Andy the UA-camr! Look at you doing a legit Review! I really need to get something like that setup in my homemade camper trailer! Another summer project I guess!
just like your furnace at home, the chamber can form cracks. Esp with it being in a vehicle and bouncing around. Not to mention, Chinese welds are not known to be the best. I would recommend putting a Co² detector in there. You can get one for an RV, that would work. Even though you put the work into sealing up the hole underneath, you still have to be careful that the chamber does not crack and allow Co² to mix in with the heat and kill you. JMO!!
I elevated my diesel heater and exhausted through the bottom of the passenger cubby/storage in the box to avoid drilling out the main area, I couldn't do the big holes in my bed like you did I was too afraid, I like your install tho it's legit bruh
This was a great review with all the info that I needed. I will be doing the same install as you in my tundra. Thank you so much for this helpful video. ❤
Might have to get one of these, can it be mounted against a vertical surface rather than flat on the floor like that? seeing this i was thinking of installing it on my wheel well.then run the exhaust right with my vehicle exhaust.
Thank you. Check back in the next couple days. I’ll try to have that information up. I uploaded this on the road and I ran out of time. All were purchased from Amazon or eBay. I’ll post links.
Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting company for nearly 20 year and we're looking forward for doing sponsorship with you!
hola jamas coloques codo de 90 grados en salida de calor porque se devuelve el calor y puede estropearel calentador...se recomienda dar un metro de linea recta y despues puedes colocar codo ok.
Mixed reviews are typically a sign of bad quality control , either at the manufacturing end or the consumer end . And since this product is from China , and , requires some fabrication ability and attention to detail , I am not at all surprised by less than stellar ratings owing to mixed reviews . The problem with idiot proofing is that idiots are constantly evolving and develop immunity to common sense , faster than cockroaches develop immunity to pesticides . Anyway , awesome video . Be nice if they made a 1Kw heater , since the 2 -2.5 Kw units are really overkill for a full size pickup with a canopy , and unless you are camping in arctic conditions , you will likely keep yours at the lowest setting . This exacerbates carbon buildup in the unit unless you run it full blast for 10 minutes every time before you shut it off for the day .
A lot of truth here. I would agree most diesel heater problems are an installation error. And you’re right - even a 2kw can be overkill for a pickup but it’s the best solution I’ve come up with. A buddy heater is way too warm, too quick. A constant cycle of turning it on and off. At least the diesel heater on low is semi regulated. Thanks for watching.
Is it just me? But I don't think I saw your battery power source? Vehicle battery? Extra battery? Where ? Thanks for the straight forward helpful information!!
thanks for this
Very professional instal and talk. 👏👍Thanks.
On a side note I have to give you big props for being a legit Fabricator as that in of itself is a Skill that I can respect!
Thanks my dude!
Andy the UA-camr! Look at you doing a legit Review! I really need to get something like that setup in my homemade camper trailer! Another summer project I guess!
I’m no UA-camr. I dabble lol
just like your furnace at home, the chamber can form cracks. Esp with it being in a vehicle and bouncing around. Not to mention, Chinese welds are not known to be the best. I would recommend putting a Co² detector in there. You can get one for an RV, that would work. Even though you put the work into sealing up the hole underneath, you still have to be careful that the chamber does not crack and allow Co² to mix in with the heat and kill you. JMO!!
I elevated my diesel heater and exhausted through the bottom of the passenger cubby/storage in the box to avoid drilling out the main area, I couldn't do the big holes in my bed like you did I was too afraid, I like your install tho it's legit bruh
I didn’t like cutting a hole that big either but here we are ha.
Thanks for watching
Great review and some good tips… thank you.
This was a great review with all the info that I needed. I will be doing the same install as you in my tundra. Thank you so much for this helpful video. ❤
Thank you for the review. Great idea on the camera box. I’m thinking on putting a diesel heater in my camper Van project. 👍👍
I love your solution to these problems. Thank you for the content
Thanks for watching.
Very nice content. You have earned another subscriber. Hoping for more videos.
Thanks for watching. Much appreciated
That is an excellent setup thanks for the review I would purchase that brand
Thanks for watching
Another great video Andy!!
Thank you
Keep up the good work
Thank you!
Might have to get one of these, can it be mounted against a vertical surface rather than flat on the floor like that? seeing this i was thinking of installing it on my wheel well.then run the exhaust right with my vehicle exhaust.
You have a wonderful build! What size flatbed 23 Tacoma is this?
Great content! Question, where did you get the turret plate, tank and elbow? Thanks!
Thank you.
Check back in the next couple days. I’ll try to have that information up. I uploaded this on the road and I ran out of time. All were purchased from Amazon or eBay. I’ll post links.
Links are up.
Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting company for nearly 20 year and we're looking forward for doing sponsorship with you!
hola jamas coloques codo de 90 grados en salida de calor porque se devuelve el calor y puede estropearel calentador...se recomienda dar un metro de linea recta y despues puedes colocar codo ok.
Can you put that pump under the car?
Why have the pump diagonal instead of of horizontal or vertical?
What brand and model is the camper top that you have? The truck cap however you want to call it
It's a Snug Top brand. Model is a Highliner. Thanks for watching.
Mixed reviews are typically a sign of bad quality control , either at the manufacturing end or the consumer end .
And since this product is from China , and , requires some fabrication ability and attention to detail , I am not at all surprised by less than stellar ratings owing to mixed reviews .
The problem with idiot proofing is that idiots are constantly evolving and develop immunity to common sense , faster than cockroaches develop immunity to pesticides .
Anyway , awesome video .
Be nice if they made a 1Kw heater , since the 2 -2.5 Kw units are really overkill for a full size pickup with a canopy , and unless you are camping in arctic conditions , you will likely keep yours at the lowest setting .
This exacerbates carbon buildup in the unit unless you run it full blast for 10 minutes every time before you shut it off for the day .
A lot of truth here. I would agree most diesel heater problems are an installation error. And you’re right - even a 2kw can be overkill for a pickup but it’s the best solution I’ve come up with. A buddy heater is way too warm, too quick. A constant cycle of turning it on and off. At least the diesel heater on low is semi regulated.
Thanks for watching.
Is it just me? But I don't think I saw your battery power source?
Vehicle battery?
Extra battery?
Where ?
Thanks for the straight forward helpful information!!