

Amazing piece’s! Extremely creative and talented! You’ve made such a cool and inspiring workshop too.

[@my-projects]

Thank you very much 😊 - I am overwhelmed by your lovelyfeedback - THANKS..!!👍

[@songbird60thompson14]

Sweet. You’re welcome!

[@reneethompson6410]

Wow! That is so amazingly beautiful! I am impressed beyond words! I like the cat too! Very clever!

[@my-projects]

Big Thanks, Renee 😊👍 I love cats..

[@livinlifewithluke3534]

LOVE, LOVE, LOVE.. You are hilarious in your presentation too. Well done! Beautiful art!

[@my-projects]

Thanks a lot Luke! 😉😄👍

[@user-ro4je7yh9l]

واو كم أتمني أن أتعلم هذا الفن علي يديك Every second and you are fine❤🎉

[@my-projects]

Thank you 😀

[@EnriquetaCascante-qp9jb]

Me encanta pulseras

[@my-projects]

Thanks 👍

[@DarnellHorton-ze7yh]

Fantastic Artwork 🎉🎉🎉

[@my-projects]

Thanks a lot😊👍

[@user-ro4je7yh9l]

واو كم أتمني أن أتعلم هذا الفن علي يديك ❤🎉

[@my-projects]

Thanks a lot ;-) Maybe you can learn it by watching my videos? Big thanks again.

[@fortinoquijadateran7041]

Gracias. Excelente trabajo.

[@my-projects]

Muchas gracias 😊

[@archievthapa3593]

Mind blowing talent !!! subscribed

[@my-projects]

Thanks.!!😊👍

[@dacofar9610]

awesome work

[@my-projects]

Thanks a lot 👍😉

[@sylviayahalom8041]

I love watching you creat. I have never seen such clean work and area, you inspired me to clean up. Just beautiful!

[@my-projects]

Thanks a lot Sylvia - that was lovely feedback 😊

[@Welder_99]

Terimakasih atas video nya ,

[@my-projects]

Thanks 👍

[@shellaluo709]

So cool,nice job and funny soul

[@my-projects]

Thank you very much for your nice feedback.

[@stevanasanders7520]

Beautiful

[@my-projects]

Thank you 😊👍

[@Frigger20]

Excellent video - you provided an answer on several things I was wondering about and the video is visually pleasing. Real eye candy ! Keep ‘m coming !

[@my-projects]

Thank you very much 😊 - I really appreciate your great feedback 👍

[@9Sept]

Great craftsmanship

[@my-projects]

Thanks a lot 😊👍

[@tomaszjanuszewski1223]

It looks beautiful. Good job👍

[@my-projects]

Thanks a lot..! 😊👌

[@offbeatmusicstudio5004]

Subscribed man. Hope we will see some more cool stuff in future.

[@my-projects]

Thanks mate 👍 you will ..!

[@feliperamirez7079]

Beautiful video, beautiful Job 👏

[@my-projects]

Thanks a lot, felipe 😊👍

[@DavidHernandez-zb7ob]

Wow!

[@my-projects]

Thanks David 👍

[@fortinoquijadateran7041]

TU INGENIO, TU TRABAJO, TU DESTREZA; SON INCREÍBLES. ÉRES UN GRAN ARTISTA. VÉNDEME UN BRAZALETE DE COBRE!!!

[@my-projects]

Muchas gracias por tus comentarios, que realmente aprecio! Lamentablemente mis proyectos no están a la venta. ;-)

[@user-wb8jv4lo5h]

COOL!!! AWESOME☆

[@my-projects]

Thanks.! 😊👍

[@skiprogers9766]

Very inspirational. Thank you for sharing your skill.

[@my-projects]

Thank you very much - I appreciate your feedback 😊👍

[@michaelhansen6977]

Very cool idea.

[@my-projects]

Thanks..! 😊👍

[@jefflarson7375]

Great work!! Thank you for showing your art work it's amazing

[@my-projects]

Thanks a lot for your great feedback! 👍😊 I really appreciate it.😉

[@debsullivan7654]

Nicely done!

[@my-projects]

Thanks a lot Deb 😉👍

[@sandragusmao7778]

Muito lindo seu trabalho.

[@my-projects]

Muito obrigado, Sandra 👍😊

[@bhamjoe]

Beautiful video, and new sub here. I like that you use tools most people could have or get cheaply. Awesome work!

[@my-projects]

Thanks a lot Joseph, for your nice feedback and support 😉👍

[@beauford731]

Interesting, I would say a very unique approach to what you were wanting to accomplish. Well done though, it looks great 👍

[@my-projects]

Thank you very much for your feedback 👍 - yes - I tried to achieve a nice result - but with a different approach. 😊

[@Nomad_Paws]

Wooow! Amazing work! Congrats! Thnk you for taking the time to do this awesome tutorial and to share you knowledge with us!

[@my-projects]

Thank you very much 😊 I really appreciate your nice feedback 👍👌

[@clinttorres2508]

Really nice work, beautiful copper wrist band..subscribed 👍

[@my-projects]

Thanks a lot, John 😉👍

[@vinodjaylal4493]

Love it

[@my-projects]

Thanks a lot 👍

[@sampaionathania]

I want to gift my brother with copper jewelry so he can wear at his wedding. I have 8 gauge wire and I’m not sure where to find tools to help me with bending the copper. I see that you used a wooden cylinder object to bend, can I find that at Home Depot? And I also want to know the name of the table top tool you were using at 3:35. Thank you so much

[@my-projects]

It's a seriously big gauge size- Nice!! you can buy a bending mandrel on Etsy - I hope it will be a success. And the table tool at 3:35 is a small table anvil of 5 kg - best of luch 👏👍

[@flogrownpropertymaintenanc8221]

Question can I just brush salt water in n copper to get that patina? I’m new !?

[@my-projects]

yes salt water and vinegar 😉👍

[@aderianolopez8839]

wow Bravo

[@my-projects]

Thank you 😊

[@marilinaprisco7536]

Fantastico!🤩

[@my-projects]

Thanks..! 😊👍

[@helenw1497]

艺术片啊🎉🎉🎉❤感谢分享

[@my-projects]

欢迎 - 很高兴你喜欢这部电影 😀❤👍

[@helenw1497]

@@my-projects超级赞❤❤❤

[@jewellerydesignerartists9353]

Great work process 👍
New video upload i am waiting

[@my-projects]

Thank you! Cheers! 👌

[@nataly9188]

Top demais

[@my-projects]

Thanks..! :-D

[@johnrichards2518]

I think it is a good project, you make it look easy but It probably isn't. Keep up the good work. Maybe you could make easier projects for us beginners and more detail on how you did it. Thank you

[@my-projects]

Thanks a lot 😊 👍 Good idea..! I'm working on a few other videos, but after those, I'll look into it. Maybe you have a suggestion..?

[@jessesanchez9893]

I saw video and know it ALLOT of work...How much would you sale or price one at???

[@my-projects]

Thanks a lot 👍 Yes - there’s a lot of work in this Cuff Bracelet - it’s not for sale, but I would price it for aprox. $350 because I used a lot of clean silver.

[@pattyallison1108]

LOVE IT!! very creative your filming makes me laugh!! I have to know how you got so much wire from the deer LOL, was that real siver?

[@my-projects]

Thanks a lot, Patty, for your lovely feedback 😊 I made a Hole in the wodden plate belov the deer and then have my roll of silver wire lying underneath . The deer is a silver wine cork by the way😁👍

[@joesask857]

nice

[@my-projects]

😊👍

[@mangio9058]

It's really amazing what you can do. Are taking orders?

[@my-projects]

Thanks a lot, I appreciate your feedback 👍 - No, unfortunately I don't make items you can order 😊

[@jeffersonlisboa7705]

Uau

[@my-projects]

Thanks 😊👍

[@Sepehr_305]

Wow shet 😂

[@my-projects]

Thanks..! :-D

[@johnrichards2518]

Thought the bracelet was very cool. What size wire did you use? It would be helpful if you talked your way through the video so we could know how long this took,, what size wire etc. Thanks will subscribe.

[@my-projects]

Thank you for your nice feedback. ;-) Very good point..! I have previously considered talking my way through my videos - maybe I may do so in my next videos. I used 3mm silver wire and a 12 x 1.0mm copper tube in this video.

[@dhduncan]

Is the 1 mm or the diameter of the tubing or the wall thickness?

[@my-projects]

@@dhduncan 12mm is the diameter - and 1mm is the wall thickness 👍

[@user-dc1ko9fl6u]

КЛАСНО У ВАС БРОСЛЕТ, А ПРОДАЕТЕ ДА?

[@my-projects]

Еще раз большое спасибо за ваш прекрасный отзыв - нет, к сожалению, я его не продаю - это был подарок для друга. 😊👍

[@user-dc1ko9fl6u]

@@my-projects А вы где дивете?

[@my-projects]

@@user-dc1ko9fl6u Дания - спасибо
👍

[@user-dc1ko9fl6u]

@@my-projects ДАВАЙТЕ БУДЕМ ДРУЖИТ?

[@user-dc1ko9fl6u]

@@my-projects ДАВАЙТЕ МЫ ТОЖЕ БУДЕМ ДРУЖИТ

[@ruthannlangley3258]

What gage is that wire

[@my-projects]

This silver wire is 3,0 mm - pretty massive 👍

[@richardparry1966]

No craftsman, EVER uses a precision instrument for scoring metal. Use the proper tool, odd leg calipers😲😲 very poor.

[@my-projects]

Thanks for your feedback, Richard Parry

[@HeadsUP253]

Is that real silver on copper? Where can i buy those silver wires

[@my-projects]

I made them from a old silver spoon - but you can buy them on this webshop (Danish) www.smyks.dk ( 3mm) 👍😉

[@HeadsUP253]

So satisfying to watch you turn that piece of copper pipe and 6 silver rods into awesome lifetime bracelet!

[@my-projects]

Thanks a lot, friend 😊😉