Looks like you haven’t posted a video in some time and may not be active anymore but man you’ve got a bunch of really thorough and helpful videos here. I appreciate that you took the time to make them.
I’m absolutely JAZZED about this. Old comment, I know, but all that way into 2024, it’s still a problem. My current toner hates active POE digital networks. This is gonna save me a ton of guesswork.
Thank you very much! Went quickly - Will need to rewatch a few times w/ my test set to hand - You answered questions I had about my own (same model) test set and about other methods of tracing and identifying faults. Thank you again!
HOLA HECTOR, cuql es la diferencia entre el generador de tonos de este video y el que tieenes tienes? En este veo que tiene 4 iconos amarillos con luces al lado izquierdo del selector y el tuyo tiene 2 .
Can you test just one Single Wire at a time? Such as using it in an Automotive situation or for Trailer-Camper wire mapping after someone else has made a bunch of splices and re-wiring?
Hi, Does anyone know where I might get a Pro 200 Toner repaired? I bought one off ebay, it worked but I put it on a cable that runs by a motor and its now stopped working (battery is good). If set the probe to analogue mode and hold it inside the RJ45 port of the toner I can hear it beeping lightly in all the different settings. (except ohms, that just hums).
wish it worked like the manual. goind to service mode does nothing; no lights anywhere. but tried it on working cables, test cables. all the same.; Service does nothing.
Black Sheep if one wire in the cable is broken 20 feet from the tone generator you will still hear tone at the end of both wires tested Which means tone SIGNAL is induced in the bad wire from the good one Which means THIS TOOL IS USELESS IN FINDING BAD CABLE ITS ONLY USED TO TRACE WIRES
Looks like you haven’t posted a video in some time and may not be active anymore but man you’ve got a bunch of really thorough and helpful videos here. I appreciate that you took the time to make them.
My man...thank you for this. I had no idea why my toner was making sounds I'd never heard before!
4 years later and it still did it's job!
After refining my search, i found your video. Super straight to the point, and helpful. I appreciate it.
I’m looking at purchasing one of these. Thanks for the review. You’ve helped me make the decision to purchase.
FYI, the Pro200 is actually able to tone on a live/active network.
zykzyk85 that is very true normal toners have problems with a live switch for sure.
Lots of noise on the line this works great in that situation
I’m absolutely JAZZED about this. Old comment, I know, but all that way into 2024, it’s still a problem. My current toner hates active POE digital networks. This is gonna save me a ton of guesswork.
Thank you very much! Went quickly - Will need to rewatch a few times w/ my test set to hand - You answered questions I had about my own (same model) test set and about other methods of tracing and identifying faults. Thank you again!
Thanks to show how it works, its refreshing.
Muchas gracias, me ha ayudado mucho. He acabado comprendiendo la cantidad de prestaciones que tiene el generador de tonos Intellitone Pro200.
HOLA HECTOR, cuql es la diferencia entre el generador de tonos de este video y el que tieenes tienes? En este veo que tiene 4 iconos amarillos con luces al lado izquierdo del selector y el tuyo tiene 2 .
@@MR-zj7yg El mío es el nuevo modelo.
El anterior estaba más enfocado a teléfonos.
Y el nuevo es prácticamente igual.
@@elektrikahectorfernandezol5341 Gracias Héctor, saludos.
Great review and simple explanation of its uses, Thanks
+crgslistbuyer Thank you!
Thank you! Very helpful
So much charm and charisma my guy
Very helpful! Thank you for taking the time to make the video!!!
Excellent information. Thank you for taking the time to share.
Thanks with greetings from Germany :)
4:10 which pins is he connecting the alligator clips to? That looks to be a cat5? Thanks for your help!
can ou Turn the Toner off and On if you wanna test the Copper Line back To socket ?
Where could I find the rj45 and rj11 alligator test leads? Could I simply build my own or is it easier to buy replacement ones?
Can you test just one Single Wire at a time? Such as using it in an Automotive situation or for Trailer-Camper wire mapping after someone else has made a bunch of splices and re-wiring?
thank you for the video.
Hi, Does anyone know where I might get a Pro 200 Toner repaired? I bought one off ebay, it worked but I put it on a cable that runs by a motor and its now stopped working (battery is good). If set the probe to analogue mode and hold it inside the RJ45 port of the toner I can hear it beeping lightly in all the different settings. (except ohms, that just hums).
wish it worked like the manual. goind to service mode does nothing; no lights anywhere. but tried it on working cables, test cables. all the same.; Service does nothing.
Great explanation,Thank you.
does the toner produce audio in speakers?
Great help ?this shuts off . How do you keep this on longer time
Great Video ...Very informative ...Thanks
Does anyone know where (or a part number) for the RJ45 breakout cable to alligator clips, RJ11 and CAT5?
Very helpful, thank you!
Thanks a lot very well made video
thank you
Great video, preage can you provide Information (manufactur / Type) about to buy the cable from Rj45 to Rj45, Rj11 and crocodile?
Did you find what you are looking for? I am looking for the same thing
Black Sheep
if one wire in the cable is broken 20 feet from the tone generator
you will still hear tone at the end of both wires
tested
Which means tone SIGNAL is induced in the bad wire from the good one
Which means THIS TOOL IS USELESS IN FINDING BAD CABLE
ITS ONLY USED TO TRACE WIRES
nice
👍👍
very bad audio. I couldn't hear what he was saying.
TURN UP YOUR VOLUME