Maybe include torque specs next time? For someone who hasn’t installed a HPFP before and they’re looking for a one stop tutorial it would be nice to have all the info in one vid
Hi 👋, I’m going to fit a pure 800 I have a TU pump would I get any benefits fitting a stage 1 dorch pump , I’m only getting a 99 Ron tune , I’ve read the dorch pump gives more midrange power
@@kern417 ok thanks , seen this too late and already bought the dorch , never mind 🤦♂️. At least I have the safety of over pressurising the fuel system 🥳
Hay mate just a quick one i got a 2019 m140i just done a decat and loaded a bootmod3 stage 2 but when i take it out and put my foot down it takes off then a drive chain fault appears . can u do a cat delete and leave the gpf filter or have you got to change that too ?
@@kern417 I did that when I had stage 2 on bm3 and it still persisted. I’m on a custom tune now and I haven’t heard it since. But all the issue was is that it would vibrate against the plastic engine cover creating the noise, so it was nothing serious.
Pro Tip: remove your coil packs and removing/installing the hard lines is a snap. If you also happen to be replacing your plugs, get at least Cylinder 2 in placed and torqued down prior to installing the LP line. The elbow connector interferes.
@@kern417 I’ve got bolt ons but my karbahn tune is likely very mild I’m thinking I need to switch to MHD stage 2 and get a Supra pump. Should gain a decent bit of power to go with my catless/exhaust/intake setup. ❤️
DIY starts at 2:26
Excellent details on the install
Great video! Unrelated question. Is it possible remove and install bank 2 injectors 4, 5, 6 without removing the strut brace?
No
Maybe include torque specs next time?
For someone who hasn’t installed a HPFP before and they’re looking for a one stop tutorial it would be nice to have all the info in one vid
What kind of benefits do you get from going from TU to Dorche? Do you recommend a Dorche for a stock turbo gen1 B58?
The primary benefit is more flow. A TU or Dorch Stage 1 is plenty for a stock turbo B58
@@kern417 Thanks bro! Keep it up, your videos are a life saver!
Can my dealership remove the coil right next to the pump, without removing the pump itself in case of maintenance?
Awesome Video, thx a lot :)
yes it can bend around it
Hi 👋, I’m going to fit a pure 800 I have a TU pump would I get any benefits fitting a stage 1 dorch pump , I’m only getting a 99 Ron tune , I’ve read the dorch pump gives more midrange power
Not really
ua-cam.com/video/umBBvELZTwg/v-deo.html
@@kern417 ok thanks , seen this too late and already bought the dorch , never mind 🤦♂️. At least I have the safety of over pressurising the fuel system 🥳
Great video
Hay mate just a quick one i got a 2019 m140i just done a decat and loaded a bootmod3 stage 2 but when i take it out and put my foot down it takes off then a drive chain fault appears . can u do a cat delete and leave the gpf filter or have you got to change that too ?
You should be ae to do one or the other. Scan for codes
Hey! Will my TU pump be enough to support VTT GC turbo? 1st gen b58.
The TU pump can support 550-600hp on an ethanol mix. If that's your goal, yes.
I have the stage 1 on my b58, if you use an ots tune it’ll make a weird noise at idle/low Rpms it goes away with a custom tune tho.
Just select the correct hpfp settings and it works fine
@@kern417 I did that when I had stage 2 on bm3 and it still persisted. I’m on a custom tune now and I haven’t heard it since. But all the issue was is that it would vibrate against the plastic engine cover creating the noise, so it was nothing serious.
Pro Tip: remove your coil packs and removing/installing the hard lines is a snap. If you also happen to be replacing your plugs, get at least Cylinder 2 in placed and torqued down prior to installing the LP line. The elbow connector interferes.
None of that is in the way
Wow that’s not hard at all now I wanna upgrade my pump lol.
Do it 😈
@@kern417 I’ve got bolt ons but my karbahn tune is likely very mild I’m thinking I need to switch to MHD stage 2 and get a Supra pump. Should gain a decent bit of power to go with my catless/exhaust/intake setup. ❤️