- 114
- 460 270
D3 OFFROAD
Приєднався 12 тра 2019
D3 Offroad is a husband and wife, into anything that gets us outside on a trail!
SXS/UTV's, Jeeps, Ultra 4 racing, overlanding, fabrication, suspension tuning.
After years of driving, modifying and building a variety of offroad vehicles,
we have decided to start sharing our adventures and experience with you.
Hope you enjoy, and thanks for checking us out!
Dixie appreciates it.
See ya on the trails!
SXS/UTV's, Jeeps, Ultra 4 racing, overlanding, fabrication, suspension tuning.
After years of driving, modifying and building a variety of offroad vehicles,
we have decided to start sharing our adventures and experience with you.
Hope you enjoy, and thanks for checking us out!
Dixie appreciates it.
See ya on the trails!
Building An EPIC Overland RTT Trailer | EP 1
We start the building of our Rooftop Tent Offroad Trailer. In this episode we cut the metal for the chassis and get it tacked together. Follow along to see how it comes together!
#rooftoptent #rooftoptenttrailer #offroadcamper #overlanding #Fabrication #overland #overlandcamping #camping #campingequipment
#rooftoptent #rooftoptenttrailer #offroadcamper #overlanding #Fabrication #overland #overlandcamping #camping #campingequipment
Переглядів: 845
Відео
Ultimate SXS Spring Set-up Guide
Переглядів 1,5 тис.14 днів тому
Learn how to set up your springs on you Side by sides coilovers. learn about spring weight, setting cross over rings and setting your preload. #sxs #offroad #kawasaki #canam #polaris #cfmoto Chapters Spring Rate - 1:47 Crossover Rings - 4:25 Preload and ride height - 11:21
Ultimate Overland Setup: 6 Monkeys Low Profile Roof Rack & Rooftop Tent on Grand Cherokee WK2
Переглядів 87621 день тому
We install the 6 Monkeys Low Profile Roof Rack for our Body Armour Sky Ridge Tent. #grandcherokee #rooftoptent #overland #review
FIRST LOOK at TMR Customs MACHETE XL!!
Переглядів 774Місяць тому
Opening and figuring out how to use the Machete XL by TMR Customs for flat and round bar. Check them out at www.tmrcustoms.com #fabrication
MAY 24 LONG WEEKEND!! Exploring South Algonquin
Переглядів 3,4 тис.Місяць тому
The crew gets together to explore a new part of Ontario. Come along for the ride Harmony Resorts - South Algonquin harmonyresorts.ca/south-algonquin/ Check out our website!! www.d3offroad.com #krx1000 #offroad #canam #kawasaki #sxs #adventure #explore
Our Offroad Shop Tour. D3 Offroad Compound!!
Переглядів 2,1 тис.2 місяці тому
Walk around the shop and what we currently have in it. Comment below on what your favorite part is! Check out our website at www.d3offroad.com. #offroad #fabrication #fabricator #mechanic
Installing SICK Custom Barrett Hepburn Vinyl Wrap on KRX 1000!
Переглядів 3,4 тис.3 місяці тому
Mel's KRX gets a sweet new custom wrap designed by Barret Hepburn. Do you love it as much as we do??? #krx1000 #review #custom #installation
How To Install Schrader Valve on Stock Reservoir Cap
Переглядів 2,5 тис.4 місяці тому
How To Install Schrader Valve on Stock Reservoir Cap
TOP 5 Signs of Wear To Watch For On Your Coilovers
Переглядів 4,2 тис.4 місяці тому
TOP 5 Signs of Wear To Watch For On Your Coilovers
How Do Live Valve Internal Bypass Shocks ACTUALLY Work??
Переглядів 1,7 тис.4 місяці тому
How Do Live Valve Internal Bypass Shocks ACTUALLY Work??
Rock Crawling IN THE SNOW!! KRX 1000 and Can Am X3
Переглядів 3 тис.4 місяці тому
Rock Crawling IN THE SNOW!! KRX 1000 and Can Am X3
KRX 1000 Brute Performance Steering Rack Rebuild
Переглядів 1,2 тис.5 місяців тому
KRX 1000 Brute Performance Steering Rack Rebuild
Can Am Maverick Sport XRC Get Shocks Tuned!
Переглядів 3,7 тис.5 місяців тому
Can Am Maverick Sport XRC Get Shocks Tuned!
Coolest Roll Cage I've Built Yet!!
Переглядів 3,6 тис.5 місяців тому
Coolest Roll Cage I've Built Yet!!
SMASHING Snow Drifts in The KRX 1000!!
Переглядів 4,3 тис.6 місяців тому
SMASHING Snow Drifts in The KRX 1000!!
Rugged Radio GMR2 vs GMR2 PLUS Range Comparison... THANK YOU FOR 1 YEAR!!
Переглядів 6 тис.6 місяців тому
Rugged Radio GMR2 vs GMR2 PLUS Range Comparison... THANK YOU FOR 1 YEAR!!
KRX 1000 Interactive Display Walkthrough and Review
Переглядів 4,2 тис.6 місяців тому
KRX 1000 Interactive Display Walkthrough and Review
Do You NEED KRX 1000 Transmission Skids??
Переглядів 7 тис.7 місяців тому
Do You NEED KRX 1000 Transmission Skids??
STUNNING Views on The Rockhouse Trails in West Virginia!
Переглядів 4,6 тис.7 місяців тому
STUNNING Views on The Rockhouse Trails in West Virginia!
2023 KRX 1000 ES REVIEW... Is The Live Valve Worth The Extra $$$?
Переглядів 9 тис.7 місяців тому
2023 KRX 1000 ES REVIEW... Is The Live Valve Worth The Extra $$$?
AuxBeam 8 Gang Switch Install and Review... Is It Really THAT Easy???
Переглядів 13 тис.7 місяців тому
AuxBeam 8 Gang Switch Install and Review... Is It Really THAT Easy???
BRAND NEW KRX 1000 Overland Styled Cage!!
Переглядів 4,5 тис.7 місяців тому
BRAND NEW KRX 1000 Overland Styled Cage!!
Can We Make It Through Trail 73 Without Rolling??
Переглядів 4,6 тис.8 місяців тому
Can We Make It Through Trail 73 Without Rolling??
Riding Bearwallow DOUBLE BLACK Trail 46!! KRX 1000's and Can Am X3
Переглядів 1,8 тис.8 місяців тому
Riding Bearwallow DOUBLE BLACK Trail 46!! KRX 1000's and Can Am X3
COILOVER INTERNALS 101.. How do they work??
Переглядів 2,9 тис.8 місяців тому
COILOVER INTERNALS 101.. How do they work??
Riding BearWallows DOUBLE BLACK Trails 71 and 79!! KRX 1000's and Can Am X3
Переглядів 3,8 тис.8 місяців тому
Riding BearWallows DOUBLE BLACK Trails 71 and 79!! KRX 1000's and Can Am X3
KRX 1000...Is It REALLY Spring sag?? Coilovers Explained!!
Переглядів 19 тис.8 місяців тому
KRX 1000...Is It REALLY Spring sag?? Coilovers Explained!!
King Boss Quads MASSIVE Can Am X3 Comes in For a Suspension Overhaul!!
Переглядів 1,4 тис.8 місяців тому
King Boss Quads MASSIVE Can Am X3 Comes in For a Suspension Overhaul!!
Smart end of the tape and dumb end. I've been fabricating for over 50 yrs. and have never heard that one. LMAO!
Awesome video!
Great video, thanks for sharing. Can’t wait to see more electrical installations using the switch.
I can't wait to watch this build series!
Pneumatic chamfer tool! Huge time saver!
Came over from Facebook!!!!
Thanks for checking us out!
Especially to keep your strength. After any welds get grounded down You guys did a fantastic job on that. It looks freaking great hats off man.
I would have probably put plates on those loom bars that go up to the. Itch itself for crazy idiots like me. you never know when somebody thinks they can jump with the trailer on the back or something lmao For heavy applications might as well plate it before we break it
Well done!! Frickin Beautiful . Built tough af too
I'm definitely following this project! I'd like to do the trans america trail one day soon.
That is one of our bucket list items as well!
Good stuff. Enjoyed the next level tech. More of it please.
great video .Im still on stock springs ,love the videos you make it easier to try and understand shocks and springs.thanks
We just got done with Rockhouse this past weekend, will most likely go back again. Was the waterfall you saw at the end of 13? We actually came across one on 31 which was very different. We used On X Off-road for mapping. It provides several viewing options including a 3D view. Would love to know the full path you took, trail tp trail. And after watching this video we might just have to hit trail 94, going down. We have not tried a double black yet.
Another subject, you guys ever do a video on how to replace the front axles? Having issues doing it myself. Thanks!
The front axles should just pop right out once you take tire brakes and hubs off! We haven’t done a video on it though
You're banner in the shop says it all..."crawling is boring". 😂🤭 Great video, pretty crazy angles. Thrill seeker trails. Baraga Mi. area mid September if you guys are interested. Its nothing like these trails. Good times though. Thanks for the videos. 🍻✌
That is the best cage I've seen! Want!
Thanks!!
Great job
Thanks!
Do you ship cages? Looking for on for a 24 krx 2 seater based in Indiana
Yup we can it just costs a decent amount due to size and weight
What considerations need to be made for driver and passenger weight. and rear cargo weight? Really appreciate the videos!
You will want to setup your preload and spring rate according for all of that weight so if you have springs on your car and you know their weights measure their length with people in the car and gear loaded up to see if you get the desired ride height that 1-2” of preload. If you need to run 3-5” of preload with that weight added you need new springs
@@d3offroad Thank you!
So if a person was only rock crawling/slow technical trail riding would you want taller and softer springs??? Very interesting video I like how y’all post this kinda stuff!!
Personally no, I would still want correct length and rate because when you go taller softer spring you need to add more preload to achieve the same ride height… springs are not intended for a soft flexy feeling that is achieved with valving the springs job is to support the weight above it without to much preload
@@d3offroad well said. Honestly it really makes sense now that you say that! That’s why we like your videos and the information you provide!! 🍻
Awesome video! Very informative.
Astonishingly informative! Thanks for the education! But I have a question: I now know the importance of the nitrogen pressure but does nitrogen volume come into play in any way? For instance, there are extended "High Volume" reservoir caps on the market for x3s. Thanks!
Volume does come into play more so on smaller resi shocks the x3 has massive resi and it’s also more important in say desert racing for long periods of time where you can get shock pump from pressure rising due to heat, for the average rider who takes breaks to hang out every hour it is not really needed the shocks always cool off
Killer vid you guys, so much useful info in less than 30 minutes... First vid I've saved in a while for future reference. Thanks for the content! 🏁🏁 p.s. please add the XL/XXL flex fit option for your hats!
What spring company do you recommend for the krx
Eibach springs or MTS or Schmidity are all our go to choices for quality springs
amazing I just found your vid on the tube I seen your symbol on the machine So i knew you built it so cool and then realized it was you So i am getting into overland with the tacoma So maybe will see ya on the trail keep up the good work Cheers
Another great video. Thanks for these 🍻✌
Sometimes the background music becomes too much. But, otherwise, great content. Seems like more and more folks are running those amazon mirrors..They change names now and again but, great for the money. And if you trash them (hard to do)...you can replace them for next to nothing. Here in the eastern US woods, that's key, as these woods are tight, and everywhere. Great that you two are a love-bonded team, off-road. I think it's the key to a lasting relationship. My wife and I started this stuff all the way back at the ATC 3 wheelers...yep, we're now old. We've gone from 250R racers to the Rmax and KRX trail. Just recently ran that Rmax off a switchback in Appalachia...time for shoulder and elbow repair, but, do you think I'm done?...nah. My wife chomps at the bit to get out here. Loves the off-road as much as I do, and so I expect that as long as fate supports it, we will be out here well into our 80's. This KRX suspension more than guarantees it! Keep being your team, and keep sharing the experience. We live in a perfect age, where comfort/technology and rough-hewn, gel, for the ultimate life! Enjoy every minute! You folks are fun!
Would you happen to know the spring rate of the all things utv tender springs? I’m running factory lower springs and those tenders. My krx will beat you to death at any speed. Any help would be greatly appreciated.
I do not I would need to buy a set and put them on the press and measure them but I can say the doing internal valving will greatly increase the comfort of the ride
Man thanks a lot Steve I been waiting along time for this tech talk thanks buddy appreciate you guys
Very nice man, I followed along pretty good. I do my own shocks as well but I never understood the math, I just know what it needs or doesn't by driving it and adjust from there, (not very scientific) so it's cool to get the technical explanation. Can't wait until the next one! 👍
Thank you for this video. He helps me understand more how to set things I will get together with my son and we will do some more adjusting to make the KRX ride like we like. Thank you keep up the good work.
Thank You, I did learn a lot which would seem counter intuitive. I wish my machine had more than just a single spring to work with but spring prices here in Canada are plain ridicules!
Shoot us an email maybe we can help get you some setup better 😎
I’ve been toying with the idea of rebuilding my friends shocks so I’m geeking out over this video
Glad we can help!
lookin good!!
What did you guys use on the schrader valve threads for sealing?
Our valves come with sealant on the threads already!
Nice add on!
Great set up and strong product. Big salute @sixmonkey🫡
Great video guys! Happy to help! We love building products that enable adventurers and life long memories!
Thanks for all the help !
I love what you did for my shocks and how you set it up and and it was well worth the time and effort in the money and I’m thoroughly thrilled with him. Thank you thank you thank you.
I think it's 70$ to get your license. And a call sign. You can speak or use Morse code. Is there a button to hit for your call sign?
I’m looking at them now, the engine noise is really a issue for me😢
They are not very quiet that’s for sure! I think the can am have the smoothest and quietest motor of all the brands
I’m between the x3 and the krx
So do I understand correctly you guys sell these mufflers and how much would it cost to have you send one here to Utah? It’s a Douglas young you did my shocks or what be the best way to get one of these to me?
So they make you helmets?
Would like to see you guys promote some. Digital radios Japanese radios would be interesting to see. Used in the field....
Why not just buy the Maverick R ? It came with all those extra from factory
Help put a price tag on the muffler and where you can get it
On our website! d3offroad.com/products/ggb-2020-2023-teryx-krx-1000-stainless-steel-muffler
Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2024 CF moto Uforce 1000XL
Tidradio looking
Your Repeaters for GMRS
So this machine comes stock with all of that!? Where I just built a maverick x3 and spent over $5,000 adding these options!!? Fuck that, I think I’m going for Kawasaki now.