wood turning a 10 minute project that sells for 10 bucks
Вставка
- Опубліковано 10 чер 2024
- A 10 minute craft show project that sells for 10 bucks. This is a quick and easy wood turning project that sells great at craft shows. This was turned from a piece of cedar I found while I was camping. I stole it from the burn pile to turn on the lathe. This wood was very dry and it absorbed a lot of friction polish so it took several coats.
I hope you enjoy this new woodturning video.
As always thanks for watching!
#woodworking #how #video
tool links below;
As an Amazon affiliate I make a small commission if you make a purchase thru these links. It doesn't cost you anymore and it helps fund my youtube channel. I thank you in advance.
Chucks
amzn.to/46seEpL
3.75 chuck
amzn.to/3ttQ8Gb
3.75 shark jaws
amzn.to/3ttQ8Gb
2.75 chuck
amzn.to/48R6k4I
2.75 shark jaws
amzn.to/48R6k4I
Turning tools
Starter sets
amzn.to/46bUO26
amzn.to/3ruDbv8
Roughing gouge
amzn.to/3PFPPAY
Bedan
amzn.to/3ZjeUov
Skew
amzn.to/45OtmqZ
1/2 bowl gouge
amzn.to/48c27rT
Diamond parting tool
amzn.to/3PCy7hD - Навчання та стиль
Nice work with the skew 👍👍
Thank you! You should have seen me when I started.
Nice work, thanks for sharing
Thank you!
I appreciate you watching!
Combination of very sharp tools and the perfect touch
OH BOY! Far from perfect! More like sharp tools and lots of practice.
I'm nothing special. You can do it too! Just lots of practice.
simple yet adorable 😁
Thank you Lynda!
Simple but very nice
Thank you!
Nice !! Love how you make beautiful functional turnings. Thanks.
Thank you!
I appreciate that!
...love these types of projects...thanks for another one...👍
Matt
Thank you Matt!
Glad your enjoying them!
Very nice!
Thank you!
And if you have enough time you can make a tooth pick from a 2×4 😂
A while back I had a really nice steak. When I was done I discovered we were out of toothpicks, so I went out to the shop and turned one. It worked great and it's excellent skew practice.👍
Thanks for watching!
OH! It wasn't a 2x4 it was a cherry tree branch.
very nice little project. But what is it? A vase or a candle holder?
Vase. I said at the end. I guess you didn't watch it all.
Amazing what a difference a few burnt lines can make Rus. I'm about ready to start turning again after my shoulder replacement. Gonna make a wire and give it a try. Question, what make is your yellow lathe? Thanks...Dan
Thanks Dan! I'm glad to hear that. You must be chomping at the bit!
The yellow lathe is a harbor freight. I've had it about 4 years. It's been great. The only thing I don't like is the Reeves drive is pretty loud. It would be nice if it was quieter for my videos.
Take care buddy! Enjoy your shop time when you get in there.
Thanks Rus, definitely a little chomping going on. I use a harbor freight also (father's day gift), for it's short comings, it has worked well for me. Really do enjoy your channel. Thanks...Dan
O@@RcWoodturning
Loving these almost daily vids try one of the snowmen I emailed you
Thanks!
I was saving that for the holiday season.
@@RcWoodturning ahh can’t wait to see it your much more talented than I am can’t wait to see more!
@@Kingonionring200 Don't sell yourself short. The one's you showed me look pretty amazing.
@@RcWoodturning thank you
👏👍😀👍👏
Thank you!
I bet its more than 10 min for sure😂
Well I certainly don't work as fast as I used to. But I still can do it in 10 min.
How many kangaroos is that, or is it rabbits?
How many?
Excuse me but $1.00 a minute is a great way to starve to death
Your excused.
Really? With a 40 hour week that's over $100,000 a year.
Amazing! Isn't it?
@manuelalvarez7551 this woodturner never claimed he turned full time, nore did he state he earned that sorta annual income (although 100k + is certainly possible). To actually turn 6per hr, 48 ish per day etc etc, you'd obviously still need too gather, prepare & glue up the necessary materials required to achieve it let alone sharpening and maintenance etc.
Often as soon as some people think a woodturner can earn $10 in 10mins, turners can be accessed of charging to much. Clearly this guys skill and experience represents the many many years of training it's taken to make him the craftsman he is today. That experience is well worth 100k + PA - in reality it's often worth a lot more than that.
Не понимаю..миллион движений..туда сюда..а в результате простейшее изделие для детей...Иди вы, до последней минуты не знали, что хотите сделать? 🤔
Many times I don't know what it will be when I start. I let my creativity lead me. Also a lot of my viewers are new to woodturning. So sometimes I do extra steps to show tool positioning and technique. There are lots of other channels that don't do that. Maybe that's your cup of tea.
Thanks for watching!