Thanks for the order!! It just got wrapped up and will be leaving first thing in the morning 😁 have fun on the install! Just drilling holes upside down is crappy otherwise it’s very easy and quick!
That's the first thing I did to my krx when I bought it two years ago. I got mine from full access UTV. Second thing I did was took off those mud scrapers on the calipers. Rocks get stuck in between there and tear up your wheel. And now it has a Super ATV half inch skid plate from front to rear right on the top of that steel plate. Along with Factory trailing arm guards
Using bolts on those 2 back holes was smart, the model I installed used nuts and machine head screws and getting my hands in up top to hold the nuts was a huge PIA!! Love the content by the way, keep up the good work!
Agreed. That is one of the first things i did as well. Sure enough the extra plate I put on has visible marks of a good impact or 2 that most likely would have punched through the stocker. Good vid!
Men see with their hands from early teen age lol, called special ability. Is there a possibility to have thicker than 1/8 and would it be any benefit, also what type of steel is used for your product, I’m guessing mild steel, would it be better to use carbon steel quenched. I’m not experienced, just throwing my thoughts out there.
If someone is extremely hard on their machine we can laser cut thicker material no problem, we use pickled and oiled mild steel having that added under the factory welded on skid you end up with 3/16” of steel which is pretty stout! On top of that many folks than go and add the 1/2” UHMW skids as well for even greater protection
Yes Steve machine the rack is smoked from the offset wide rims putting a lot of stress on it, we have a brute performance rebuild kit but are yet to install it
Camera man knew the assignment😉
That joint is PHAT isn’t it lol … every video
Just watched your video…..great job BTW! Just ordered the skid plate……now I’ll find out if my wife, Mel (aka Melisa with 1 S) can install this plate.
Thanks for the order!! It just got wrapped up and will be leaving first thing in the morning 😁 have fun on the install! Just drilling holes upside down is crappy otherwise it’s very easy and quick!
Yes you do. More protection.
That's the first thing I did to my krx when I bought it two years ago. I got mine from full access UTV. Second thing I did was took off those mud scrapers on the calipers. Rocks get stuck in between there and tear up your wheel. And now it has a Super ATV half inch skid plate from front to rear right on the top of that steel plate. Along with Factory trailing arm guards
Holy half inch eh! That should keep everything protected.
Using bolts on those 2 back holes was smart, the model I installed used nuts and machine head screws and getting my hands in up top to hold the nuts was a huge PIA!! Love the content by the way, keep up the good work!
Just ordered my skid plate! Can not wait to get it and get installed. Really appreciate all the quality content!
Awesome! Thank you! 🙏
Agreed. That is one of the first things i did as well. Sure enough the extra plate I put on has visible marks of a good impact or 2 that most likely would have punched through the stocker. Good vid!
Hey guys speaking of the skid plate fit perfect very nice and heavy duty thanks again for the peace of mind
So cool you 2 are love the interactions.
Thank you for the content you two, much appreciated here in Arizona!
Thanks for watching!!
Men see with their hands from early teen age lol, called special ability.
Is there a possibility to have thicker than 1/8 and would it be any benefit, also what type of steel is used for your product, I’m guessing mild steel, would it be better to use carbon steel quenched. I’m not experienced, just throwing my thoughts out there.
If someone is extremely hard on their machine we can laser cut thicker material no problem, we use pickled and oiled mild steel having that added under the factory welded on skid you end up with 3/16” of steel which is pretty stout! On top of that many folks than go and add the 1/2” UHMW skids as well for even greater protection
Have you had any problems with to much play in the rack and pinion. I have a horrible death shake.
Yes Steve machine the rack is smoked from the offset wide rims putting a lot of stress on it, we have a brute performance rebuild kit but are yet to install it
@@d3offroad that would make another great video, not much out there as far as steering upgrades go.
How did you blow up a motor by washing it?
It just happened to bend the rods in his ultra 4 after I washed it 😂 so now we leave the detailing up to Steve.
Which kinda of hitch is that? It doesn't look like it bolts to the suspension
The hitch on that machine is dragon fire
Will it fit the Krx 4?
We haven’t put one on a KRX 4 yet but it should! If it doesn’t fit you are welcome to return it.
It fit perfectly, thanks !
What tires are those on your krx ?
MotoRavage XL’s in 35’s
@@d3offroad great thanks
What kind of tires are you two running on the KRX?
Motoravage XL 35”