Our Roman Clay is a water-based decorative wall finish. It is not waterproof or stain proof, so use in a shower or anywhere it will have contact with water is not recommended.
Great demonstration !....especially on this flimsy board. This technique is so much easier on a real wall. I'd like to add a bit of advice for DIYers, take a metal file and round off the sharp tips on the spatula corners as it'll make doing this kind of random movement technique a lot easier to accomplish.
I just finished the first coat on my fireplace! I called Portola and spoke with an employee, as long as it is not in the main area of the fire (like inside the space around a wood burning fireplace) it should be fine. I installed a gas fireplace and sheet-rocked around it, and they said it shouldn’t be a problem. Guessing you already moved forward but thought I’d share!
We see a lot of Roman Clay fireplaces! It is a water-based plaster finish that is non-combustibles, so as long as the application is at least six inches from the firebox and steps are taken to ensure proper application, this should be fine. Roman Clay should be applied to smooth, level 5 drywall surfaces, so if the fireplace surround is textured or stone, it may take a little preparation before you can begin application. For more information please contact our support team at (323) 655-2211.
Thanks for the video- very clear explanation. Based on what you did here, it looks like application time is roughly 20 sf/hr? Would you say that is accurate?
Make sure you skimcoat your surface to a level 5 finish and seal the drywall compound with a primer. Call Portola to find out what the best primer they recommend. Make sure your walls are perfectly smooth as any imperfection with show through the roman clay.
We recommend priming with a water-based stain blocking primer first. A good all purpose primer, like our All Purpose Base Coat is great, or you can pick one up from your local paint store.
Each coat of Roman Clay consists of multiple thin overlapping layers. You want to get about about 60%-70% coverage in the first coat. After allowing the Roman Clay to dry for 2-4 hours, lightly sand and wipe off any excess residue with a clean rag, and then begin your second coat.
Our Roman Clay is a two coat application, but each coat is multiple overlapping layers. You should get full color coverage over any primer with the two coats, but you can use an Ultra Flat paint match in the same color (like In The Navy) to make the application a little easier.
Does the surface has to be completely flat? Or can you apply over the orange peel texture many SoCal homes have? Or will the clay fill the texture to create the flat, Venetian plaster, look? I saw the comments regarding matte priming the surface but more worried about applying over a textured wall.
Roman Clay is best applied over smooth surfaces. Any texture such as orange peel or knockdown are going to cause difficulties in application. A little roller nap texture is usually okay. In some cases priming the wall in the same color matched in our acrylic paint can help if there is a little texture. Definitely put on a skim coat prior to applying the Roman Clay.
@@sharabshah7823 It's ready to be sealed as soon as the last coat is dry. Usually around an hour or two after the last coat. You can seal it at any time after, there's no rush.
Ideally, Roman Clay should be applied to super smooth, level 5-drywall surfaces. Roman Clay is applied in very thin, overlapping layers, so cracking isn't normally an issue unless the substrate cracks. If the fiberglass flexes with movement it may cause a problem. We definitely recommend sampling and testing it out on the surface before deciding if it works for you! For more information please contact our support team at (323) 655-2211.
I wouldn't recommend doing this however we've had people paint their tile (especially if this is for decoration purposes; ideally not a surface that's high-traffic). So feel free to give this a shot if you'd like however we don't recommend because you might experience issues with adhesion.
Me too. I’m thinking about applying it with a rag and going over it with the knife. It was very hard to fully cover the wall with even a little texture. This video is a completely smooth surface.
@@grocerylist no it just is how you use it. No different than any other product,you need to learn how to use it. Put excess joint compound on your blade ,same results. When doing fine finish some thin that same joint compound,gets “drippy” . You have to put smaller amounts on at a time. It’s you not the product
Hi there, Yes Roman Clay is actually the recommended finish to use in bathrooms. It's actually a lot more forgiving in the long run and a lot more easier to touch up. I recommend sealing the bathroom with our Roman Clay Topcoat. It will add a slight sheen to the finish but it's kind of like an Eggshell level of sheen which ranges between 4-8%. Feel free to reach back out to us on info@portolapaints.com if there are any other questions or concerns. Best, Katrina
You can apply Roman Clay over most matte paint, or any matte primer - primer is usually suggested! The main thing is to have the walls be as smooth as possible :)
You should give them a call. They're great and answered all my questions. I'm applying this to my range hood as well but it's finished off with sheetrock.
applying with a 6" knife on a chalk board size piece doesn't give you the gist of it when you're doing walls and ceilings; quick process? are you kidding? my client wants all their walls and ceilings done with this clay finish
Hello, I'm looking for a master of this trade for a future project in the Orange County area (Southern California). If you can please message me, thank you!
Roman Clay is for interior use only, so exposure to most interior temperatures should be just fine. As Roman Clay is water-based, it should not be applied below 50 degrees Fahrenheit, or allowed to freeze when wet as it will effect the viability of the product.
is this able to be used as a shower wall? so occasional water contact for short periods of time?
No.
Our Roman Clay is a water-based decorative wall finish. It is not waterproof or stain proof, so use in a shower or anywhere it will have contact with water is not recommended.
Great demonstration !....especially on this flimsy board. This technique is so much easier on a real wall. I'd like to add a bit of advice for DIYers, take a metal file and round off the sharp tips on the spatula corners as it'll make doing this kind of random movement technique a lot easier to accomplish.
These videos are great. As a new homeowner with a million ideas watching these I feel like I could do this or the lime paint.
Being in the trades it's fun watching a master of another.
Can you do a video on how to apply roman clay to rounded/curved edges?
We will add it to the list! Pro Tip: Bondo knives are a great tool for curved surfaces.
I was thinking of using this around my fireplace. Is it heat resistant?
I'm wondering the same thing..and if not, would a mantle help buffer the heat so the tv won't get too hot?
I just finished the first coat on my fireplace! I called Portola and spoke with an employee, as long as it is not in the main area of the fire (like inside the space around a wood burning fireplace) it should be fine. I installed a gas fireplace and sheet-rocked around it, and they said it shouldn’t be a problem. Guessing you already moved forward but thought I’d share!
We see a lot of Roman Clay fireplaces! It is a water-based plaster finish that is non-combustibles, so as long as the application is at least six inches from the firebox and steps are taken to ensure proper application, this should be fine. Roman Clay should be applied to smooth, level 5 drywall surfaces, so if the fireplace surround is textured or stone, it may take a little preparation before you can begin application. For more information please contact our support team at (323) 655-2211.
Can you apply this directly to already painted walls? My walls have some texture that I dislike. Do I need to sand it all or can it cover it ?
You need to prep your wall, no gloss and prime then apply.
No not recommended cause you will spend more money better prime or cover your walls with topping versus spending much product to fixed your walls
Thanks for the video- very clear explanation. Based on what you did here, it looks like application time is roughly 20 sf/hr? Would you say that is accurate?
would be nice if there would answer
A plaster Aplicator like my self is roughly 400 sq ft per day first and second coats final coats is less
@@jessicahowitt6016 yeah it looks like they’re not answering any questions…bummer
Do you need to prep before applying to avoid cracking? How easy is the plaster to remove from wall?
Make sure you skimcoat your surface to a level 5 finish and seal the drywall compound with a primer. Call Portola to find out what the best primer they recommend. Make sure your walls are perfectly smooth as any imperfection with show through the roman clay.
Love this but I imagine it would take me forever to complete one room. Anything similar that can be painted on with roller?
You dont have to do a whole room. For I think it will be too much. Doing one wall would be great too
What color is this one? I dig it... it's the suede look my mother has been after for years. Thank you xoxo
This is Roman Clay in the color "Sasha"!
What is the color of the clay used in this video?
This is "Sasha" Roman Clay!
Can i use a 12 inch blade to do the work?
What is the color you are applying? Thanks
The color is “Sasha”!! 👌
I had to reach the bottom of the comments section to finally find one he answered…
Can you apply this directly to drywall or do you need to prime the drywall first?
Prime it first.
Do you know what kind of primer is needed for the drywall?
We recommend priming with a water-based stain blocking primer first. A good all purpose primer, like our All Purpose Base Coat is great, or you can pick one up from your local paint store.
you guys need to come through and answer all these questions. I have all the same ones.
I work in this field I’ll try to answer as many questions as I can!
Hahah I know, no questions answered....where is this company, in the comments. So much potential to grow the customer base
beautiful!
How can you call it a "first coat" (12:02) when it's actually 2 coats? The first application that is thinly applied is the first coat.
Each coat of Roman Clay consists of multiple thin overlapping layers. You want to get about about 60%-70% coverage in the first coat. After allowing the Roman Clay to dry for 2-4 hours, lightly sand and wipe off any excess residue with a clean rag, and then begin your second coat.
How many coats would you need for "In the Navy" roman plaster and should the primer be close to the finished color?
Our Roman Clay is a two coat application, but each coat is multiple overlapping layers. You should get full color coverage over any primer with the two coats, but you can use an Ultra Flat paint match in the same color (like In The Navy) to make the application a little easier.
My arms hurt just watching this. This would take f o r e v e r to do this in a house or even an apartment.
Lol I've done about 8 mansions already😂
And this stuff just works and looks the same over all my drywall mud.. like on my corners, inside and out?
This was in the Parade of Homes..abs. stunning.
Would love to see photos!
Does the surface has to be completely flat? Or can you apply over the orange peel texture many SoCal homes have? Or will the clay fill the texture to create the flat, Venetian plaster, look? I saw the comments regarding matte priming the surface but more worried about applying over a textured wall.
It has to be flat, there is more info on the website I believe and I also got instructions in my order that specified those requirements. Good luck!
Youd have to do a level 3 skim coat, sand it and youll have an easy break on applying it
I called portola to ask and they said to get a primer tinted to match my paint and that would disguise the bumps. Worked for mine. :)
Is this a green shade?
Did you start over primer or paint in this video?
I have orange peel textured drywall. Can I put on a skim coat on and apply over that?
Roman Clay is best applied over smooth surfaces. Any texture such as orange peel or knockdown are going to cause difficulties in application. A little roller nap texture is usually okay. In some cases priming the wall in the same color matched in our acrylic paint can help if there is a little texture. Definitely put on a skim coat prior to applying the Roman Clay.
What colour are you using, vert beautiful
This color is called "Sasha" from our Roman Clay collection!
What color is this that you’re using?
The color is “Sasha”!! 👌
I had to reach the bottom of the comments section to finally find one he answered…
What is the COLOR please? I'm trying to order THAT color. Thanks
Sasha
@@portolapaints OMG - Thank you!
That's it? After the second coat there's no need to paint?
That's it! After the second coat you can seal it for protection, or leave it be!
@@portolapaints How Long after the 2nd coat you should seal ... to be on the safe side ..
@@sharabshah7823 It's ready to be sealed as soon as the last coat is dry. Usually around an hour or two after the last coat. You can seal it at any time after, there's no rush.
How do I get this color in Pennsylvania? Pls help can I buy it in a local shop ? Something simulate ?
You can order from their website and they ship anywhere in the US I believe
I tried with piano room and Figueroa colors , never got the effects, rather use Venetian ,
CAN I USE THIS ON A FIBER GLASS RV??
Ideally, Roman Clay should be applied to super smooth, level 5-drywall surfaces. Roman Clay is applied in very thin, overlapping layers, so cracking isn't normally an issue unless the substrate cracks. If the fiberglass flexes with movement it may cause a problem. We definitely recommend sampling and testing it out on the surface before deciding if it works for you! For more information please contact our support team at (323) 655-2211.
Could you do this on a countertop and epoxy over?
I wouldn't recommend doing this however we've had people paint their tile (especially if this is for decoration purposes; ideally not a surface that's high-traffic). So feel free to give this a shot if you'd like however we don't recommend because you might experience issues with adhesion.
Say we have textured walls, what makes it difficult to apply this product? Is it still possible to apply Roman clay on textured walls?
Noo they gotta be smooth
Do you need a special type of primer?
With our Roman Clay, you can use any All-purpose primer.
What is the color you are working with?
The color is “Sasha”!! 👌
I had to reach the bottom of the comments section to finally find one he answered…
I learned this stuff is way more drippy than it appears in the video. I was losing lots of roman clay dripping off my putty knife as I was applying.
Me too. I’m thinking about applying it with a rag and going over it with the knife. It was very hard to fully cover the wall with even a little texture. This video is a completely smooth surface.
@@Michelle-dg4kd I had minor orange peel texture before but I sanded and then put a primer coat on before applying the Roman clay.
Put less on the trowel or kniife
@@DougMoore-es6zg that doesn't make it less drippy.
@@grocerylist no it just is how you use it. No different than any other product,you need to learn how to use it. Put excess joint compound on your blade ,same results. When doing fine finish some thin that same joint compound,gets “drippy” . You have to put smaller amounts on at a time. It’s you not the product
What is the name for the tool used to apply?
Putty knife, can be found at most hardware stores
Could you use this on laminate countertops and then seal it?
Can I do this directly over brick
Is Roman Clay fine to use in Bathrooms?
Hi there,
Yes Roman Clay is actually the recommended finish to use in bathrooms. It's actually a lot more forgiving in the long run and a lot more easier to touch up.
I recommend sealing the bathroom with our Roman Clay Topcoat. It will add a slight sheen to the finish but it's kind of like an Eggshell level of sheen which ranges between 4-8%.
Feel free to reach back out to us on info@portolapaints.com if there are any other questions or concerns.
Best,
Katrina
beautiful
Can you apply this over already painted walls?
You can apply Roman Clay over most matte paint, or any matte primer - primer is usually suggested! The main thing is to have the walls be as smooth as possible :)
This is great! So you can apply this directly to drywall?
After is prime yes but must be level 5 before applying the product
@@amcustompainting what do you mean by level 5?
Level 5 means absolutely smooth..It's a trade term...It's not 100% necessary..Any GOOD & SKILLED drywall finisher can do a level 3 and it'll be fine..
Cab this be applied onto sanded plywood?
i’d say if you seal the plywood it shouldn’t be an issue ,
use a good primer and do two coats of that to make sure there are no holidays.
Q precio tiene el metro cuadrado o pie..gracias
Wow never heard of this
Jamie and Casey and crew at Portola Paints - No better products or people with whom to create with paint!
Is this soapstone?
The color is “Sasha”!! 👌
I had to reach the bottom of the comments section to finally find one he answered…
Can this product be applied over plywood? As in a custom range hood??
You should give them a call. They're great and answered all my questions. I'm applying this to my range hood as well but it's finished off with sheetrock.
Did either of you ever use this over a range hood? Would love to see pictures!! We are considering doing the same but can see examples anywhere.
*can’t
Love how he says to start in a corner, 1 minute after he’s been applying it and not from a corner.
Nice
You have an interesting squiggle in your blade application.
Are you in Los Angeles? Can you come do this for my youtube channel? I want to do this for my fireplace column wall:)
If you were in Baltimore I would gladly introduce you to traditional Venetian plaster for such a project 👋
You were so ahead of your time with your products omg!
Seems like a proper Italian plastering (Venetian) trowel would be a lot easier. Just sayin'
applying with a 6" knife on a chalk board size piece doesn't give you the gist of it when you're doing walls and ceilings; quick process? are you kidding? my client wants all their walls and ceilings done with this clay finish
Hello, I'm looking for a master of this trade for a future project in the Orange County area (Southern California). If you can please message me, thank you!
Hi Vamosis! Shoot us an email, I have some painters I can recommend. info@portolapaints.com
You must have wrists of steel!
Looks like a knock off of Venetian plaster
I'm building a cargo van toy hauler. can this roman clay be used on an interior of a shower
Roman Clay is a decorative wall finish and is not waterproof or stain-proof. It should not be used inside a shower.
Can I use the roman clay on wood (ex: coffee table) and canvases as well?
Yes, just make sure you degloss, sand, and prime it with a wood sealing primer.
@@senaej1 awesome thanks for the tip
As long as you Prime before you apply this product...I don't see why not
can the clay be used in an environment with extreme temperature changes.
Roman Clay is for interior use only, so exposure to most interior temperatures should be just fine. As Roman Clay is water-based, it should not be applied below 50 degrees Fahrenheit, or allowed to freeze when wet as it will effect the viability of the product.