I have just purchased an LS 3.40 and I will be following your guide - the speakers it comes with by default are terrible! Thanks for putting this together for us.
Great video. New subscriber. I just did this on my LS MT342 Cab tractor. I need to get new speakers. The factory ones are not good. I did not use the factory harness or bracket, but it did fine. I made a video of it. 👍
Thanks for the video! I just installed my radio in my New Holland Boomer 40. Listening to your video as I tuck stuff away. I definitely will need to follow your advice of replacing the factory speakers...they sound like they only handle a couple of watts. Thanks again for the video.
For anyone else having this issue... You have to pry down on the speaker cover to put pressure on the nut on the backside of the bolt. Otherwise it just spins. I put a screwdriver between the cover and the roof, pushed downward as I spun out the screws.
Important question. On your cabs interior switches at your your right hand console do your switches light up at all? It seems mine did, when I got it, 4 . 1 hours. Ls MT5.73. No fuse for those LED switch lights, manual says "replace LED." Activated by full back rotation of turn signal lever dial. Mechanic and manual state no fuses for it, but my memory seems to think it did work on day one but few months later at night, now they don't. Mechanic said there is no light in the switch, or under panel...only hazard light lights up. So I am wondering if its a manufacturer defect or intended design and my memory is mistaken. Can you check yours? Dealer says none of their cab tractors have illuminated switches for night time use. Manual says "combination switch" and rotate to activate lights, if no light check fuse...none for "LED" OR CHANGE BULB. EVERY PLACE it says instrument panel/ lights, the solution is exactly "LED". You can see my frustration. So all I need is a yes or know that when the ring on the turn signal is turned to you all the way, do ANY switches in cab interior light up other than 4 way hazard switch like my LS MT5.73 (2020 model)?
Nice tractor man! The radio set up is a nice upgrade. I’m sure it can get blah driving around with no radio. Looking forward to seeing the tractor in action.
Where did you get the 4" to 5.25 " adapters. I have been all over Amazon and haven't had any luck finding them. I just bought a new LS MT3 47 two weeks ago and the speakers sound like their blown. I was hoping you could tell me you're you found them. Thank you
Nice job on installing the speakers and radio, can you give me where to get the speakers and the spacer to make them go from4" 51/2" .I no a lot of people put stuff in their links,but I don't know how to find the links. Thank you
I have just purchased an LS 3.40 and I will be following your guide - the speakers it comes with by default are terrible! Thanks for putting this together for us.
Great video. New subscriber. I just did this on my LS MT342 Cab tractor. I need to get new speakers. The factory ones are not good. I did not use the factory harness or bracket, but it did fine. I made a video of it. 👍
Thanks for the video! I just installed my radio in my New Holland Boomer 40. Listening to your video as I tuck stuff away. I definitely will need to follow your advice of replacing the factory speakers...they sound like they only handle a couple of watts. Thanks again for the video.
How did you get the screws out ? Mine twist lose but I can’t get the grill and speaker to come out. Didn’t want to pry too much.
Did you ever figure this out? I'm having the same problem.
For anyone else having this issue... You have to pry down on the speaker cover to put pressure on the nut on the backside of the bolt. Otherwise it just spins. I put a screwdriver between the cover and the roof, pushed downward as I spun out the screws.
Nice job on the install. Only problem is reality is starting to set in winter is coming!
Important question. On your cabs interior switches at your your right hand console do your switches light up at all? It seems mine did, when I got it, 4 . 1 hours. Ls MT5.73. No fuse for those LED switch lights, manual says "replace LED." Activated by full back rotation of turn signal lever dial. Mechanic and manual state no fuses for it, but my memory seems to think it did work on day one but few months later at night, now they don't.
Mechanic said there is no light in the switch, or under panel...only hazard light lights up. So I am wondering if its a manufacturer defect or intended design and my memory is mistaken.
Can you check yours? Dealer says none of their cab tractors have illuminated switches for night time use. Manual says "combination switch" and rotate to activate lights, if no light check fuse...none for "LED" OR CHANGE BULB. EVERY PLACE it says instrument panel/ lights, the solution is exactly "LED".
You can see my frustration. So all I need is a yes or know that when the ring on the turn signal is turned to you all the way, do ANY switches in cab interior light up other than 4 way hazard switch like my LS MT5.73 (2020 model)?
I need to go look
Nice tractor man! The radio set up is a nice upgrade. I’m sure it can get blah driving around with no radio. Looking forward to seeing the tractor in action.
Thanks, I can order these and put my speakers in.
Where did you get the 4" to 5.25 " adapters. I have been all over Amazon and haven't had any luck finding them. I just bought a new LS MT3 47 two weeks ago and the speakers sound like their blown. I was hoping you could tell me you're you found them. Thank you
JSP Manufacturing 2 Pack of 1 Black Plastic Depth Ring Adapter Spacer for 5.25"- 6" Car Speaker USA
amzn.to/2xA9d96
Have you had any issues with your LS tractor?
that's one powerful machine!
Nice job on installing the speakers and radio, can you give me where to get the speakers and the spacer to make them go from4" 51/2" .I no a lot of people put stuff in their links,but I don't know how to find the links. Thank you
JSP Manufacturing 2 Pack of 1 Black Plastic Depth Ring Adapter Spacer for 5.25"- 6" Car Speaker USA
amzn.to/2xA9d96
awesome install!
I know that thing came with heat but does it face AC also ?
Of course you can't just have heat you also have to have AC
I mean 4" " to 5.25" thank you
Yes
I'm starting to have withdrawal from the lack of bad heat exchanger videos :)))
then again, I'd rather not have winter.
👍🏻👍🏻👍🏻
Nice set up
you may have been better off with blue tooth headphones.
Another guy on youtube has a 4140 and it seems like a piece of crap. Hope you don't have the same issues
LS tractors suck
Pretty happy with mine
I looked at an LS but the tractor doesn’t have a lot of things that come standard and the tractors are made really cheap
I've had mine 3 years without a single problem and I beat it like a rented mule.
I read all the bad press but held my nose and went LS anyway. I'm glad I did. No regrets.
I'm very happy with mine, I guess they have listened to feedback and improved things since your thoughts.