How did THAT get THERE?!
Вставка
- Опубліковано 19 бер 2020
- This was my second attempt at off center woodturning. Just as nerve wracking as the first time I made an off center goblet. Not everything went to plan, but I'm glad I could at least salvage the captive ring!
Subscribe for more videos: ua-cam.com/users/CookWoodwor...
My tools:
Starbond Glue: bit.ly/2RFrayA (Use discount code "cook" for 10% off!)
Resin: amzn.to/2nUhFPg
Finishing Oil: amzn.to/2oAFPP6
Carbide Chisels: amzn.to/2NUiEdq
Face Shield: amzn.to/2Ac4Cvj
Center Finder: amzn.to/2ld06Ju
Jet Lathe: amzn.to/2qG2wD5
Nova Chuck: amzn.to/32tJvkm
Respirator: amzn.to/2N7mxfm
Miter Saw: amzn.to/2ZpjuBW
Drill: amzn.to/2XtnW0G
Square: amzn.to/2VaCNzW
Clamps: amzn.to/2UvPSiZ
*if you shop through these links I may receive a small commission. The price is the same for you, but it helps support me as a beginner woodturner in my quest to get a bigger lathe to make bigger projects, and I really appreciate it!
#woodturning
#woodworking - Навчання та стиль
You are the lord of the rings💪💪😁
Well done 🤣
thanks👌😉
Nice
😂😂😂
@@woodeninventorchannel3892 😂🤣🤣🤣
I love the goblet form. Captured rings are so much fun too, I took my captured ring tool out to my Dad's place to show him how to turn them (he's been turning for years) and it was really cool being able to teach him something for a change :)
I need one of those tools! Did you make it yourself?
I love how you leave mistakes in the videos. Makes me feel better about still learning and making my mistakes
It's not video mistake it work mistake - and it's happen more often than we see in videos. I think woodcraft failure videos would overwhelm successful ones. True professional never gives up. Huge respect.
The asymmetry and the shape of the bowl gives it the 60s look of something from Star Trek TOS. Bravo!
A nice recapture of a captured ring
İ bout cried when the forst ring broke. Gladyou were able to save the piece! Well done!
Thank you!
You can tape down the second ring so that it doesn't flail so much and possibly break again.
I made something very similar to that in my high school woodshop class.
A candy bowl with a floating ring around the center stem.
After I had cut the ring loose I taped it to the bottom base to keep it from flapping all over the place. It allowed me to finish off the stem without the ring getting in the way or from it flapping around and breaking.
I love the look of things like this because they often bring about a very good conversation piece.
I do love the way you offset your piece to get that off center stem. That gives it a really cool look..
Its nice that you show your mistakes or misadventures as well :)
Good result in the end
Once the ring is free, tape it in place so the banging around does not damage it. Good job.
Heck of a ring tone. really enjoyed watching, look forward to turning one later
Pretty awesome, and a clutch save to boot! It's crazy, out of all these woodturning guys on UA-cam, this is the first "mistake" I've come across. I'm sure there's more, and definitely more dangerous ones, but nobody wants to show those! Great job!
Wow! Amazing piece,good recovery!!
As the great Bob Ross would say, "That's a happy little accident."
Seriously, that thing turned out so cool looking!
Amazing, and you make it look so easy. That’s real talent.
great recovery from a broken turning, very smart of you to do the floating ring,
Ring-a-ding-ding you could hear the wood sing. Nice save on the captured ring and great finished product.
That's AWESOME!!! I really need to try offset turning!!!👍
Sometimes the worst mistake becomes your new ring bearer
I have not seen anything like this before - very nice work!
Very creative and an excellent save!! You are a pro!!😊👍
Great recovery.
Yikes!!!! Have NEVER seen anything like that. Wow! That’s amazing! Well done!
That off-center turn scared the you-know-what outta me!
Hah it freaked me out the first time I tried it for sure
good recovery Cook. if i may, after cutting the ring you can sand it by glueing the send paper to the goblet leg and let it sended and 2nd, use a tape to stick the ring to upper part of the goblet so it wont bother you finishing the rest of the goblet.
Thanks for the tip!
Love the ring
Looks like you finally 'put a ring on it'!! Congrats!! :)
Wow, it looks like some sort of engine part from an exotic supercar! Amazing work, thanks for sharing!
Thanks for watching!
Nice recovery. Very nice piece.
1 ring to rule them all
Wow just a stunning goblet ..Would not look out of place in a fantasy film setting ..love the ring it’s really different and really makes this beautiful goblet 😀
Thanks so much!
That "Peep" sound with the expletive I have come to know while doing some wood turning projects. It happens quite easily if the attention wanders for even a moment.
Your channel showed up in my recommendations, wow amazing skillz and vision. Beautiful piece of art. I’m ringing that sub 🛎 ❤️
Thank you!!
I need to use safety goggles even watching this video
Hahahaha
RING OF EXCELLENCE
Another excellent project thank you 🤟🤟🤟🤟🤟
I had a pretty good idea about making the ring, I just didn't know how you got the twist in there.
Seeing the ring flipping around made me think it was a dead ringer for sure.
I thought wood turning is a waste of time, but you changed my mind. Great work.
You are the best RING torturer I ever seen. I could hear it screaming, AHHHH....Help Me........Or.... My "precious....precious...." (Lord of the Ring reference}
Wow! Nice offset work with the G3. I'm glad you're comfortable with it, I sure am not! 😆
That looked crazy dangerous when you spun it off-set
Nice work and such great and sharp tools. I am beginner and still having most issues with dull and some handmade tools since woodturning market in my country sucks!
Yes sharp tools are very important! Keep at it!
man, you are something else, wow !
Even after a slight f(beep) up with the first ring you still managed to create a very beautiful piece. Even I started swearing when I saw the first ring fly apart. Man that would have really (beep) me off if that had happened to me.
Haha yeah one little slip and I almost ruined the whole (beep) thing
"Ring along with me." Brings back memories of wood turning in High School shop class. Very nice project.
Cececsdd k l, zzlz z
A great job !
Sweet recovery....
But I thought you needed one of those $500 chucks, a $5,000 lathe, and of course those high priced Thompson tools to turn an off set piece. You proved me wrong. Nice work.
That's better than a ship in a bottle.😁
Mike, I didn't forget to try the ring on an off center goblet!
Ooh I noticed first thing 😎👍😁😃 -Mike
Not what I imagined watching when entering the title on google
When you screw up, sometimes you have to give em a ring.
Nice recovery, mate!
თაბაშირის საქმე
I've got a great comment about your catch, but I figure you already came up with it :-) Great job recovering from the bitter end.
Buenas noches, feliz año nuevo muy interesante su trabajo, ya me a pasado que terminando y algo se rompe, me gustó mucho que no lo dejara y hizo un lindo anillo, fue una solución.
You may not work in a circus but you are a Ring Master.😊😊😊
my dad was a cabinet maker in the 60's thru early 80's. though a lathe wouldn't have been used in any work I saw him do he feared the table saw more than a lathe.
to me its always looked terrifying. I always see marks and holes in the walls behind the lathes when you guys use them. I never assume its from debris. I always
guessed it was the chisels going flying.
Nope, the holes in walls are from the language used after a 'happy little accident.'
You are the ring of the overlords.
As a finished piece it turned out really well Drew🏆 Something to be proud of fer sure 👍😃 Why didn't you use the tennis ball, even though you didn't need it - I was on pins and needles the whole time.📌🧵 Thanks for braving this project and showing us🙏 -Mike
p.s. The fractured ring reminded me of a mushroom🍄 Sorta.
Thanks Mike! This one was too off kilter for the tennis ball to even have a spot to go😳
I'd say that save gets a ringing endorsement of the best save.
Hahahaha good one!
VERY NICE recovery!!!!!
Thanks Wayne!
I have been turning pens and small items for around 20 years. I understand you are just getting started (about a year) in wood turning. I hope I can master the bowl/spindle skew as well as you.... Keep Turning!!!! wayne
I'm sure you can! It took me a bit to get the hang of, and I still need a lot of practice, but bowls and big things can be so fun to turn!
Almost lost the ring idea, but you salvaged it.
Sometimes you get the captive ring and sometimes it gets you 🐻 (Lord of the Rings comment deserves the shout IMHO)
This one was pretty good...
man that goblet can hula hoop like no bodies business
Achievement Unlocked : How did THAT get THERE
Minecraft: "Achievement Unlocked: How did we get here?"
The Rest of us: "Achievement Unlocked: How did THAT get THERE?"
Perfect celestial Saturn ring
Verry good thanks for watching
Sweet !!!
My! My ring has never has so much action!
🤣🤣🤣
You really put that piece of wood through the wringer.
Le seigneur de l'anneau : "The lord of the ring one"
Je suis français, j'utilise un traducteur
toutes mes félicitations, c'est magnifique
I am French, I use a translator
congratulations, that's wonderful
4:18. That really feared me !
He liked it.....so he put a RING on it!
If you were rowing down Main Street in your canoe, and the right front wheel fell off...
How many pancakes could you fit in a doghouse?
None! Because ice cream has no bones!
8:36 - wouldn't it be easier to fix the ring on the right side (maybe with a piece of tape) while working on the left side, so it doesn't interfere with the cutting tools?
Nice work
Thanks
# Positive commenting ! Cranky ideas work ! It's different! All the BEST !
Great save on the ring!!!! They are really tricky. You've gotten really good with that gouge! :)
Thanks Gayle!
Im just wondeRing if this is gonna be my next project :P
Is that your new ring piece for the once you shredded when catching the tool? ;)
I LOVE this!!!!! Do you sell your turnings?
Thanks! Yes I sell some on my website cookwoodturning.com
Effring amazing!
Thank you!
I normally have a dodgy ring on Saturday morning following a curry and several scoops
I am amazed that the log stays in the chuck. Nice solution for the piece flying off, shit happens.
One ring to fool them all, one ring to beguile them.
One ring to bring them all and in the wood bind them.
in this corner of youtube where the chisels lie.
Love it WOW
Thanks!
7:03 The "SNAP!" sound made as the gouge decides to suddenly jump to the right into the wood makes me wonder if there wasn't something wrong with the wood at this point. Either that or you had it at the wrong angle and it dug in with disastrous consequences! You were turning it with an odd bent shape in it so that may have contributed to wobble which in turn may have caused the gouge to jump.
You are the Ring Bearer.
Fantastic supper marvelous
Morty : How did that get there?
Rick : OMG yeah... how did that get there?
You get to create a ring moment, only after a break up
Absolutely amazing work. Question, was the wood green or dry?
Thanks! It was pretty green, maybe a month drying at the time
I know UA-cam would would send you to bed without supper for putting this song in the background but all I could hear in my head was 🎶🎶"Single Ladies (Put a Ring on It)"🎶🎶
Haha yeah I'd be in UA-cam jail if I added that song
Your log wanted to marry your chisel @9:00
Very nice 👍
Thank you!
COMMENT QUESTION: "Do you like my ring-a-ding-chalice-thing?" ;)
Hey Beavis, he said ring! hehe heh hehehe!!
*W O N D E R F U L. ... CONGRATULATIONS. ... Beetho, da "Boomerang Flowers Band ®", de Belo Horizonte (MG), Brasil.*
What kind of wood is that? Cedar?