Exactly what I was looking for even the same roll of 3m vinyl thank you for not rambling about your dog getting married and your ex girlfriend getting ran over...
Dude! I watched someone plasti dip their emblems but this method looks so much cleaner and almost OEM. I am definitely doing this to my Chevy truck! Thanx for the video!
Loove this. So many people are saying oh you can by decals and stuff on the internet blah blah blah. Personally I love the extra work and the look of "I made this". All and all. Nice work dude...
Straight forward and to the point. Thank you. I have a blacked-out Silverado. I think some chrome wrap vinyl on the bowties will tie in really nicely with the chrome accents on the headlights.
Nice..i bought a little can of rustoleum and used my kids water color pain brush and finished front and back in under 10 min..its been 2 years still looks mint..plus paint will last many years
@@KathleenBellDreamingofDIY Do it! I get compliments on them, especially if I go to the Chevy dealer! I'm thinking about how to do the tiny bow ties that are on the rims. And the one on the steering wheel. !!!
All I did was cut the line to fit the boetie 3-4 months ago and it's still on there pretty good and doesn't show signs of coming off anytime soon. I never had to heat it, wipe it down or anything really. Works pretty much the same
Vinyl is faster no masking and very minimal prep, takes less than 10 min if you know what your doing, and last way longer , I’ve had both and plasti dip requires minimal of 3 coats , vinyl is one layer and you don’t have to wait for it to dry.
So much better! Apparently they started with that cheezy gold filling in 2000. Opinion: Nothing says tacky like fake gold. Hope someday someone at Chevy sees how many videos there are with owners going to the effort to change it and gets the message. It doesn't look so great in their ads, either.
"Chevy" HAS seen that people like the black bowties better - but GREED has set in and they now charge $295 to have a black bowtie put on the front and back - TWO HUNDRED NINETY FIVE DOLLARS to make it look just like the ones in this video !!! Thanks, J R Vlogs for showing us how to save $295 !!!
@@chadmark88 All the companies have their logos and markings locked up with copyright and trademarks so no-one legally make them aftermarket without licen$ing and you wind up stuck having to go OEM. I'll bet the stock bowtie isn't cheap, either.
Good vid. Yours just rolled on easy, I got so many wrinkles and no matter how many times I tired it wouldnt wrinkle. 1. Will heating it up take out the wrinkles? 2. Will a high power blow dryer work? Or do I really need a heat gun?
Have the same textured type embossed emblems (apparently some come smooth). How’d you get the vinyl to stick to both edges? Because there’s a two tiny indentations, one near the silver and the second is where the textured emblem goes smooth? I can’t get the vinyl to stick to that park
Joneshia did you try using the heat gun while pushing down with your credit card or whatever you’re using to push the vinyl down? That’s what I had to do on mine. Took awhile but finally stuck.
Looks good. Too bad my emblems are on the paint..... No way am I comfortable w/razor blading around Audi rings - will have to go plasti-dip. Prefer your way though as the material looks more durable
Did you ever get to trying it? I just bought the same stuff, iron on vinyl from circut. Trying to do my badges so wish me luck and let me know if you have any luck:)
Thanks for showing this! It came out great! I just did mine as you showed and they look awesome! The factory ones are stupid expensive, this is a great alternative.
@Alexx Yes ! It stays on perfect. I have had it on my 2018 for 5 years now . Trading the truck for a '24 GMC next week , and will be looking to black out the GMC emblems
I have friends who have done it. If you run through a car wash once a week, his lasted a year with 3M film. Another friend only hand washes his, and still going strong. They did at the same time. Hope that helps.
Short and to the point.... thank you. So many videos have so much extra that you do not need. This was spot on.....
Exactly what I was looking for even the same roll of 3m vinyl thank you for not rambling about your dog getting married and your ex girlfriend getting ran over...
😂😂😂
You’re a monster. That marriage must be celebrated.
😂😂😂😂😂 that shit was funny
Ex-girlfriend getting ran over is crazy. 😂😂😂
Dude! I watched someone plasti dip their emblems but this method looks so much cleaner and almost OEM. I am definitely doing this to my Chevy truck! Thanx for the video!
Loove this. So many people are saying oh you can by decals and stuff on the internet blah blah blah. Personally I love the extra work and the look of "I made this". All and all. Nice work dude...
Straight forward and to the point. Thank you. I have a blacked-out Silverado. I think some chrome wrap vinyl on the bowties will tie in really nicely with the chrome accents on the headlights.
This was the best tutorial on this subject. Worked great on my Blazer EV. Thanks!
Nice..i bought a little can of rustoleum and used my kids water color pain brush and finished front and back in under 10 min..its been 2 years still looks mint..plus paint will last many years
Thank you for a great video. I just received my gloss orange vinyl and I can't wait to do this to my two emblems.
I'm hoping to put orange vinyl on my orange Trailblazer's bow ties!
@@KathleenBellDreamingofDIY Do it! I get compliments on them, especially if I go to the Chevy dealer! I'm thinking about how to do the tiny bow ties that are on the rims. And the one on the steering wheel. !!!
@Jane Doe I am looking at those too!! Good luck!
How long does it last on there before you have to redo it. Especially if you take your vehicle through the car wash.
All I did was cut the line to fit the boetie 3-4 months ago and it's still on there pretty good and doesn't show signs of coming off anytime soon. I never had to heat it, wipe it down or anything really. Works pretty much the same
Thanks for the video, it's very helpful. Have a quick question, instead of using a heat gun would a hair dryer be suffice?
Yes most definitely
Where did you buy the black film?
Amazon its just black vinyl wrap
Plasti dip works better, faster & no cutting required. Just peel away for a perfect edge.
Less material waste too
Doesnt it come off?
@@dmf2990 Nope. Mine has been on for 5 years and through many car washes.
@@dmf2990 If you apply it correctly you won't have any peeling
Vinyl is faster no masking and very minimal prep, takes less than 10 min if you know what your doing, and last way longer , I’ve had both and plasti dip requires minimal of 3 coats , vinyl is one layer and you don’t have to wait for it to dry.
im trying to do a black trim package on my 2008 silverado and was preparing to pay 50 bucks for new emblems, this is gonna save me some serious money
My daughter did this for my Christmas present and so far it is holding up great!!!
Appreciate the video. How did this wrap hold up overtime?
just ordered the same wrap bcause this video. preciate it man
*This is really nice, looks 100% better my friend*
How well does that hold up in car washes?? Severe weather?
It's permanent vinyl. Holds up great.
Definitely will be doing this. Going to do mine in Chevy blue.
Link for that specific vinyl please
Can some please answer me this question!! How does it hold up in the long run? After washing it and different weather conditions?
How durable is it? With washing, highway driving etc?
I used an old toothbrush to get down in the edges to get the dirt loose and then used a card to get down in there.
Please give us the amazon link of the vynil.
Did you use heat transfer vinyl or sticker vinyl?
So much better! Apparently they started with that cheezy gold filling in 2000. Opinion: Nothing says tacky like fake gold. Hope someday someone at Chevy sees how many videos there are with owners going to the effort to change it and gets the message. It doesn't look so great in their ads, either.
More people probably don't change it and just leave it alone
Finely as of 2019 no huge bow ties in the front and back of the Silverado’s
"Chevy" HAS seen that people like the black bowties better - but GREED has set in and they now charge $295 to have a black bowtie put on the front and back - TWO HUNDRED NINETY FIVE DOLLARS to make it look just like the ones in this video !!! Thanks, J R Vlogs for showing us how to save $295 !!!
@@chadmark88 All the companies have their logos and markings locked up with copyright and trademarks so no-one legally make them aftermarket without licen$ing and you wind up stuck having to go OEM. I'll bet the stock bowtie isn't cheap, either.
Holy crap! I can’t believe this cost so much at the dealership!
Thanks I’ll never pay for this again.
So like will you put a link in the description to the wrap that you used? I'm definitely doing this!
Think he is using vvivid lil wraps for emblems
I want to know if doing this, whenever you wash the car it’s not going away?
Wow, totally impressed, you did an excellent job and it looks like the factory. Many thumbs up👍👍👍. Thanks for sharing from Nova Scotia
What the Chevy bow tie texture? If so, How did you get it not to see the texture?
Does this work with red? I want red bowties for my black Equinox.
can you leave a link to the wrap you bought?
The wrap I bought isn’t on amazon anymore for some reason but if you go on amazon and look up matte black car wrap and some should pop up!
where did you get these products if you don’t mind
Good vid. Yours just rolled on easy, I got so many wrinkles and no matter how many times I tired it wouldnt wrinkle. 1. Will heating it up take out the wrinkles? 2. Will a high power blow dryer work? Or do I really need a heat gun?
If you heat it up and stretch it it will take out the wrinkles and a blow dryer could work too
@@jrvlogs9654 Heat it up, pull it off, stretch it then press it on again?
JR VLOGS good stuff man, you know where I can get some of that vinyl?
How long did it hold up? Or it’s still going strong ?
Held up for about a year then I took it off to change the color of it I ended up wrapping it white as of now
JR VLOGS Thank you man !!!!
No problem
How long has this last for you? Has it gotten messed up?
Do I need a heat gun? Or can I get away with a hair dryer?
Nice job, well done. You have any ideas if a 2006 Silverado LT size front grill bow tie is same size as a 2018?
I think they are relatively the same I have raped and older 2005 one and it was actually easier that the newer ones
Does it survive car washes??
Hey, where did you get the material?
AWESOME JOB
Great video no music
how durable it is? will it wipe off when pressurewashing?
Do they make the vinyl in gloss black?
What’s the material and where did you buy it?
Vinyl and he said Amazon.
Nicely done. Takes some patience, I’m sure, but I’ll be doing this soon.
What wrap did you use
Does it peel or ware off? Or if it rains will it get damaged?
Have the same textured type embossed emblems (apparently some come smooth). How’d you get the vinyl to stick to both edges? Because there’s a two tiny indentations, one near the silver and the second is where the textured emblem goes smooth? I can’t get the vinyl to stick to that park
I'm having same problem. It doesn't stick like this guy's did
Joneshia did you try using the heat gun while pushing down with your credit card or whatever you’re using to push the vinyl down? That’s what I had to do on mine. Took awhile but finally stuck.
@@HiiiGHLIFE1 I am guessing he is using thinner vinyl? I use VViViD vinyl wrap and was having trouble getting it to stretch inside those grooves too.
How to remove the black sticker if we want to switch back to Original Gold ??
Just peels off.
This helped my husband alot. Thanks!
Will a hairdryer work in place of the heat gun?
Looks good. Too bad my emblems are on the paint..... No way am I comfortable w/razor blading around Audi rings - will have to go plasti-dip. Prefer your way though as the material looks more durable
car u use a blow dryer ?
Yes that would work!
You can buy pre made pre fit stickets off ebay for cheap
Would glossy permanent cricket vinyl work?
Yep!
How does it look now, being two years old? Any issues?
Yea after about a year and a half it starts peaking but I just redid it
I just tried it and the gold shows around the sides. It's shit
Could I use my Cricut vinyl?
I’m sure long as the adhesive is good idk why you can’t
Did you ever get to trying it? I just bought the same stuff, iron on vinyl from circut. Trying to do my badges so wish me luck and let me know if you have any luck:)
Looks clean 🔥
Hey man what about the rain or water? Does affect?
No if you prep the surface good enough and make sure all the corners adhere properly than you will be fine
Ehh...it's OK. Matt black is kind of old school trend. I went with the gloss carbon fiber vynl wrap for added dimension depth. Which looks way cooler
Awesome video! I hope it works on my truck!
Can you do this with a Toyota badge
Do you think it will be easy to do all the chrome badges ? Or just easier to de badge and put the black ones ?
Do not use peel and stick for all emblems. Plastic up is your best way to go.
Looks really nice
Thanks for showing this!
It came out great!
I just did mine as you showed and they look awesome!
The factory ones are stupid expensive, this is a great alternative.
Does it stay on?
@Alexx Yes ! It stays on perfect.
I have had it on my 2018 for 5 years now .
Trading the truck for a '24 GMC next week , and will be looking to black out the GMC emblems
How long did it last before it peeled?
More power and God Bless, Thank you for this video.
nice job thank you for the up load
Great job nice info
I want to do this but my Chevy symbols have ridges in them
Looks great!
looks really good. how has the film held up over time?
I have friends who have done it. If you run through a car wash once a week, his lasted a year with 3M film. Another friend only hand washes his, and still going strong. They did at the same time. Hope that helps.
Nice job, thank. I do this looks nice.
Pure GM quality...a one year old truck! Does this work on rust, too?
I thought they were call badges not emblems I could be wrong?
Nice. Clean. Will do. Thank you!
I bought the front & back OEM black bowtie emblems, so much nicer than vinyl
You deserve more subscribers than what you have 👍like the video!
I don’t want any chrome showing gonna trey todo the whole bow tie
Amazing incredible 10/10
Why paint it it will just fall off anyhow just like the tailgate handle
Now I can do my own ..GREAT VIDEO!
Nicely done
I had my doubts, nice!
Can I use a hair dryer?
Yea
Plastic Dip works better!!...And last longer!
Hyper dip works better than plasti dip. It's similar to spray vinyl. Still pealable And more durable. Does not feel like rubber To the touch.
@@hd758510 ~ Did you use hyperdip on your bow tie? I have a can just haven’t done it yet... curious if you covered the chrome also?
Thank you 😊.. it's was great help
Make sure you use your AutoZone card- You wife's Costco or Macy's card will not cut it...
No quema cuhhh 🇲🇽😂
Great video thanks man
no link ?
So if they were black, you would change them to gold, use your time more wisely
Professional, the best apresentation
It looks better gold.
I'm gonna try a mate black on the whole bowtie
Dude that credit card tip !
Well done. Thank you.
A foot by 5 feet? Umm let me guess, you tell your friends that you're packing a 8 incher?
Nice