CONFIGURING THE VELOCITYONE FLIGHT | MSFS | Part 1 | For Both PC and Xbox Users

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 255

  • @SimHangerFS
    @SimHangerFS  3 роки тому +2

    Xbox users can find part 2 here ua-cam.com/video/KLkTh9Gh3wY/v-deo.html

  • @DBR00
    @DBR00 8 місяців тому +13

    I cannot thank you enough for putting together this easy to follow video. First time user of the Velocity One and I had no clue as to how to get it working. Please enjoy a little token of gratitude from me. Watching from Las Vegas, NV.

    • @SimHangerFS
      @SimHangerFS  8 місяців тому +1

      Thank you for supporting the channel. 👍

  • @jamespepper1937
    @jamespepper1937 Рік тому +12

    Mark,
    I was so frustrated, having no clue how to do what you have demonstrated. Now I am so happy! You are very generous to take the time and trouble to help all of we newbies get the most out of the powerful VelocityOne device. Bravo!!

  • @get_outdoors
    @get_outdoors 3 роки тому +9

    Just received mine today, I’ve got a headache after 8 hours of trial and error setting profiles for the Cessna 152 and TBM 930. I didn’t build from scratch but instead stripped out the single prop profile. I actually set my Hat-1 to Pilot views(up and down) and once in instrument view I can toggle left and right between instrument views. Trial and error setting the levers for TBM but now I’ve got throttle, landing gear and flaps configured. The only other change I made was smart look combining LB and B2 as this was more representative of when I used the Xbox controller. I think I’ll follow your video tomorrow to build a base profile. I’ve blamed you to the Wife for the expense, your community fly-ins are very good 👍, cheers for effort you make for the community, great video. Tonydarkzero.

  • @liquidsky5428
    @liquidsky5428 Місяць тому +1

    This is exactly what Turtle Beach should have on their channel as tutorial for users. Thank you very much for the time and effort.

  • @NOELTM
    @NOELTM Рік тому +2

    As a newbie to MSFS and the Velocity One I have found your videos immensely valuable and informative in getting started and understanding how things work. Thank you very much for taking the time to share your knowledge and experience.

  • @TheShredderofsnow
    @TheShredderofsnow Рік тому +5

    Thank you for the very detailed video! I just ordered this yoke along with the rudder pedals for my Series X and anxiously awaiting delivery. Your review video really helped me when deciding to buy this set up. This video is going to help me alot when settling up my yoke when it arrives! Some of your suggestions I didn't even think of when planning it out in my head and I love how you brake it down step by step making it easy to follow along with! If you don't already have a video out I would also love to see how you would set up a multi engine plane for the velocity one. I've been wanting to get into those planes but have been pretty hard to fly with the Thrustmaster Hotas One that I've been using. Can't wait to get my Velocity One in a couple days!

  • @shhteeeve
    @shhteeeve Рік тому +1

    I'm a total noob to flight sim and got a velocity one and these videos are invaluable to me. Great work!

  • @mcculleys3780
    @mcculleys3780 8 місяців тому +2

    Wonderful overview! Turtle Beach should be paying you for this! Thank you.

  • @rickl6697
    @rickl6697 3 місяці тому +3

    Turtle Beach should be sponsoring your channel. Thank you. A++++++
    I haven't bought one yet as I'm trying to figure out how to use the rudder triggers on the yoke for taxing and be able to reach over and adjust the throttle without also buying the rudder pedals as I just can't afford to buy that too or maybe I should buy a flight stick with the rudder control built into the twist of the stick. Again, thank you!😊

  • @10CrazyGlue
    @10CrazyGlue Рік тому +1

    Thank you for this & all of your other msfs content! This yoke was a little overwhelming at first, but you ability to break it down Barney style was a massive help.

  • @MrBloxboy
    @MrBloxboy 3 роки тому +9

    Thanks Mark for your easy to follow tutorials. Looking forward to part two.

  • @willemfs6733
    @willemfs6733 3 роки тому +4

    Soothing as always. Thanks for your energy Mark!

  • @rashidfarookee7521
    @rashidfarookee7521 11 місяців тому

    I am not a senior simmer having joined the community in Feb’23.Your tutorials and videos on various subjects have been of immense help in learning the ropes of this marvellous game or better still Flight Simulator.I started with Thrustmaster Hotas One configuring which was a breeze. Having gained reasonable experience I thought it would be a good idea to upgrade which I did in the shape of Turtle Beach Velocity One.I am on Xbox and Velocity has been acquired just a week ago.It also appears updated with firmware of 1.0.0.I straight away got down configuring it following your videos but got frustrated due not getting the configuration right despite following every step as per your videos.The bindings though correct are not confirmed by the movement of axis in the white horizontal bar.I just don’t seem to understand where I am going wrong or is it some kind of a bug which is not letting it to work.I did read on FS forums that people faced similar issues and it was flagged as a bug in earlier stages.I would appreciate if you can give me some pointers to troubleshoot this bug.

  • @billstruth1128
    @billstruth1128 Рік тому +1

    Mark Thank you very much for this excellent guide! I have been a legacy X-Plane player on a Mac. Between that and being much older was finding switching to Flight Sim 2020 very frustrating despite its glorious eye candy. This video was a wonderful discovery with your experienced insights on setting up operations in addition to your suggestions on use of 2020 features.

  • @doctaprocta
    @doctaprocta 9 днів тому +1

    I've loved using this configuration for MSFS 2020. Now that MSFS 2024 is out, do you plan to roll this same config into the new simulator? Or are there any modifications you are contemplating with the expanded feature set?

  • @Kevin-ib4gv
    @Kevin-ib4gv 2 роки тому +1

    Nice videos Mark. Just a tip about real world flying. Rudder and aileron trims aren't used to counter crosswinds aloft. Set a crab angle and leave your trims alone. 100 knot airspeed, 20 knot 90 degree crosswind, and nose 12 degrees into the wind is a basic setup to stay on course for 172's. Using a E6B will give results for other wind speeds and angles. I would keep the rudder/aileron hats free for other purposes and assign a keyboard command for the few times you may them. Set your autopilot for GPS and VS mode and you'll never touch a trim anywhere.

  • @frankw204
    @frankw204 2 роки тому +2

    Excellent video. Just received the VelocityOne yesterday. Struggled with the buttons with the exception of the obvious controls. So happy to watch your video. Why Turtle Beach couldn't have offered more literature is beyond comprehension. Found how to successfully update the controller firmware (crucial) in conjunction with the Xbox on the internet. That also would have been helpful with some information in the packaging. The quality of the device and the careful packaging were great. It should be noted that the alert panel (SIP) behind the yoke are awaiting firmware update before they are totally functional (at least on Xbox).
    Thanks again, much appreciated.

  • @matthewtaylor2965
    @matthewtaylor2965 2 роки тому

    Brilliant video for those who want to try and understand how to assign controls from xbox controller and transfer to velocity after purchasing. Makes very good tutorial on how to and helping understand the terminology of the aircraft controls and applying them to your new velocity. Fantastic video

  • @zonnetjeschijnt
    @zonnetjeschijnt Рік тому +1

    Here’s a suggestion for the case of taildraggers, when you need soft/subtle braking… you can assign two of the throttle levers to the left and right brake axis 💡

  • @ratz7150
    @ratz7150 2 роки тому +6

    Just wan to say that a new firmeware update is available for Velocity one. With this the reverse thrust toogle option now works. You pull your levers completly back and than forward and you can controll your reverse thrust.

    • @kamilarunkowska4832
      @kamilarunkowska4832 Рік тому

      For me it sets it to reverse thrust at 50% I don’t know how to fix

  • @stormtracker1
    @stormtracker1 Рік тому +1

    Hands down the best how to video there is!

  • @CanadianTexaninLiguria
    @CanadianTexaninLiguria 3 роки тому +1

    I'm so glad I have the Stream Deck now - no messing around with my wheel and throttle anymore

  • @BOOTSYSMOVIES
    @BOOTSYSMOVIES 3 роки тому

    Thanx Mark I figured it out myself how to arrange the V1F with re edit the existing default profile and save this as a new file. Compliments for your clear and easy to understand method of explaining your way 👌👏

  • @phillong4762
    @phillong4762 2 роки тому +1

    Thanks for help mark. The trouble i had though because we set up a new profile we didn't have the throttle to be able to test the plane like you did. Found part two 👏

  • @MBL2210
    @MBL2210 Рік тому +1

    Couldn’t be ANY better. Thank you!

  • @edwardpiroska9757
    @edwardpiroska9757 6 днів тому +1

    This was so helpful for MSFS 2020. Will we see this updated for MSFS 2024? Thank you.

  • @Gideonsmythe
    @Gideonsmythe 3 роки тому +2

    You are a legend Mark, I've struggled to configure mine and have had some bad flights. It really doesn't work with jets using mode 2 (the twin engine). Thanks again, I've got some exciting simming ahead of me this weekend.

  • @berger1005
    @berger1005 3 роки тому +2

    Thanks Mark. I appreciate your good work.

  • @billconway1753
    @billconway1753 2 роки тому +1

    Hi. Thanks so much for producing this video. Learned a few tricks from you that are really useful. Found this video to be very helpful. Can't wait to watch part 2. Does part 2 cover sensitivities for this thing? I know the A 320's are very finicky in this area. My Saitek pro had really large dead zones to compensate for it.
    I'm setup on PC so a couple things were different but I followed along. Note to users: I found that if I disconnect and reconnect TBV1, it goes back to XBOX mode by default, which is a problem for PC users. Has to be rest or MSFS won't recognize your controller.
    Love the B1/B2 buttons settings. Nice trick. Love it. Thanks again for a great video.

  • @markheatherington8367
    @markheatherington8367 Рік тому +1

    Wonderfully explained - thanks so much!

  • @suryarahardian3141
    @suryarahardian3141 Рік тому

    Loud and clear Sir...thanks for your guidance...

  • @kiflelk
    @kiflelk Рік тому +1

    Thank you for your brilliant video. One question I have is after you configure a number of buttons you can directly jump into the cockpit to check on your settings and I couldn't figure out how you transition to that view. Please help

  • @bubblehead78
    @bubblehead78 2 роки тому

    Superb presentation, Mark. You are an excellent instructor! BTW, while flying yesterday, that 'don't sink' heard in the video around 22:30 drove me crazy. Have to figure out how to silence it.

  • @MrWildbil7
    @MrWildbil7 11 місяців тому +1

    excellent tutorial, the best to date on youtube

  • @Simon-us1fu
    @Simon-us1fu 3 роки тому +1

    What a gem of a video, thank you for your time and input into this, so valuable.
    I have used this set up on the caravan and seems to be working well.

  • @chrisbeccarel7240
    @chrisbeccarel7240 2 роки тому +1

    Hi Mark,
    I did add some internal friction to the upper and lower levers works quite well but does requires taking the unit apart. Can send you some pictures if you are interested.
    I do have a couple question for you:
    1.how did you set-up the smart cam.?
    2.how are you sensitivity settings?
    I'm on XBOX...
    Best regards,

    • @SimHangerFS
      @SimHangerFS  2 роки тому

      I have some general guides that may assist. Check out this playlist. ua-cam.com/play/PLSyT1Loyov5iZU38-D8xEwhTyKqES4_e9.html

  • @KnottyFlyer
    @KnottyFlyer 2 роки тому +2

    Great video. Very helpful. Well organized and clearly presented. Excellent instructional video for a newbie like myself. Thank you.

  • @ArieWasserman
    @ArieWasserman 4 місяці тому +1

    Hello Mark. Your video is great, I've been following you since I had an Xbox. I purchased a desktop computer and a new flight simulator "Prime De Luxe". I followed your first video very carefully. I followed all the steps. And for some reason the simulator does not recognize only the trim weel. I would be very grateful if you could write me which button to press in the shortcut key? Or how to make the wheel recognize a key. Thanks in advance Aryeh

  • @arianukas
    @arianukas Рік тому

    thank u! i got that Yoke for christmas today, and we have ordered msfs so this will help a lot cuz i’ve never played msfs :)

  • @QuidProqu0
    @QuidProqu0 2 роки тому +1

    Thank you so much. Bought this a while ago and was having nightmares of how to use it!

  • @neilmackey9626
    @neilmackey9626 Рік тому

    Good day, Mark!
    Unless I missed it somewhere (watched Parts 1 and 2 several times), when it comes to the trim wheel on the throttle quadrant, did you stick with the default setting or make your own "tweaks"? (This is on an Xbox Series X).
    Mine just seems VERY sensitive with the default settings. Moving it just one "nub" seems to dial in wayyy too much trim. I tried some various settings but haven't seen any improvements...suggestions for better settings?
    Along those same lines...it there a "center" to that trim wheel or is it simply a continuous action? I thought about trying to find one and then marking one of the nubs with some white paint but perhaps I'm overthinking things... ;-)
    Cheers!

  • @kiflelk
    @kiflelk Рік тому +1

    Hi! I am waiting for your response to my question - how you instantly jump to your cockpit after doing your button assignments. If any one from your audiences has an answer, I would be grateful too.

  • @parkerstucki9833
    @parkerstucki9833 2 роки тому +1

    Absolutley amazing videos. Just subbed.

  • @RodAU
    @RodAU 2 дні тому

    I set mine up the same as in your video and the quick view doesn't work in cockpit mode but does in external camera mode. I can't figure out what is happening ... Any advice ?

  • @galaxypursuer
    @galaxypursuer 2 роки тому

    Brilliant Video. As I'm learning to fly a 152, this video really helped. Thank you.

  • @Dronerangerspro
    @Dronerangerspro 11 місяців тому +1

    Excellent tutorial. Thank you!

  • @chrispurkiss1491
    @chrispurkiss1491 Рік тому +1

    Hi, new viewer. I purchased a refurbished model but it didn't come with the wallchart. Any idea of how I can either obtain one or at least print one off so I can compare the PC/Xbox differences. Thanks

  • @sariearar5614
    @sariearar5614 6 місяців тому

    Hi, Thanks for the video, it helped me as a first timer to set the said yoke on my PC, however, I can't seem to be able to assign the trim wheel on my PC for MSFS 2020. Any ideas what I need to do?

  • @stephanebnt1682
    @stephanebnt1682 Рік тому +1

    Hello Sir ,
    to start, I would like to thank you warmly for your videos and, following your advice, I bought a yok turtle beach.
    I am your new French subscriber.
    then I take the liberty of asking you for a little video advice on the sensitivity settings of your yok.
    thank you

    • @SimHangerFS
      @SimHangerFS  Рік тому

      For pitch turn down (minus) sensitivity by just a little….5% and roll I leave at default.

  • @robertfrum2098
    @robertfrum2098 5 днів тому

    This is very helpful, do you think you could make a video for setting up the velocity one with MSFS2024?

  • @K1ngKevinTV
    @K1ngKevinTV 2 роки тому +1

    Great video!! Both part 1 and 2 were a great help! What button do you use to toggle the engine on and off?

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      I use one of the buttons on the throttle quad

    • @K1ngKevinTV
      @K1ngKevinTV 2 роки тому

      @@SimHangerFS last question haha what is the engine start function called?

  • @SCAerialsSteveCarpenter
    @SCAerialsSteveCarpenter 2 роки тому

    Hello Mark, Thank you for this detailed configuration video. I just purchased the Velocity one controller, and this video will be an excellent asset for configuring my controller. I found your channel videos by searching VO on UA-cam. New subscriber, Thank You.

  • @pietve905
    @pietve905 Рік тому

    Is it possible that button assignments have changed since the latest version? Trying to follow your set up but get different assignment assignments?.

  • @rgm4646
    @rgm4646 9 днів тому

    The new msfs 2024 has a slightly different control interface but these instructions still work great!!

    • @doctaprocta
      @doctaprocta 9 днів тому

      I was trying to figure out if it's worth porting this configuration into 2024, or if we might lose any functionality with the new sim...

    • @rgm4646
      @rgm4646 9 днів тому

      @@doctaprocta not sure yet. I was testing and the game crashed(xboxsx) I cant get back in now.

    • @alexkalopsia
      @alexkalopsia 8 днів тому +1

      ​​@@rgm4646 @doctaprocta are you playing on Xbox? Have you figured out a way to navigate the ingame menus via the velocityone?

    • @rgm4646
      @rgm4646 8 днів тому +1

      @@alexkalopsia yes im on xbox series x. I just use a keyboard and mouse for menu navigation.

    • @alexkalopsia
      @alexkalopsia 8 днів тому +1

      @@rgm4646 alright, that's reasonable but also seems so silly when the VelocityOne has all the sticks A B X Y, bumpers and triggers. Like, they work perfectly fine on the Xbox dashboard but not at all in msfs :'(

  • @SifLawdKethen
    @SifLawdKethen 6 днів тому

    How do you get it to only register pov direction without another input its so sensitive

  • @mikael3529
    @mikael3529 10 місяців тому

    Hello and thanks for very nice video. I usually fly Pmdg 737, do you know the best sensitive for the yoke?

  • @geaz_y
    @geaz_y Рік тому

    This was a very helpful video, but I have some thoughts. As a new MFS player I am wondering, What about all of the other assignments/keybinds? And what Im getting too is, do I need every single assignment for me to have a good experience in the game.

  • @billcom1200
    @billcom1200 2 роки тому

    Mark, question about using rudder controls ( I don't have the unit yet). On takeoff, my right hand, would be on the throttle. I fly GA planes, and most have a pronounced left yaw tendency. How would I apply right rudder when my right hand is on the throttle? Switch the rudder inputs? Thanks, Bill

  • @ethanyake3730
    @ethanyake3730 Рік тому +1

    Thank you so much this helped a lot

  • @DcRizza75
    @DcRizza75 Рік тому

    Thank you!!!! Absolutely fantastic instructional!

  • @donatasjakimavicius9968
    @donatasjakimavicius9968 2 роки тому

    Hi, my pc shows the picture of velosity one in controls options but its named controller xbox 360 fow windows. Whats the problem?

  • @morganbisley886
    @morganbisley886 2 роки тому

    Just what I needed thank you so much for this video. Love your content

  • @Daniel-rv9hf
    @Daniel-rv9hf 2 роки тому

    Brilliant video. It was a big help to resolve my mapping issues. Thanks a lot.

  • @kobecamarillo3547
    @kobecamarillo3547 2 роки тому +1

    Hey! I seem to be having a problem with my L Axis 3 for my elevators. Whatever i do they dont work, so frustrating… thank you

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      Check in windows that the axis is calibrated and working. Check nothing else is assigned to that function and ensure pilot assist functions in the assistance menu are all off.

  • @carpilot3066
    @carpilot3066 Місяць тому

    Hi can you say me how to used the atc? I tried to respond to the atc but show me to press the option 1 2… And I don’t have numbers to press. In a keyboard is possible but in Xbox I don’t know how to do

  • @darrenbrowne4792
    @darrenbrowne4792 5 днів тому

    Are you able to do a similar video to button map the velocity one for Xbox FS 2024?

  • @certifiedgoose
    @certifiedgoose Рік тому

    When I pull back the throttle for the elevator axis, mine says L-Axis Y and the test does not work

  • @SpatialGuy77
    @SpatialGuy77 2 роки тому

    Hi. Thanks for the nice clear video. With your brake selection, haven’t you chosen an on or off option rather than graduation using brake axis so you brakes can be on a little or a lot or anywhere in between, rather than 100% on or OFF?

    • @SimHangerFS
      @SimHangerFS  2 роки тому

      On and off only for parking brake.

  • @MikeTaylor-tw5wb
    @MikeTaylor-tw5wb 2 роки тому

    Thanks for this mate. Very helpful

  • @fairsyj9816
    @fairsyj9816 6 місяців тому

    I might be two years too late but i recently got a velocity one flight and for some reason its coming up as “3 axis 20button gamepad with hat” and I have no idea why could you help?

  • @Trevs-Shed
    @Trevs-Shed 2 роки тому +1

    Doesn't appear to work as shown on the new 1.3.3 firmware. I assign the first 3 settings and save, the movement only makes the name of button flash, the bar does not move, exit back to the aircraft and none of the 3 freshly assigned settings work.

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      Check the update is installed correctly. Awaiting v1.4.0 due out soon I hope.

    • @Trevs-Shed
      @Trevs-Shed 2 роки тому

      @@SimHangerFS Many thanks for the reply. I found that a reset of the Xbox series X was required before it worked as expected. One last question, the hamburger button is setup as per your guide but it only takes me out of the sim to the menu, pressing it again won't take me back in to the sim. Pressing the hamburger button on the Xbox controller does take me to the menu and another press takes me back in to the sim. Did I do something wrong there?

  • @Markinpuff
    @Markinpuff 2 роки тому

    Is this ok for a total beginner? I’m just finishing my PC build and getting ready to fly around in my room.

  • @caspers5431
    @caspers5431 2 роки тому

    Great video thank you. Question about the rudders. When I press the left or right rudder trigger the rudder operates correctly but while I'm still holding one trigger button the rudder automatically returns to the default position. Watching the rudder pedals they work and then come back up while still holding the trigger. Am I missing something? Any advice will be greatly appreciated 👍🏼

  • @stevencastelletti577
    @stevencastelletti577 2 роки тому

    Love your assistance. Im using the Cessna 152 and during night flights, I can't get the instruments to light up. Can't figure out which ones they are. Can you please advise me? Im a beginner.

  • @XhaleR
    @XhaleR 2 роки тому

    Great video and help setting up the VO! I have copied your profile setup as in the videos on both the yoke and quad as this suited me perfectly and have a question regarding the Aileron trim (ref.15:47). Is there any "reset aileron trim" function as with the rudder trim? I found a control called "Reset Aileron", but this didn't have any effect on the trim. Any tips or workarounds would be appreciated.

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      No reset that I am aware of unfortunately

  • @thejoshuatree6924
    @thejoshuatree6924 Рік тому

    Every time I start flight simulator my xbox controller is selected in the control options menu. But I want my Velocity Flight to be selected automatically. how do i set that up?

  •  2 роки тому +1

    Thanks a lot for a great video! May I ask a noob question, even before I have get going with my Velocity One. How does the status panel behind the yoke? I have only static light.

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      The config options are still in beta testing, still to be implemented.

    •  2 роки тому

      @@SimHangerFS Thanks!

  • @sanmwaugh2003
    @sanmwaugh2003 2 роки тому +1

    Hi do you need to setup the profile in the yoke like twin engine profile and then create a custom profile in msfs to use it . I setup some custom buttons based on twin engine profile on msfs but yoke won’t detect

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      The profiles on the yoke do not transfer to MSFS. Or the other way round. They are purely there to help you understand what buttons do in each profile…ignore these…

    • @sanmwaugh2003
      @sanmwaugh2003 2 роки тому +1

      @@SimHangerFS thank you. So any custom profile I set in msfs should work automatically is in it ?

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      @@sanmwaugh2003 the profiles you set up in MSFS can be selectable in-sim.

    • @sanmwaugh2003
      @sanmwaugh2003 2 роки тому

      @@SimHangerFS thank you so much for replying 🙏

  • @christinanarz6852
    @christinanarz6852 Рік тому +1

    I can't get the trim wheel to work... can anyone help

  • @adrianjohnston6764
    @adrianjohnston6764 2 роки тому

    Great videos, just a problem I can solve yet. B1 external view, but my pov 2 isn’t giving free look🤔 in cockpit view, no problem, what am I missing?

  • @tyroneturner4128
    @tyroneturner4128 2 роки тому

    fantastic tutorial. easy for us noobs to follow.

  • @jdogos
    @jdogos 2 роки тому

    1000 Thank you, the only difference i made is with the hat up/down. I used them to increase/decrease cocpit height view. Greetings from Greece!!!

  • @alexaiple9837
    @alexaiple9837 2 роки тому

    Everything has worked except cockpit quick view right/left next pilot previous pilot with pov 1. I've cleared and re assigned over and over. Suggestions?

  • @HolladayAviation
    @HolladayAviation 9 місяців тому

    Do you know if it's necessary to use the Xbox wireless controller while using the Turtle Beach Velocity One? The A/B/Y/X buttons on the yoke don't work all the time, so I've had to use the Xbox controller to get some things done.

    • @SimHangerFS
      @SimHangerFS  9 місяців тому

      No you don’t need to use it. Check your yoke firmware is fully up to date.

    • @HolladayAviation
      @HolladayAviation 9 місяців тому

      @@SimHangerFS honestly, I’m not too impressed with this Velocity hardware

  • @stephenmason5682
    @stephenmason5682 2 роки тому

    As usual Mark great video, very relaxed and informative!
    Two weeks ago, possibly after an update, something critical has happened? On my velocity One yoke and PC version NONE of my single prop planes engines will now work?
    All levers and mappings work great including sensitivities, BUT the engine revs don't increase? It's like the assistances are switched on and stop the revs increasing?
    What's equally confusing is that the Yoke is perfect using the Xbox version?
    Have you heard anything about this please?
    Keep up your great work!!

    • @SimHangerFS
      @SimHangerFS  2 роки тому +1

      There are some bugs which should be sorted in SU9. Try changing config to throttle axis as opposed to throttle one axis etc.

    • @stephenmason5682
      @stephenmason5682 2 роки тому +1

      @@SimHangerFS thanks for that mark, I've tried so many things, I've moved over to my xbox version for now. The PC version is unplayable. Thinks for the update. S

  • @johncarlisle17
    @johncarlisle17 2 роки тому

    Total new guy here. Just installed the Velocity One and I am going through your video, which is very good. You often 'pop' back to sim view. How are you doing this?

    • @SimHangerFS
      @SimHangerFS  2 роки тому

      From controls menu select return, then resume.

  • @markgriffin2285
    @markgriffin2285 2 роки тому

    You need to show what button you are hitting for settings! For the Camera External View, I have no idea what to push or which direction to go. Please Help!

  • @billpowers8213
    @billpowers8213 2 роки тому

    MIKE HOW DO YOU FLY THE KING AIR. TWO ENGINES BUT SOFTWARE ONE HAS ONE ENGINE. ANY IDEAS?

  • @stevenewton1238
    @stevenewton1238 3 місяці тому

    MY TRIM WHEEL IS REVERSED I AM USING PC, I DO NOT HAVE THE REVERSE AXIS TOGGLE AVAILABLE? PLEASE HELP AND THANK YOU FOR THIS VIDEO
    Sorry caps.. Also when I start flight sim they throttle sets its self to full. the controls are very frustrating

  • @frankw204
    @frankw204 2 роки тому

    Follow up to my previous comments. Would it make sense to name the first profile "Cessna 152", tweak it, and test for a while? Copy the profile & name it for a different (next) aircraft. On and on . . .? That way, it might be easier to solve the subtleties of different aircraft by preselecting the associated (named) aircraft profile prior to flight and making necessary adjustments as time dictates.

    • @SimHangerFS
      @SimHangerFS  2 роки тому

      Don’t miss the continuation of this video part 2 ua-cam.com/video/KLkTh9Gh3wY/v-deo.html

  • @chrispurkiss1491
    @chrispurkiss1491 7 місяців тому

    Hi Mark any idea why with the default Cessna C172 G1000 I don't get any movement on the trim when waiting to taxi? I had a few issues with the power settings on the TB and did a reconfiguration following the TB instructions and the power is now fine but I can't seem to get the trim wheel working, or am I missing something.

    • @SimHangerFS
      @SimHangerFS  7 місяців тому

      Recommend you configure trim to buttons..elevator up & down.

    • @chrispurkiss1491
      @chrispurkiss1491 7 місяців тому

      @@SimHangerFS Thanks Mark, any particular reason for not using the trim wheel?

    • @SimHangerFS
      @SimHangerFS  7 місяців тому

      @@chrispurkiss1491 it is too erratic for my liking with many aircraft.

  • @starz1ndasky73
    @starz1ndasky73 2 роки тому +1

    is it compatible with Microsoft Flight Simulator X Steam Edition (2016) ? i need assistance asap

    • @SimHangerFS
      @SimHangerFS  2 роки тому

      I don’t know, but should be. Lights will not work I guess.

  • @denodan
    @denodan 2 роки тому

    How come, if I make a profile for my Volecityone yoke and go to use it, it won't work? All I done was change sensitivity of my twin jet profile. If I go back to the default profile it works. Also if I use a new profile abd use auto pilot, aircraft just circles

  • @johnporter5828
    @johnporter5828 2 роки тому

    Just plain excellent ! Thanks !

  • @hamsack981
    @hamsack981 Рік тому

    Thank you so much. 😊

  • @melito1955
    @melito1955 3 роки тому +1

    Vuelo con Fligth Simulator de Microsoft desde 1995 y Ahora Xplane 11 y Fligth Simulator de Microsoft 2020,

  • @MrCustom83
    @MrCustom83 11 місяців тому

    My VelocityONE Flight Yoke is plugged into a USB however when I go to the control options page it does not show up. Any suggestions?

    • @desmonddutremaine2044
      @desmonddutremaine2044 10 місяців тому

      I have the same problem it’s only showing an image of an Xbox controller no matter what I do please help if you figured this out bro!!!

  • @TENGILL
    @TENGILL 6 днів тому

    Will you do an updated version for 2024?

    • @SimHangerFS
      @SimHangerFS  6 днів тому

      @@TENGILL yes, once I can make sense of the new options 😂

  • @10CrazyGlue
    @10CrazyGlue Рік тому

    Any idea why not all of these button mappings work when in a different single engine aircraft? Example being if I'm in the Beaver & I press POV-1 LEFT (inside cockpit) it goes to 45 degree angle left view & if I press it RIGHT it looks behind. All external quick views work fine.

    • @SimHangerFS
      @SimHangerFS  Рік тому +1

      This is a modified view created by the developer specifically for that aircraft.

    • @10CrazyGlue
      @10CrazyGlue Рік тому

      @@SimHangerFS thank you