Rear Black Bowtie Replacement Chevrolet Silverado 2017
Вставка
- Опубліковано 26 сер 2024
- Rear black bowtie replacement from OEM Chevy gold to black
Amazon - Black Bowtie Set
amzn.to/2LCkvnf
Amazon - Black Bowtie Set - 2016-2018 SIlverado Version
amzn.to/39maIZL
Decal remover - Amazon
amzn.to/2Kw994L
I put this on my 2017 Chevy Silverado 1500 Texas Edition. Same logo is also on the 2014, 2015, 2016, 2017 and 2018 Silverado's.
do you have the link to the adhesive remover wheel?
amzn.to/2Kw994L
Link attached for you and adding to description. Thought it was already listed. Thanks and happy holidays
Your video tipped the scales for me. I was all set to order black bow ties until I saw the rear was adhesive tape. You made it look easy enough. The fishing line was a nice touch. Thank you.
I’m glad I found this video a month after I bought the bowtie. I ended up having a replace my tailgate so now that I have my new one installed I’m ready to tackle this. Just got my tape all down getting ready to start. Thank you brother can’t wait to see what it looks like on my truck.👍
Thanks, helpful video. Placing the tape first is a good idea- then you have the precise location when you re-apply.
Great video. I left Goo gone on for 30 mins. and credit carded the black glue. Thank you again!
theshadowtalks yup that’s my routine and works best and scratch proof
Great option for sure. Reminds me that I need to stock up as we are out. Thanks
Thanks for this video too - especially the one previously on the front bow tie .. but this back one scares me to be honest.. I'm afraid I'd never get all that adhesive off before sticking the new one on .. !
Priv Info it is worse than it seems. I should I have pulled off bigger bits first. Goo Gone will take it all off though. You just don’t need as much tape as I used. I’d change that if I do it again for someone.
thanks for videos AWESOME im going do my truck this weekend i check at local dealership here in tennesse they want 350 buckles i said are u f g crazy!
For anyone squeamish about pulling the back one, just get some 1 or 2 mil plastic sheeting and masking tape. mask off the back of the truck with the plastic and painters tape on the chrome. Then spray it with 2 coats of primer and 2 coats of gloss black in a shady area where nothing is likely to fall on it. That's what I did, and it was quicker than this method. Though I imagine it is a bit more expensive than a new bowtie and whatever you spent to remove the old adhesive.
Ya I got something easier and cheaper way…
It’s called
Plastidip😂😂😂
$10 can and done
Mask around the bow tie like in video… spray a light coat evenly left and right… wait 5 min
Repeat about 4 times
And done
Peel excess around the bow tie carefully and away from it and done…
ok.@@B_HarTz
@@B_HarTz ok.
I bought 3M black cabon fiber tape off of amazon,( it comes on a roll like Xmas paper). Cut out a piece bigger than the emblem and put it on, and cut around the edges with a exacto blade. Looks way better than the matte black in my opinion and you get to keep the good stock adhesive.
👏🏽👏🏽👏🏽👏🏽 both of your videos are really helpful and made it easy for me, thanks for taking the time to post it 🙏🏽
Appreciate the kind words and so glad they helped you. Cheers
I would just leave the rear emblem off, just replace the front one. Nice vid.
And look like every Chevy truck on the road?
No thanks, I’ll do this in the video or buy a nice solid gloss black one . Looks way better with a bow tie on it then a big ass black tailgate l😂😂😂
Good video. The front looks easy enough to replace, but that rear one with glue (what were they thinking??) gives me heartburn. On the fence about doing it myself. May have to call the dealer just to see... (my Avalanche is similar)
HEARTBURN 🤣
Awesome video, I was able to get my rear Malibu bowtie off with a credit card
I personally like the gold ! I did put white overlays on my white 06 Tbss though
I have a gn with gold welds as u can see in my avitar lol and a 89 tta all were white I put gold welds on it also
Video was very helpful thank you and you were right that glue ain’t no joke
Glad it helped! The glue was a beast. How’s the new emblem look now? Glad you changed it?
Thanks for this vid - Dealership wanted $150 just for the install!
Ronald Hillstrand that is craziness. Glad this helped
Yeah did my own finally!
If you order the black ones with your truck ( to be dealer installed ) it now coats $295, right on the window sticker, for both front and rear in February 2023 - PURE GREED by GM !!!
@@chadmark88 That NUTS - I got mine pretty cheap and did the install myself thanks to this video!
@@ronaldhillstrand9797ya I was gonna order oem chevy center caps and they wanted $200 e😂😂🎉 looked on eBay and found them for less then $50 . I would stay away from dealerships and even do your own oil change. I started doing mine when I noticed my oil was dark and low and when I drained the oil, 3 qts came out instead of the usual 6 qts that’ it needs and last person who touched my truck was Chevy dealer for the oil change … never again and been doing my oil changes ever since on all my cars
You made that look easy. Nice job
Wait I have 2017 Silverado so its adhesive? Its not like the others where it can popped off?!!! ......... Ughh great I just bought some.
I took all the letters off my Silverado. I feel like it looks much better. Now I’m just waiting on my black bow tie emblems to come in from china. Not paying $150 for OEM replacement when I can get the same part from china for $35.
Yeah some nice new sets are coming out of there. I’m grabbing one off eBay for my wife’s Tahoe
Do you know is the Chevy Colorado tailgate bowtie the same as the Silverado and glued on I’m looking to replace it with black one
Did you have any issues with the new emblem sticking on to the car after it was added on?
None. The 3M adhesive is extremely strong. You can wipe with rubbing alcohol and let dry to prepare your surface better after you remove old emblem
Is this the same for 2010?
Is this the same for a 2010??
Simply beautiful
Just in time for me to get mine done.
Can this also be done with the bow ties of a malibu?
Yes if it has glue or adhesive. You should be able to do the same with any dealer emblem they stick on the rear or car too
I would actually leave the back emblem off, looks cleaner that way
That pad you used, could that take the paint off the vehicle if not careful?
Andrew Munoz yes these rubber wheels can cause havoc but as long as you keep moving you should be ok
Link where u got good Quality bowties & did the rear stick with no problems???
Link is in description and they are the OEM ones :) rear stuck with no problems and is still attached. We have extreme heat in the summers and no issues at all.
Wat about the ones they sell on eBay. For half the price. Any good???
@@sarafineestrada1187 I have no knowledge of them sorry. Unless they are the OEM specs I can’t say if they will hold up.
I read reviews on the rear bowtie coming off because of the adhesive. Is your rear bowtie still on?
Yep still on and looking good. No issues with adhesive whatsoever. I’m also in South Texas where the summers are unforgiving :)
Is the tailgate smooth under the emblem? I just got a black 17 and just want the emblem gone. TY.
Yes it’s nice and smooth. No indents so going “blank” will help keep that clean look. Cheers
Can I buy ur gold bowtie I like it way better 👍👍
great job thanks for help
Hey what's going on brother do you happen to have a link I am looking for the same exact size bow tie for my tailgate and color as well black online they are not telling me the size
Joey Joe I have a link in my description from Amazon. You can also get them at dealer or a few other places online.
@@ScouserTech awesome thank you dude
Joey Joe You’re very welcome also check craigslist there any of your local resale apps as I was able to snag one for cheap on craigslist
looks better and was easy
Joe DeVitto thanks Joe. Looks way better doesn’t it?
What was that pad you used to get that adhesive off
I used an eraser pad
Bought on Amazon
amzn.to/3U4Q0VC
@@ScouserTech thank yewwww!!
@@YSiggy13 you are very welcome. Good luck
nice vid brother!
I saw these on Amazon as a front and rear set for $129.97 in black. I can't find pink. Can I buy a good shiny spray can in pink and color them? With using the boarder blue tape to not get the chrome painted??
Yes you can paint it just make sure you put a nice clear coat over it to protect your pink paint. For the front emblem take it off before you start painting and with the rear bowtie be very careful and mask off with newspaper and blue tape
@@ScouserTech thank you..good looking out...I will take a pic to show you my results. I am doing this myself. No hubby involvement😊
Awesome I’m excited to see the results . It will be a real nice custom piece for your truck
Thalia Avery how did it turn out?
Wd40 takes sticky right off
Good 👍
i like that way
At 01:55, you were all done. 😀
Got a link for the eraser pad?
Ben Pedersen yeah let me get one on here. Totally let that one slip
It sticks well? No issues running through a car wash?
The Meel no issues at all. The adhesive is the same you get from factory when you get your gold bow tie that’s already stuck on truck. My truck resides in Texas so heat is not an issue either. I have been through many car washes with no issues.
Scouser Tech awesome. I just got mine in, going to put them on tomorrow.
The Meel goodluck and just take your time with both. What year is yours?
Where did you buy the replacement emblems? Looks clean man
I bought them from Craigslist...Local seller worked at Chevy Dealership. I got them for decent discount. I think I paid $75 for pair. Best place is from Dealer or Amazon. I have a link attached on my front bow tie video. I will add the link to this video too. Thanks for reminding me.
Any suggestions on a black and chrome replacement for a 2008 Silverado 1500
seth johnson if you dont want to spend a lot you can always tape off with blue tape and put plastidip or black spray paint and clear coat over top. If you want to spend some money I’ve seen a buddy use the ones at Parts Geek www.partsgeek.com/gbproducts/PC/19009-03264446.html?PN&+Chevrolet+Silverado+1500+Emblem+Set+All+Sales+96101KP+07-13+Chevrolet+Emblem+Set+2011&fp=pp&gbm=a&PartsGeek+Google+Base&gclid=EAIaIQobChMI-Zil6ujk3wIVDtvACh2X1A9uEAkYBiABEgLQsPD_BwE&ad=47584901292
what part of south texas??
Was San Antonio
Waste of Time I masked it of and painted them both front and back .5 dollars for paint!
I know several people that have painted their emblems and they look great if you take care masking. PlastiDip black provides a satin smooth flat finish that looks very professional.
@@chrisgraham2904 the emblem has a molded diamond texture so you don't want to put more than one coat or you'll lose that texture.
Why ???????????????????
ABC ABC why not??????????? 🤔
@@ScouserTech : I prefer original gold , why jump on the bandwagon and go black . Especially when you have any color to choose from . Perhaps pink for breast cancer, or since your a SISSIE WUSS .
ABC ABC everyone who has a white truck in the parking lots near me has GOLD. So I like to be able to find mine faster especially when everyone in Texas seems to have a truck. Haha. Plus With my tint and rain guards the BLACK stands out better as well. To each their own.
I actually prefer the black emblems, even on my blue (Deep Ocean Metallic) truck. They look sick!
That glue is a bitch took me an hour to get it off
Awesome video. I’m doing mjme this weekend. Don’t forget to vote for Trump in 2020
Thanks and Good Luck. Take your time and you should be all good.
NO vote for Trump............