How to Replace Headlights 10-13 Cadillac SRX
Вставка
- Опубліковано 23 сер 2024
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 10, 11, 12, 13 Cadillac SRX
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oWF/1AX...
• Phillips Head Screwdriver 1aau.to/oWF/1AX...
• 10mm Socket 1aau.to/oHq/1AX...
• 7mm Socket 1aau.to/oHq/1AX...
• Trim Tool Set 1aau.to/ojP/1AX...
• Pick 1aau.to/ofq/1AX...
For More Info visit us at 1aau.to/h/aFs/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I did this myself today!!! Took me 3 hours total - start to finish- I have zero experience with this. My lights look amazing!!! Thanks so much for this video! 💖
+Heather B Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Excellent video! Just replaced my headlight assemblies today - it took 3 hours. Following the steps in this video, it’s a very approachable project for most DIY’ers.
Great job of taking your time to describe exactly what I would be seeing while doing this project. This was an excellent step by step video. Thanks.
Thank you for the great feedback! +Gregg Mo
Thank you for the step by step video. Easily saved me lots of money because driving mine at night was unsafe.
I can honestly say this channel has saved me a lot of money
A clear and easy to follow how-to video. I hope to enjoy my SRX for many years to come. Thank you!
+Alex Alanis Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
I just completed my 08. Very good video. I'm very happy I saved $1200. I did mine with no help in 3 hours and add new headlight wiring connections on both sides. Thank you
Excellent instructions and visuals, thanks! Couple notes for anyone doing this: You can do it without a lift or jack, just a tight fit on the underside and have to turn the wheels a few times to reach all the bolts. Also replacement lights I bought did not have the plastic bracket that sits under each headlight. Simple enough to take them off the old and snap onto the new lights before install, just something to check before you plug in the new ones.
Thank you so much for this video! My husband watched this video and fixed our SRX's lights all by himself! This video was more than helpful, it guided us step by step!
Thank you, so much, for posting this. I will be attempting this job myself on Friday.
Good video! Thank you.
PS: No need to remove the entire bumper out, fellas. Just be loosen it on the sides and top there's enough room to get the assembly out.
Just found this video best video by far I just changed my SRX headlights after watching took me an hour and a half tops with basic hand tools
Highly recommend for DIY enthusiasts
From Jordan, a thousand million thanks to you for this clarification. You made me explain to the mechanic how to change the lights for me easily and quickly.❤
+@muradtay4071 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Great step by step. Saved me major $$$$$ . Cadillac dealer wanted $350.00 + to replace headlamp bulb. My headlamps were sweating up and I believe causing my bulb to short out, so l was able to seal them also. Thanks again, Cheers.
I followed all of your instructions and everything went perfect. Great video as always. Thank you...
Awwsome video,step by step ...saved me alot of money.. I always watch your videos when i need some guidance..Keep up the great videos..
Got my headlights in yesterday, change them out today. Everything works great. The only thing I would add is that when you change over the headlights you have to takeoff one plastic bracket, it just pops out but you need to do that because your bottom bolt on the side will not have anything to fasten to.
Gonna be doing a headlight swap here soon thanks to this video, had a certified dealership quote me 1500 for the whole thing I got parts and lights for $500 and gonna swap it all out for free thanks to this video thank you guys so much, the Cadillac SRX is a tricky one but not anymore thanks to you guys!
I just did both DRLs on my 2013 SRX4 today. Took about 2.5 hours including the trip to AutoZone. The trickiest part was getting bumper back on by myself; lining up the three 10 mm bolts on the bottom was a little frustrating. Thanks so much for posting this!
+Eric Banks Thank you for your feedback!
Thank you for making this video!! I'm gonna try this on my car because Cadillac and everyone else wants a fortune! I fixed my own sunroof tube leak as well on both sides because of a similar video by a Meinike mechanic on UA-cam. Saved $700 doing it myself instead of Cadillac. :) I'm a female with ZERO experience in this department. I'm happy! Thanks!
+Heather B Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
The dim SRX headlights are a safety hazard caused by defective design, and should be recalled for free replacement. Until then, I'm glad this video will save me labor costs. Thank you.
Agreed. Its really a joke that GM has left us with un- drivable vehicles once the sun sets.
I believe there is a class-action suit against Cadillac.
The feds have called for a factory recall. (I think)
The lens allows water to enter and cloud the headlight.
My 2010 has very weak low bean projection.
There should be, this is ridiculous. 2013 SRX and my wife's low beams are so dim it is a safety hazard. You have to drive with the bright lights on and be a dick to everyone else just so you can see at night. I'm about to do an LED swap hopefully it works. Have to watch a video and tear half the car apart to change headlights.
As far as I know, the law suit is California and Florida only and it has been settled that they will reimburse up to $1600.00 only due to this, and you have to have your paperwork and diagnosis from a certified dealer only. You have to pay out of pocket first as they will only reimburse. Some settlement. The problem is that they are fighting the recall. It should absolutely be recalled, it's a huge safety hazard, it's a huge technical flaw, and GM has known about it for almost a decade for the 2010-2016 models. The sealant they use to hold the lens and the housing together deteriorates quickly and causes moisture to short out the bulbs and other electronic components. I am adding GM to my "DO NOT BUY" list along with Volkswagen.
Ugh, I might as well have 0 headlights without my brights on. Very dangerous.
Thanks for the tutorial. I replaced both of my front light assembly very easily.
Very Helpful. Big thumbs ups.
(I would add to test the lights before putting on the front fender)
Time to buy some cordless tools!
Awesome video, gave me the confidence I needed to do this rather large job. For my 2016 Cadillac SRX, the wheel well screws are actually a T15 Torx instead of a Phillips head. Also, when I removed the bumper, there was no connector to release nor was the windshield washer hose attached, the bumper came off very easily. For re-assembly, the bottom of the bumper must pass under car first, then it is very easy to re-assemble. Used Diode Dynamics LED bulbs instead of halogen (this is what caused the problem to begin with), lots of nice white light now, can see in the dark again!! Thanks again.
Well, that was a piece of cake. It's a same that the process of changing a headlight bulb requires you to remove the bumper. C'mon engineers. You have to do better. You guys do a great job with your videos - always clear explanations with excellent lighting and close-up shots.
I really like your video library and often use it. I just changed headlights on daughters 2014 SRX. There is one more 10mm bolt holding the headlight coming in from the outside. Everything else is the same. Thanks a lot.
+upptowne Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You guys do excellent work! Thank you very much!!
Thank you for your video, i replaced my srx today.
Great video, changed mine out in an hour and it looks great! Thanks!
+karstenhain Thank you! We are happy we could help!
I have a 2016 real dim low beams at night where do I get the better brighter headlights ? Thank you
I have to do this replacement for both headlight assembly on a 2015 SRX. Any large differences in the disassembly?
This is not about replacing headlight bulbs don’t waste your time if that’s what you’re up to
It would be nice if you could show how you adjusted lights heights.
Thanks.
The day Cadillac either gives a lifetime warranty on their headlights or they actually use sealant in the seams to keep moisture out, I may buy another one. But the way the headlights are now and how incredibly over priced replacements are it makes their vehicles not even worth looking at.
I am adding an Morimoto HID kit, the stock halogen projector is terrible! My wife's previous SRX was a premium model with the OEM HID headlamps, that were great.
Excellent 👍
Only recommendation would be to check the lights are working correctly prior to putting it all back together
Ok, I'm NOT a professional mechanic but I've replaced enough of these modern-day bulbs to know that you may want to test them BEFORE you reassemble all of those pieces back onto the vehicle.................just a thought.
Good job explaining I’d also invest in some electric impacts and ratchets of air it would not take you no where near as long
+Robert Rayburn Thank you for the suggestion! 1aauto.com
I have a 2014 SRX Luxury and looking to buy a new light unit. Will LEDs fit into this unit or would they be to large.
Jeez!!!! It would be quicker to buy a new SRX than to replace a headlight. Total time to remove a headlight from my 911 is shorter than it took me to write this.
How can i adjust the headlights Height and left to right?
Well guess I’m going to the dealer to get the headlights replaced. Lol
Thanks for this amazing video. I just got my car inspected and the passenger side headlight is super dim and you can see the moister in side the plastic housing where the lens sits.. Illl be ordering these to replace the bad one.. I do have a question. the Drivers side headlight is functioning well do I need to replace that one as well and will this fix the dim low beam problem. I am the owner of a SRX 2010 model. I was quoted for the the passenger side almost 600.00 dollars with labor.
+Joe Damon Thanks for watching! You do not have to replace the driver side along with the passenger side, but you need to keep in mind that they might not match up cosmetically. If they are the original headlights then I would imagine they have some oxidation, and if you put on a new passenger side the old driver side might not look very good compared to the new one! 1aauto.com
This video was a big help changed bulbs reinstalled everything . My lights are still dim my high beam lights perfect my regular lighs dim backk where i started.
2016 SRX owner. Can not see to drive at night because the dims are not bright enough. Still under factory warranty and dealer can not or has no fix for this problem. I started a case file with GM. How are you doing with your light problem?
@@wvahillbillyok Good luck, Cadillac will not even acknowledge the dim headlight issue is there fault, through bad design or engineering. I am going through that with my local dealer.
Thanks for this great video. @Batma did you only change the bulbs and not the whole assembly? I'm watching this video to prepare for swapping both full assemblies to hopefully fix low beam dimness issues. I believe the projector gets burned spots on it internally such that if you change the bulbs there will be no difference. I'm thinking only way to fix it is to buy the whole assembly. You should buy it from these guys
@@leliasworld Try installing HID kit. I used Kensun HID Headlight Xenon Conversion Kit 35W (I have 6k kelvin). It was $40 on ebay. You will need buy a wire harness for HIDs that connects to the battery that helps power the ballasts. You don't need to remove the bumper to do the job, just the air box and the fuse box cover on the drivers side. I put a notch in the round dust cover to run the wires through. Here is the ebay site: www.ebay.com/itm/Kensun-HID-Headlight-Xenon-Conversion-Kit-35W-/302777351317?_trksid=p2385738.m4383.l4275.c10&&&var=601659607704&varId=601659607704
The video was very informative but I was very disappointed the alignment portion at the end didn't use the actual car being worked on. It offers no info on where the adjustment/alignment screws are! It uses a completely different and much older vehicle that has nothing to do with this project. It would be very frustrating to reassemble this monument to poor engineering only to find out that the adjustment screws were located under it all... Perhaps someone could share some info on this matter?
Did you change the bulbs or the whole assembly. You left that part out
+SwitchDoctor Thanks for watching! We reused the original light because it didn't need to be replaced, but this video shows you how to replace the entire assembly.
How do adjust the lights?
Be ready for surprises. Some screws are not as shown in video
Does it require any adjustments?
+Seiko Andora Yes, there will be adjustment screws on the back of the headlight assembly.
Has anyone changed xenon to led?need help asap.
When changing the headlights does the computer have to be rebooted
+James McEady Thank you for your inquiry! No, the computer would not need to be reset. Please let us know if you have any further questions, thank you!
Would this be the same for 2015
+jamesybarbo We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Cómo puedo quitar la consola
All I want to do is change the bulbs. Please, tell me I don't have to do all this...
I dread doing this job in the near future, all because of a turn signal bulb is burnt out. A lousy light bulb!
2010 srx4 2.8t stabilitrak issues....Helppppp please
For replaced a bulb 😂
GM has lost their minds. No wonder why they go bankrupt. Gee I wonder why your having trouble selling your vehicles. It's not a brain buster.
Wow this is amazingly time consuming...a 2006 volvo xc90 takes under 10 second
Cadalac sucks they make you take the whole front of the car off just to change the lights