@@faizabbes889 did u not watch the video from the start he made the plans on his computer u need to wake up ur a sleep he sales them for $70 on his web site
aliphatic glue would be better glue for the paper to wood, for a 22yo your doing some clever things unlike others on youtube, your building to a set of plans, I'm impressed by your engineering, keep it up Jornt you'll go far lad😎👌
totally agree with you. i build model planes and love the aliphatic glues too. This is a very neat clean build. I'll be following your channel from now on.
Any plans of filling the hull with foam? A couple of large blocks in the bow would prevent complete loss in the event of a catastrophic accident. Copying the inner design of the Yamaha this is modeled after would keep it afloat in a hurricane.
@@homemade_madness Als je dit gaat doen dan even de 2 componenten van polyservice bestellen. Het purschuim uit de bouwmarkt neemt namelijk water op en dat zou zonde wezen van deze mooie creatie.
@@doesntmatter3068 it depends on the way you see skill, dont come say me you know better about making anything, when you clearly dont seem to know anything about 3d modeling and making it a reality.
Great skills bro! I'd like to make an electric version for my channel. You said 3 people could fit on it, would it be possible to scale it down slightly or is the scaling joined with the design? I would 3D print the jet drive and impeller. Think it would work? 😅
Thanks man, been watching your channel for years😅 I think it could be done, best thing is to just scale the big papers, and scale them down by 15/18 (0.833) Then you can use 15 mm thick plywood for the framing (instead of 18) and all the notches will still fit perfectly😁 also a 3d printed jet drive is possible, check out DK the welder, he has some cool small jetdrive builds. Goodluck👊🏻
Boat building tip: to avoid deformation, build up a hull piece by piece symetrically - not one half first, then the other half. It prevents potential warping to one side, and will also make things more even if you want to do seam corrections simply because they are fresh in your memory as you go.
volevo farti i miei complimenti veramente un bel progetto volevo solo chiederti se lo scafo lo hai progettato tu o hai comprato il progetto su qualche sito on line
Have you ever thought about selling all the wood parts cut to size already and mail the plans from pcs's cut on to finished product I would be interested in that...
Wat een vet project man, en respect dat je al het werk allemaal zelf blijft doen! Lang niet iedereen heeft de luxe om een CNC te gebruiken, maar een decoupeerzaag hebben de meesten wel. Top werk, ik kijk uit naar het volgende deel!
Vet he! Kleine note: bij de meeste Makerspaces is meestal tegen een kleine vergoeding een lasersnijder te gebruiken, dus dan is in 2d snijden voor de meeste wel een optie! Maar een build met gereedschap wat iedereen al heeft is altijd fijn.
a few issues. 1 you should apply the resin before laying down a fibreglass layer. helps stick and prevents bubbles and warping. 2 You wore a respirator when applying the fibreglass but not even a mask when sanding it. That's how you die. Sanding Fibreglass is the most dangerous part
yea was good up to the fiberglass part, it's a must to apply resign first let dry apply a 2nd coat let dry, sand then apply a bottom coat then add the mat and glass top, people forget that the wood sucks up almost 75% of the resign meaning it will fail rather quickly.
The worst part about finding this video is that when I saw part 1 I got excited then saw it was posted on May 15. Well, I'm bummed I can't binge-watch this but I'll def be here for the rest of the project!! Good luck!
Not to take away from the excellent build but if you would have used the same panels you could have eliminated the frame all together using the “stitch and glue method”. It is the same process except no frame and it is almost as strong while being much quicker to build along with approximately a 50% weight reduction!
Great video and great designing, way better than I could ever attempt. I am currently building a stitch and glue sailing dinghy and I have a few suggestions: I am not sold on the PU glue that you used. Epoxy resin with wood flour or an additive like cel-o-fil that is designed for structural bonding and filleting would be a better choice. Also, try your hand at designing a stitch and glue hull. Instead of a frame with planks attached, bulkheads are used to add rigidity and water tight compartments for floatation. I think you could do it and would simplify the build process for any future designs.
My thoughts as well. I would have made the frame an exoskeleton and skinned the inside to make a mold and flipped a hull out of that all in fiberglass and composite
@@holmes1956O Yes, some pinholes covered over with mold release and plumbed to a compressed air supply would pop out real nice fiberglass (carbon fiber) and foam hull sections nicely using vacuum forming. By the way what happened to part 2 of this build?
Interesting idea. I wonder how a wooden hull will hold up over the years compared to a fully fiberglass hull. Also, out of curiosity, why design a jet ski hull when the amount of empty hulls available for purchase for next to nothing ($150-$300) seems to be endless, and those come with titles. Is that a “Florida only” scene and not everywhere? Also, IDK how it is where you live, but getting a PWC (personal water craft) titled is near impossible here where I am.
Ziet er netjes uit kan niet wachten voor deel 2. Ik vind die trap tractor al geweldig met die motor er in ben benieuwd als je de jetski klaar hebt wat voor moois je dan gaat maken. Ik zou zeggen blijf heel veel leuke en creatieve filmpjes maken 👍🏼😎
Hi. I have similar project jet ski with motorbike engine. Main drive is on chain but going to do like yours on tooth belt. Can you tell me do you have tooth pulleys the same diameter ratio or they different ? Been today on water, 6th gear, max reevs was running fine but not sure 1:1 is ok for jet pump 🤔 What your thoughts about ?
Parabéns meu amigo! Moro no Brasil, estou querendo construir o meu jet, só que aqui no Brasil a gente não consegue esse tipo de projeto, você poderia me dizer como conseguiu o seu? Obrigado e sucesso.
Esses gringos tem uma parafernália de ferramentas que no Brasil não existem devido ao alto custo de importação (impostos) .😮 Se o Brasil tivesse políticos sérios e voltados para o desenvolvimento da nação teríamos as mesmas ferramentas aqui pelos mesmos custos 🫵
Damn new sub, keep going with this work!!! it motivates a lot of people! I was wondering how much cost wood + fiber glass, because maybe i will have enough time in summer to get into it!
That's a sweet little boat, nice work! That hull should be almost indestructible, given the thick plywood you used. Should be just about right for a jet-ski! 👍
there are a number of resin types that work well for boat building. poly, iso(if I remember this name correctly), and of course epoxy.. they all have different properties they Excel at, and ease of working with, etc.. hope this helps a little. there are numerous threads on different boat forums where people discuss the pro's and con's of each if you want to learn more 👍
The fact that he’s using poly below the water line is a tad concerning. I guess at the end of the day this is UA-cam and its only being built for views not longevity.
Bank carft Take potato and bags for grow food and beens HCl viniger for any kind of poison and snake Take cotton fevicol and fabric white colour Cotton+fevicol dry Dry paper+fabric white fabric
June 19, 2018 Vision for Planetary Alignment - 예슈아커밍 / Yeshua Coming - On June 19, 2018, I would like to share with you my vision for planetary alignment what Yahweh God given me. The vision started like this. This is the old house where I was born. Whether it's been raining a lot or a lot of delayed laundry, I've been working hard on the laundry and hanging it on the clothesline. I saw the eastern sky. The eastern sky was very purple, with large black clouds. It was a very scary storm cloud. After checking it, it rained very heavily and terribly like a water bomb. And suddenly a huge tsunami struck between the east and the south. All of a sudden, I'm out of my mind. Laundry and stuff, refrigerators and all appliances float on the water in a fraction of a second. I have no mind. It happened so suddenly. I went out to the yard. Then, I looked up at the sky halfway between the east and the south. There were a few planets to the left of the sun, and some planets to the right. But before my eyes, the planets on the left lined up to the right, and the planets on the right lined up to the left. I was so excited to watch it. Wow! It's really amazing~ I'm looking at it like this, and my body is floating. It's a rapture~ Some people in the family went up and some were left behind. I looked there and opened my eyes. On June 19, 2018, I saw a vision of planetary alignment. The time of the rapture is very near. A vision and a dream are different. Dream, I can't even remember what dream I had the next day, but a vision can explain as clearly as the dream I had yesterday, even in 10, 20, or 30 years. This means that the planetary alignment occurs at the time of the rapture. When you see this phenomenon, you can see that the time of the rapture is very close. The planetary alignment is scheduled for June 15, 2022. Yeshua is coming very soon. Prepare for the Rapture. Shalom❤️ Jun 12 2022 Vision for Planetary Alignment (June 19, 2018) ua-cam.com/video/E4DCYDRSxFw/v-deo.html
be careful of using spray without mask, and never use spray in closed places! Fiberglass sanding should always be in open area with safety masks. THIS IS VERY IMPOSTANT IF YOU WISH TO MAKE IT TO THE THIRTIES WITHOU LUNG CANCER.. And great work building it !!!!!!
I like it , i was excited about one small hull but it was stitch and glue , no frame so it's sort of styling or it needs aluminum , Oh i wonder if it's possible to use the jetski [edit: jet drive] template on carbon fiber , it's small enough to maybe vacuum cure it and all seems like ...oh , another was maybe use it as the inner mold and cast it integral with the hull spars and stuff and fiberglass it thick instead so it's paper template, assembled is the cutaway foam that gets glassed that geometry with the rest of a hull was the other ,,, too long winded nice vids and plans it looks like
On your Homemade Madness site, the shop area mentions Apply Coupon. Where can I find one? I am interested in the inboard version of JetSki package, including the DXF file.
You should expect a cease and disist letter from Yamaha soon. Copying the hull of the Wave Runner blatantly violates Yamaha's IP, and you sell the design on your website. Consider designing you own hull, if you have the technical expertise to design a jet ski, you should be able to use open source CFD software.
Then just pop down the garden to the river and launch it !! This video is brought to you by ANOTHER poor little rich kid... Courtesy of mummy and daddys credit card 💃
Hey guy, I want so bad to build this. I have down loaded it and have the plans printed out full size. I would like to modify this as an outboard, to have a partial forward and side upper deck and be a sit in boat instead of a sit on top. Can you do some kind of design modification like that for the upper deck without changing the lower open boat, or should I just wing it myself? ? I am not very computer savvey at 70 years old. Sorry. But as a kid I had a 10 foot boat called a GW Invader with a 40hp on it and was loads of fun. Wanting to have something for a couple high speed runs thru my second childhood. Thanks.
Very easy to see. You are not a person who is used to boats. Pull out with a half finished boat. Without floating element inside the hull. Then you have not put on a life jacket. Amateur Santa .... I was born by the fjord. Been in a boat since I was 5 years old. Today I live in my sailboat. Wear a life jacket on it. My boat is 44 feet long. You begin to settle into an unfinished hull. Without any security. So is the recipe for Death. Sorrow. Funeral for your loved ones ....
Wow, this is really a wonderful video content Sir , since I was a kid I was obsessed with boats until now I'm still into dreaming of building one but I can't afford to do it since I don't have much , and then there comes your step by step video of how to create it , and then it gives me an inspiration to maybe try to build it bit by bit , and follow your drawings, instructions,dimensions and as well as your dedication to get it done . I just hope I can have your full or complete boat plan on my working table for in one way or another it could me help build my dreams. God bless you Sir, stay safe and healthy to keep you doing what you do, and inspiring us . It is an honor for me if one of these days you can share me your ideas on my first project. Thanks.
Não se põe emenda estrutural em alinhamento direto, mas sempre inverso, causa-se um ponto fraco na estrutura. De forma que, ex.: A longarina "A" recebeu uma emenda no ponto x/25, a longarina "B" a emenda deve ser feita em x/75.
One question, where or how or why it's look like no dust when you cut the plywood? In my workshop, it's always a mess.... Please help me... Did you used some kind of vacum?
Great job on those plains, if some one told be they are going to do what you are doing I would think "never going to happen" but I some how think that you can indeed do it...
bstthing ive seen on youtube...i like it the way it is as a boat..mayb jus a lil bigger if you was making it as a boat..cant imagine how much time and work this took...once i get my garage/workshop oraganized i def might buy these plans if the price of plywood is good..but like i said id love if this was just a lil bigger boat..idk if you could adj the plans to make jus the hull bigger
Hmmmm,youtube didn't notify me of this video nor is it in my subscriptions even though I'm still subbed... Isn't the 1st time this has occured on this channel as well as others...
I appreciate you video but I am sorry to inform you but there is a guy in Vietnam who for years shown how he makes boats and jet skis showing the complete build and rebuilds of trashed engines with hand tools. Very inspirational but not in english and no subs. His cho. I will post a link asap . I did enjoy and applaud your video and technique I am hoping to sit down and start a project of my own design too.
Cool design, just not that efficient. Adding edges/ridges on the bottom and the sides that force water to stay in place or direct downwards would help the boat to rise to plane, specially since you have engine literally sucking water out under it. Faster and least amount of power you need to get it plane, more efficient design is. This tiny boat should have risen to plane in 5meters distance with that 4hp outboard even with all that back biased balance. This one looks cool but needs more power that necessary to skim over the water. Since wood weights less than metal on those connection points yes use screws to hold them until glue is dried, then remove them, drill hole and hammer in wooden dovel with glue. This removes weight, hold more and you wont run into issue of metal rusting or hitting it if you do repairs or modifications later. For fiber glass i loath full fiberglass cover on wooden frame. Once water gets in, it starts to rot and repairs become really hard. Much rather use polyester resin and saw dust to fill the gaps and coat the bottom with resin. In high use spots like keel, you can add strip of fiberglass to reinforce those particular spots. Also note how water will run over the hull. You want to have the fiberglass be on the sides and the rear and only then apply the center part. This way its layered so if there is ever crack due say collision to rock, yeah water can get in, but if you manage to get it to plane on coming water does not create high pressure zones, but low pressure zones instead ie making it this way prevents separated layers acting as water scoop that makes it even harder to get to plane and force water into the hull. This way you have good chance to get it to speed and run it to shore before it sinks. Small things but something ones buying those plans can easily fix them selfs.
I can't find any printing place that can print those size and I checked most every place in a city size of close to 1 million. Can they be made with actual dimensions?
Lekker bezig, mocht je een betere hechting willen op het hout dan zou je als primer G4 kunnen gebruiken is 1component. Na het aanbrengen kwartietje laten intrekken en dan plakt heel het opperplak. ook makkelijk op plekken waar je ondersteboven moet lamineren, gr
that's alot of work. why not build a polystyrene base with some wood for a motor mount/jet platform and eliminate the weight of wood? then fiberglass the body.
Plans: homemade-madness.com/shop
Where do you get the blueprint do you make it or did you buy it Thank you for your work Tell me please
bro share one
@@faizabbes889 did u not watch the video from the start he made the plans on his computer u need to wake up ur a sleep he sales them for $70 on his web site
Hi I'm no inglis pdf 👍
سلام خوبی آقا من از ایران پیام میدم ببخشید میشه لطف کنید نقشه ساخت این قایق را برای من ارسال کنید مرسی
aliphatic glue would be better glue for the paper to wood, for a 22yo your doing some clever things unlike others on youtube, your building to a set of plans, I'm impressed by your engineering, keep it up Jornt you'll go far lad😎👌
Thanks!!
totally agree with you. i build model planes and love the aliphatic glues too. This is a very neat clean build. I'll be following your channel from now on.
@@homemade_madness zdrastvuyte, ya khotel by svami svyazat'sya kak my mogli byt'
been using spray tac adhesive like he did for a while... seems to work fine too.
Any plans of filling the hull with foam? A couple of large blocks in the bow would prevent complete loss in the event of a catastrophic accident. Copying the inner design of the Yamaha this is modeled after would keep it afloat in a hurricane.
Yeah thought about that would be a good idea
@@homemade_madness Als je dit gaat doen dan even de 2 componenten van polyservice bestellen. Het purschuim uit de bouwmarkt neemt namelijk water op en dat zou zonde wezen van deze mooie creatie.
@@opelckadett Do you know the name or general chemical name of such 2 component foam?
There are 2 component foams available that will fill up void spaces... They are registered and often used in pontoons
@@Snakebestofbest Thanks. I'll have to research.
A "easy" task done by him again.
You have a high level of skill, keep going king!
High level of skill? I think not! If YOU think this is high level skill, you have no idea what high level skill is.
@@doesntmatter3068 it depends on the way you see skill, dont come say me you know better about making anything, when you clearly dont seem to know anything about 3d modeling and making it a reality.
Good Planning makes almost everything much Easier ! !
Great skills bro! I'd like to make an electric version for my channel. You said 3 people could fit on it, would it be possible to scale it down slightly or is the scaling joined with the design? I would 3D print the jet drive and impeller. Think it would work? 😅
Thanks man, been watching your channel for years😅 I think it could be done, best thing is to just scale the big papers, and scale them down by 15/18 (0.833) Then you can use 15 mm thick plywood for the framing (instead of 18) and all the notches will still fit perfectly😁 also a 3d printed jet drive is possible, check out DK the welder, he has some cool small jetdrive builds. Goodluck👊🏻
@@homemade_madness the parts u call truses are really called ribs
@@homemade_madness next time you fiberglass something they make special rollerrfs for doing fiberglass
Boat building tip: to avoid deformation, build up a hull piece by piece symetrically - not one half first, then the other half. It prevents potential warping to one side, and will also make things more even if you want to do seam corrections simply because they are fresh in your memory as you go.
😊
volevo farti i miei complimenti veramente un bel progetto volevo solo chiederti se lo scafo lo hai progettato tu o hai comprato il progetto su qualche sito on line
Have you ever thought about selling all the wood parts cut to size already and mail the plans from pcs's cut on to finished product I would be interested in that...
Wat een vet project man, en respect dat je al het werk allemaal zelf blijft doen! Lang niet iedereen heeft de luxe om een CNC te gebruiken, maar een decoupeerzaag hebben de meesten wel. Top werk, ik kijk uit naar het volgende deel!
Vet he! Kleine note: bij de meeste Makerspaces is meestal tegen een kleine vergoeding een lasersnijder te gebruiken, dus dan is in 2d snijden voor de meeste wel een optie! Maar een build met gereedschap wat iedereen al heeft is altijd fijn.
a few issues.
1 you should apply the resin before laying down a fibreglass layer. helps stick and prevents bubbles and warping.
2 You wore a respirator when applying the fibreglass but not even a mask when sanding it. That's how you die. Sanding Fibreglass is the most dangerous part
yea was good up to the fiberglass part, it's a must to apply resign first let dry apply a 2nd coat let dry, sand then apply a bottom coat then add the mat and glass top, people forget that the wood sucks up almost 75% of the resign meaning it will fail rather quickly.
The worst part about finding this video is that when I saw part 1 I got excited then saw it was posted on May 15. Well, I'm bummed I can't binge-watch this but I'll def be here for the rest of the project!! Good luck!
🤣sorry😅
Good job as always. I love how you did all this and never even had to pull out a ruler 🔥
Not to take away from the excellent build but if you would have used the same panels you could have eliminated the frame all together using the “stitch and glue method”. It is the same process except no frame and it is almost as strong while being much quicker to build along with approximately a 50% weight reduction!
This is going to be an amazing series! Can't wait for more
"DANG SON" !!!!!! Dont let goonzquad see it, they will copy :) by the way good job :)
Great video and great designing, way better than I could ever attempt. I am currently building a stitch and glue sailing dinghy and I have a few suggestions: I am not sold on the PU glue that you used. Epoxy resin with wood flour or an additive like cel-o-fil that is designed for structural bonding and filleting would be a better choice. Also, try your hand at designing a stitch and glue hull. Instead of a frame with planks attached, bulkheads are used to add rigidity and water tight compartments for floatation. I think you could do it and would simplify the build process for any future designs.
you are a good designer
What was the reasoning for not scaling it down a bit so the frame could be cut out directly from 1 sheet of wood?
Looking forward to part 2 😊👍
smaller than the tiesgames boat but a lot more skill and attention to detail involved lol. keep up the good work. that is one big jetski tho 😅
Kalo mau membeli gambar cetakan untuk membuat jetsky apakah bisa. Kalo bisa ...dimana belinya.?
Sweet build so far! Looking forward to part 2!
Looks awesome, keep up the good work!
I'm impressed with your skills and knowledge young man. You certainly will go far.
Zo! Verschaal dit deel ff naar 5 meter lang en 2 meter breed. Kan een hele dikke aluminium boot worden🤩
The wooden hull form could also be used as a fiberglass mold form for composite construction
My thoughts as well. I would have made the frame an exoskeleton and skinned the inside to make a mold and flipped a hull out of that all in fiberglass and composite
@@holmes1956O Yes, some pinholes covered over with mold release and plumbed to a compressed air supply would pop out real nice fiberglass (carbon fiber) and foam hull sections nicely using vacuum forming. By the way what happened to part 2 of this build?
Looks awesome bro! Some time ago I was searching on UA-cam for home made jetskis and I couldn't find any decent one.
Hello!! very good proyect , if posible to obtein the plans but en auto cad to cut the plywood with laser or cnc machine? , regards Jorge
Yes they are on my website
Please give me all structure measurements part by part measurement
Interesting idea. I wonder how a wooden hull will hold up over the years compared to a fully fiberglass hull.
Also, out of curiosity, why design a jet ski hull when the amount of empty hulls available for purchase for next to nothing ($150-$300) seems to be endless, and those come with titles. Is that a “Florida only” scene and not everywhere? Also, IDK how it is where you live, but getting a PWC (personal water craft) titled is near impossible here where I am.
looks like a new favorite channel, cool!
Je hebt mij weer overdonderd, man wat ben je goed en veelzijdig, kan niet wachten op deel 2
Ziet er netjes uit kan niet wachten voor deel 2. Ik vind die trap tractor al geweldig met die motor er in ben benieuwd als je de jetski klaar hebt wat voor moois je dan gaat maken. Ik zou zeggen blijf heel veel leuke en creatieve filmpjes maken 👍🏼😎
Metabo on wall, makita in use, interesting
Really cool it will be super strong with all those frames !
Je bent ook van alle markten thuis, top hoor👍🛥⚓😊
please someone has to put an LS in to it please XD
I would like to use epoxy if I build one.
Cheers from Amsterdam 🇳🇱🍀✊🥂 goed bezig!
did any 1 get plans from this guy and how long did they take to get them please let me know
Hi james…I dont see your order
Hi.
I have similar project jet ski with motorbike engine.
Main drive is on chain but going to do like yours on tooth belt. Can you tell me do you have tooth pulleys the same diameter ratio or they different ?
Been today on water, 6th gear, max reevs was running fine but not sure 1:1 is ok for jet pump 🤔
What your thoughts about ?
Parabéns meu amigo! Moro no Brasil, estou querendo construir o meu jet, só que aqui no Brasil a gente não consegue esse tipo de projeto, você poderia me dizer como conseguiu o seu? Obrigado e sucesso.
Esses gringos tem uma parafernália de ferramentas que no Brasil não existem devido ao alto custo de importação (impostos) .😮 Se o Brasil tivesse políticos sérios e voltados para o desenvolvimento da nação teríamos as mesmas ferramentas aqui pelos mesmos custos 🫵
Damn new sub, keep going with this work!!! it motivates a lot of people! I was wondering how much cost wood + fiber glass, because maybe i will have enough time in summer to get into it!
That's a sweet little boat, nice work! That hull should be almost indestructible, given the thick plywood you used. Should be just about right for a jet-ski! 👍
might be fine for lakes and rivers but spending a summer out on the ocean with that is straight up suicide.
@@s0nnyburnett - I never really considered a jetski to be an ocean going vessel either. Plenty of fun to be had in fresh water, though!
ua-cam.com/video/KxRtQOT8rEQ/v-deo.html
@@N1RKW lots of people use jet skis offshore, people even go from Miami to Bimini
Dang who cares about a no wake zone lol
Fantastic work! This poly resin is specifically made for boat building?
there are a number of resin types that work well for boat building. poly, iso(if I remember this name correctly), and of course epoxy.. they all have different properties they Excel at, and ease of working with, etc..
hope this helps a little. there are numerous threads on different boat forums where people discuss the pro's and con's of each if you want to learn more 👍
The fact that he’s using poly below the water line is a tad concerning. I guess at the end of the day this is UA-cam and its only being built for views not longevity.
Bank carft
Take potato and bags for grow food and beens HCl viniger for any kind of poison and snake
Take cotton fevicol and fabric white colour
Cotton+fevicol dry
Dry paper+fabric white fabric
Great Video.... Can you Build a Flying Manned Quadcopter/Octocopter with diy plans. Thanks....
June 19, 2018 Vision for Planetary Alignment
- 예슈아커밍 / Yeshua Coming -
On June 19, 2018, I would like to share with you my vision for planetary alignment what Yahweh God given me.
The vision started like this.
This is the old house where I was born. Whether it's been raining a lot or a lot of delayed laundry, I've been working hard on the laundry and hanging it on the clothesline.
I saw the eastern sky. The eastern sky was very purple, with large black clouds. It was a very scary storm cloud.
After checking it, it rained very heavily and terribly like a water bomb. And suddenly a huge tsunami struck between the east and the south.
All of a sudden, I'm out of my mind. Laundry and stuff, refrigerators and all appliances float on the water in a fraction of a second. I have no mind. It happened so suddenly.
I went out to the yard. Then, I looked up at the sky halfway between the east and the south. There were a few planets to the left of the sun, and some planets to the right. But before my eyes, the planets on the left lined up to the right, and the planets on the right lined up to the left. I was so excited to watch it. Wow! It's really amazing~ I'm looking at it like this, and my body is floating. It's a rapture~ Some people in the family went up and some were left behind. I looked there and opened my eyes.
On June 19, 2018, I saw a vision of planetary alignment. The time of the rapture is very near. A vision and a dream are different. Dream, I can't even remember what dream I had the next day, but a vision can explain as clearly as the dream I had yesterday, even in 10, 20, or 30 years.
This means that the planetary alignment occurs at the time of the rapture. When you see this phenomenon, you can see that the time of the rapture is very close.
The planetary alignment is scheduled for June 15, 2022.
Yeshua is coming very soon.
Prepare for the Rapture. Shalom❤️
Jun 12 2022 Vision for Planetary Alignment (June 19, 2018)
ua-cam.com/video/E4DCYDRSxFw/v-deo.html
Amazing Job! Reminder: please dont monkeying around your pc settings. This video has encoding problems. Chill out.
be careful of using spray without mask, and never use spray in closed places!
Fiberglass sanding should always be in open area with safety masks. THIS IS VERY IMPOSTANT IF YOU WISH TO MAKE IT TO THE THIRTIES WITHOU LUNG CANCER..
And great work building it !!!!!!
I like it , i was excited about one small hull but it was stitch and glue , no frame so it's sort of styling or it needs aluminum , Oh i wonder if it's possible to use the jetski [edit: jet drive] template on carbon fiber , it's small enough to maybe vacuum cure it and all seems like ...oh , another was maybe use it as the inner mold and cast it integral with the hull spars and stuff and fiberglass it thick instead so it's paper template, assembled is the cutaway foam that gets glassed that geometry with the rest of a hull was the other ,,, too long winded nice vids and plans it looks like
On your Homemade Madness site, the shop area mentions Apply Coupon. Where can I find one? I am interested in the inboard version of JetSki package, including the DXF file.
Hello I want to make seabreacher on wood using paper like you did, can you tell me how to do it I have the 3d file for seabreacher, thank you
You should expect a cease and disist letter from Yamaha soon. Copying the hull of the Wave Runner blatantly violates Yamaha's IP, and you sell the design on your website. Consider designing you own hull, if you have the technical expertise to design a jet ski, you should be able to use open source CFD software.
Then just pop down the garden to the river and launch it !!
This video is brought to you by ANOTHER poor little rich kid... Courtesy of mummy and daddys credit card 💃
Hey guy, I want so bad to build this. I have down loaded it and have the plans printed out full size. I would like to modify this as an outboard, to have a partial forward and side upper deck and be a sit in boat instead of a sit on top. Can you do some kind of design modification like that for the upper deck without changing the lower open boat, or should I just wing it myself? ? I am not very computer savvey at 70 years old. Sorry. But as a kid I had a 10 foot boat called a GW Invader with a 40hp on it and was loads of fun. Wanting to have something for a couple high speed runs thru my second childhood. Thanks.
+HOMEMADE MADNESS Hey man, gebruik jij de 3DEXPERIENCE solidworks voor makers of een andere licentie?
Very easy to see. You are not a person who is used to boats. Pull out with a half finished boat. Without floating element inside the hull. Then you have not put on a life jacket. Amateur Santa .... I was born by the fjord. Been in a boat since I was 5 years old. Today I live in my sailboat. Wear a life jacket on it. My boat is 44 feet long. You begin to settle into an unfinished hull. Without any security. So is the recipe for Death. Sorrow. Funeral for your loved ones ....
Wow, this is really a wonderful video content Sir , since I was a kid I was obsessed with boats until now I'm still into dreaming of building one but I can't afford to do it since I don't have much , and then there comes your step by step video of how to create it , and then it gives me an inspiration to maybe try to build it bit by bit , and follow your drawings, instructions,dimensions and as well as your dedication to get it done . I just hope I can have your full or complete boat plan on my working table for in one way or another it could me help build my dreams. God bless you Sir, stay safe and healthy to keep you doing what you do, and inspiring us . It is an honor for me if one of these days you can share me your ideas on my first project. Thanks.
Can u split ur plans, only with boat and full, please
Good and professional job.
Thank you for this video's
Não se põe emenda estrutural em alinhamento direto, mas sempre inverso, causa-se um ponto fraco na estrutura.
De forma que, ex.: A longarina "A" recebeu uma emenda no ponto x/25, a longarina "B" a emenda deve ser feita em x/75.
One question, where or how or why it's look like no dust when you cut the plywood? In my workshop, it's always a mess.... Please help me...
Did you used some kind of vacum?
WE actually built our own set skis in the '80's. Looked a lot like current designs but made of wood and held outboard motors
Great job on those plains, if some one told be they are going to do what you are doing I would think "never going to happen" but I some how think that you can indeed do it...
bstthing ive seen on youtube...i like it the way it is as a boat..mayb jus a lil bigger if you was making it as a boat..cant imagine how much time and work this took...once i get my garage/workshop oraganized i def might buy these plans if the price of plywood is good..but like i said id love if this was just a lil bigger boat..idk if you could adj the plans to make jus the hull bigger
I saw "lijm spray" I knew you were Dutch. We all sound the same talking english xD goeie build man lekker bezig
Nice build but it looks like every other jet ski…. Personalize it!!!!! Hydrofoil jet ski perhaps?!
Hmmmm,youtube didn't notify me of this video nor is it in my subscriptions even though I'm still subbed... Isn't the 1st time this has occured on this channel as well as others...
Vet man!! Heb wel eerder gedacht om een boot te kopen/bouwpakket in elkaar te zetten... en dit komt perfect uit!! Ga de tekeningen bestellen!🤩🤩
👊🏻👊🏻
I appreciate you video but I am sorry to inform you but there is a guy in Vietnam who for years shown how he makes boats and jet skis showing the complete build and rebuilds of trashed engines with hand tools. Very inspirational but not in english and no subs. His cho. I will post a link asap .
I did enjoy and applaud your video and technique I am hoping to sit down and start a project of my own design too.
Install a little tiny engine similar to this in your new Jet Ski! VROOMMMMMmmmm! 😂 ua-cam.com/video/IK_EgKbdUc0/v-deo.html
Your idea for producing wooden boats is great, thank you for sharing
Cool design, just not that efficient. Adding edges/ridges on the bottom and the sides that force water to stay in place or direct downwards would help the boat to rise to plane, specially since you have engine literally sucking water out under it. Faster and least amount of power you need to get it plane, more efficient design is. This tiny boat should have risen to plane in 5meters distance with that 4hp outboard even with all that back biased balance. This one looks cool but needs more power that necessary to skim over the water.
Since wood weights less than metal on those connection points yes use screws to hold them until glue is dried, then remove them, drill hole and hammer in wooden dovel with glue. This removes weight, hold more and you wont run into issue of metal rusting or hitting it if you do repairs or modifications later. For fiber glass i loath full fiberglass cover on wooden frame. Once water gets in, it starts to rot and repairs become really hard. Much rather use polyester resin and saw dust to fill the gaps and coat the bottom with resin. In high use spots like keel, you can add strip of fiberglass to reinforce those particular spots. Also note how water will run over the hull. You want to have the fiberglass be on the sides and the rear and only then apply the center part. This way its layered so if there is ever crack due say collision to rock, yeah water can get in, but if you manage to get it to plane on coming water does not create high pressure zones, but low pressure zones instead ie making it this way prevents separated layers acting as water scoop that makes it even harder to get to plane and force water into the hull. This way you have good chance to get it to speed and run it to shore before it sinks. Small things but something ones buying those plans can easily fix them selfs.
all is good,but man,put a mask when sanding fiberglass filler and anything for that matter,stay healthy and keep up the good work! :)
You are amazing dear .. that's really nice .. but where I can find that sheets for jet ski design 😅😅😅
I wouldn't trust that transom. The fiberglass should continue from the hull onto the transom no less then 6". That is a very very weak joint.
I can't find any printing place that can print those size and I checked most every place in a city size of close to 1 million. Can they be made with actual dimensions?
I have built one too and I was ride in the sea. Engine with suzuki outboard 15 pk. Top speed 31 km /hr
a good alternative for the glue is "grip fill" the toxic version works better but use in ventilated area.
I seen your thumbnail and I thought you were making a Yeezy WaveRunner... #ClickBait
i have a 4x4 cnc could you make plans for a 4x4 jet ski cut out i know it would probably be smaller but i think it would be fun to make.
I AM INTERESTED IN BUYING YOUR PRODUCT, BUT CAN I ORDER WITH CUSTOM SIZE 4M LENGTH, 1.3M WIDTH
This channel is awesome I can’t believe it hasn’t caught like wild fire with the subs yet
Thanks!🤷🏼♂️
Lekker bezig, mocht je een betere hechting willen op het hout dan zou je als primer G4 kunnen gebruiken is 1component. Na het aanbrengen kwartietje laten intrekken en dan plakt heel het opperplak. ook makkelijk op plekken waar je ondersteboven moet lamineren, gr
First so-called "jetski" without a jet engine. You should rather call it a no-jetski...
you could build the frame with styrofoam, The fiberglass is the strength. you need at least 12 more layers of fiberglass.
Please use a proper mask while dealing with fiber glass, you still have 50 years to live young man.
that's alot of work. why not build a polystyrene base with some wood for a motor mount/jet platform and eliminate the weight of wood? then fiberglass the body.
Please how did you get the plan on your computer. Please i want to make one for myself but I don't know how to go about the plan drawing help please
The entire point of a Jet Ski is the jet drive, for safety of the rider and other people. Using a propeller driven outboard is ridiculous.
I want to buy the polyester …at 20：45.What's it? Thank you
I smell some dutch language, but yo if u dutch, Echt vet gedaan, and if ur not dutch, U did a nice job!
Like this,tq gaiss,show the conten,mini boat wonderfull,good job,
Ik ruik Nederlands!
toffe video, subscriber dr bij :D
А руССкий военный корабль крейсер москва нах пошол на дно)Отличноеместо для дайвинга)
bro.can your send me the description your jet ski.i want build.jet ski bro..please
GOOD JOB MAN I AM WAITING FROM YOU A NEW PROJECTS !
hmm... sanding fiberglass without a mask. Don't try that at home folks.