Great job brotha, yeah do a video on head gasket replacement video doesn't matter if there other channels that already has videos on it. It's content for your channel and help out grow keep up the great work. I wouldn't recommend changing to 1zz injectors just yet until you've done a few more mods if you do it now with only a throttle body swap your car will be running too rich
great video arvin!!, definitely would love head gasket replacement video and when you replace ur injectors with 1zz. Please make a comparison type video( before and after replacement). Keep it up!!
Yes, please do a video on head gasket change. I enjoy watching your videos. Thinking about going the throttle body change to my Yaris as well. I know the hill since I live in wahiawa
Hello, greetings from Chile, I love everything you do with your Toyota. I have one of the same, but in Latin America it is more difficult to find aftermarker parts... Highlighting the perfect fit of the induction that you installed turned out great... I would love to have one like this... Have you thought about putting a turbo charger on it... Well, if you do, I will be one of the first to replicate that in my yaris... Greetings and blessings, I love the content you upload, especially if it is modified for the car ✌️💪
Thanks! I have not considered putting a turbo or supercharger in my car yet but if the opportunity does come up I may pursue it. I'm happy with where the car is right now but you never know.
There's a fix for where the clamp on the filter hits the heat shield. 1) Remove the filter 2) Measure the circumference of the hole in the heat shield 3) Cut a length of rubber hose a little longer of the circumference. Slice into the hose (hot dog style; don't make another cut) the full length of the hose. Make an 'O' into a 'C'. 3) Fit the sliced end over the hole on the heatshield. 4) You may need to trim the ends to fit perfectly. 5) Once you have the right length and both ends fit together, fix it into place (maybe with a glue or epoxy. If you want to replace this hose in 10 years, you may wish to not glue it but somehow clamp it on). Fuel hose will work well since they withstand engines bay temperatures. 6) If the clamp hits the rubber hose, both the sound and vibration are dampened. The bigger the hose, the bigger the gap it can fill.
Hey dude, I have the same car as you (mine is a 2NZ-FE), do you have an issue in first gear (I know you have an automatic) when releasing the clutch the rpm dips and the car shudders as if its going to stall?
@@effiimmad3857 You want to put a Corolla engine in the Yaris? Depending on the engine, the mounts might not line up, thefefore you would need custom work to make it work in addition to all the other connections for the engine
I think what you were pointing at as being the oil seeping past the 'head gasket' is actually the rocker or valve cover gasket. This is an easy fix.
Yes you are correct, don't know why I was saying head gasket 🤣
I did the same upgrade you did and so far no issues couple months later.... Thanks for the videos!!!
Great job brotha, yeah do a video on head gasket replacement video doesn't matter if there other channels that already has videos on it. It's content for your channel and help out grow keep up the great work. I wouldn't recommend changing to 1zz injectors just yet until you've done a few more mods if you do it now with only a throttle body swap your car will be running too rich
great video arvin!!, definitely would love head gasket replacement video and when you replace ur injectors with 1zz. Please make a comparison type video( before and after replacement). Keep it up!!
Yes, please do a video on head gasket change. I enjoy watching your videos. Thinking about going the throttle body change to my Yaris as well. I know the hill since I live in wahiawa
This is an old one but I was wondering if the consumption got better worse and the same?
Could you send the link of this app 😊
OBD Link MX+
Can you do a video of your radio screen
I recently did an mic install for my radio and I briefly go over my radio in that video so lookout for that!
Hello, greetings from Chile, I love everything you do with your Toyota. I have one of the same, but in Latin America it is more difficult to find aftermarker parts... Highlighting the perfect fit of the induction that you installed turned out great... I would love to have one like this... Have you thought about putting a turbo charger on it... Well, if you do, I will be one of the first to replicate that in my yaris... Greetings and blessings, I love the content you upload, especially if it is modified for the car ✌️💪
Thanks! I have not considered putting a turbo or supercharger in my car yet but if the opportunity does come up I may pursue it. I'm happy with where the car is right now but you never know.
Has anyone tried corolla/ celica Leather steering wheel w airbag on this car?
There's a fix for where the clamp on the filter hits the heat shield. 1) Remove the filter 2) Measure the circumference of the hole in the heat shield 3) Cut a length of rubber hose a little longer of the circumference. Slice into the hose (hot dog style; don't make another cut) the full length of the hose. Make an 'O' into a 'C'. 3) Fit the sliced end over the hole on the heatshield. 4) You may need to trim the ends to fit perfectly. 5) Once you have the right length and both ends fit together, fix it into place (maybe with a glue or epoxy. If you want to replace this hose in 10 years, you may wish to not glue it but somehow clamp it on). Fuel hose will work well since they withstand engines bay temperatures. 6) If the clamp hits the rubber hose, both the sound and vibration are dampened. The bigger the hose, the bigger the gap it can fill.
Thanks for the suggestion!
I have one question I have swap my car with gas i can do this swap?
Hi my friend good videos i hav a question the part number of trottle body is important or not for the swap? i apreciate thanks
I mentioned the different part numbers in my initial throttle body installation video around the 9 minute mark
Brilliant work! I am wondering if you kept the stock manifold gasket? Some folks report it not being the best fit with the 1ZZ tb. Cheers!
Replaced the manifold gasket with the same OEM version. Haven't had an issue so far
Hey dude, I have the same car as you (mine is a 2NZ-FE), do you have an issue in first gear (I know you have an automatic) when releasing the clutch the rpm dips and the car shudders as if its going to stall?
hows about fuel consumption?
At the 1:53 mark, I calculated my MPG and so far it has remained the same, hasn't gone down much
Which obd app are you using? Can you provide a link?
OBDLink MX+
Can we swap Yaris engine into corolla engine 1.8 please let me knw!! Thank u
@@effiimmad3857 You want to put a Corolla engine in the Yaris? Depending on the engine, the mounts might not line up, thefefore you would need custom work to make it work in addition to all the other connections for the engine
What intake are you using my friend. I'm from Canada cheers
K&N cold air intake
@@arvin_arn from the Corolla 1.8L ? Any link?
Add on throttle body spacer bro. Feels more better on idle rpm and throttle response.
I've never been able to find someone who sells them. I would have to go custom for that
@@arvin_arn what airflow sensor you use arvin?
@@pengukurjalan still running the stock MAF sensor
@@arvin_arn i see.. have you heard about zl01 maf sensor?
@@pengukurjalan what is the zl01 maf sensor?
8 bars 42 litres ? Mine is 8 bars 42 litres .I have a yaris too.But equipped with a 1299cc 2NZFE Engine .Manual.
🤔