The fact that you used a home made bearing press instead of beating in your bottom bracket with a hammer made me like this video. This is how bikes should be put together
True that bearings should be pressed in vs hammering. I’d recommend only doing one bearing at a time though and I wasn’t able to tell if he used the spacer for the bottom bracket. For an 8 spline crank it’s not a huge deal imo, but for a 48 spline crank you’d really want it in there if you care about making your bearings last.
Awesome build. I did my dream build a few months ago. Flybikes Tierra 20.6 frame black w/ pink and white sticker kit, Odyssey r25 fork black, Odyssey headset hot pink, Sunday freeze stem black, Primo samsquatch bars 9 inch black, Odyssey mid lever hot pink, sunday jake Seeley grips pink and black swirl, Odyssey par ends black, Odyssey slic cable hot pink, Sunday crank 170 black, primo Spanish bottom bracket white, Odyssey LaGuardia sprocket 28t black, Odyssey twisted PC pedals pink and black swirl, Odyssey pivotal seat post 180mm black, bone deth vibrator pivotal seat leopard print, Odyssey evo brake hot pink, Odyssey ghost brake pads clear, g sport roll cage rims 36h hot pink front and rear, titanium spokes anodized black, Odyssey vandero front hub female axle black, Odyssey clutch v2 freecoaster rear hub 9t female axle black, haro lineage park pegs x4 hot pink, Odyssey path tires 2.4 front and rear black, Odyssey tubes, Odyssey bluebird chain black
Hey just a pro tip: make sure when you use those wrenches you’re turning them the opposite way the head is going. For example, when you installed the BB they were being turn the wrong way at the beginning. It just prevents the possible of stripping anything and making the wrenches last longer
Right!! Once my 3yr old son was looking out our door into the garage and all I heard was "that's my daddies bike" I never ran so fast to my garage lol. Was an old s&m build.
This kid flips his wrenches around like a drummer in a rock band ! Awesome , or sick or dope ..... whatever you kids are saying these days !! No disrespect just funnin"
Where'd you buy your bike parts from. Im planning on building my own bike. Just not sure what website to look at. If you didn't get it from any other website maybe suggest me with a website to get my bike parts from. Thank you.
I ordered all of my parts from Source BMX, Empire BMX, and Dans Comp. (be careful ordering from Dans Comp because many of my friends have said you might not get what you ordered, but I've never had a bad experience).
Beautiful frame, wish this dream build had better cranks tho. Perfect for a beginner but If I was building a dream bike I'd pick 2peace Odyssey cranks that will literally out last the frame and could use on future builds..
Nice bike and nice garage too! I was wondering if you custom made that bottom bracket installer? It's a good and simple idea if you did.. Have fun with your new bike!
Great video. When installing pedals, the threads should be greased and tightened very hard. A trick to make it faster and to not drop the wrench is to spin the crank arm instead of the wrench.
BB press is home made with a piece of threaded rod, couple of nuts and washers. Works great and is just a few bucks at the hardware store. Feedback Sports Pro Elite work stand.
bro this is what I've been looking for, someone who builds a dope bike, step by step
Ernesto V Thank you! 🙏
@@VansonG rrrrrofr
Yep I’m over here not organized at all hahaha
Same here. I’m planning on even building my own bike as well. Been wanting to since I was a kid
@@ImJojo. go for it , I stripped a bike and transfered everything to a new frame and when the parts are laid out there not really much there.
I’m jealous of how organized his toolbox is
Travis Barber, III its slots for everything
Lmfao makes me feel like I won’t know what tf I’m doing😭😭🤣🤣
Me to
Same
Im jealous that he have toolbox bruh
The fact that you used a home made bearing press instead of beating in your bottom bracket with a hammer made me like this video. This is how bikes should be put together
Exactly
True that bearings should be pressed in vs hammering. I’d recommend only doing one bearing at a time though and I wasn’t able to tell if he used the spacer for the bottom bracket. For an 8 spline crank it’s not a huge deal imo, but for a 48 spline crank you’d really want it in there if you care about making your bearings last.
It's my first time to see a build with the chain at the left side.
Awesome build. I did my dream build a few months ago. Flybikes Tierra 20.6 frame black w/ pink and white sticker kit, Odyssey r25 fork black, Odyssey headset hot pink, Sunday freeze stem black, Primo samsquatch bars 9 inch black, Odyssey mid lever hot pink, sunday jake Seeley grips pink and black swirl, Odyssey par ends black, Odyssey slic cable hot pink, Sunday crank 170 black, primo Spanish bottom bracket white, Odyssey LaGuardia sprocket 28t black, Odyssey twisted PC pedals pink and black swirl, Odyssey pivotal seat post 180mm black, bone deth vibrator pivotal seat leopard print, Odyssey evo brake hot pink, Odyssey ghost brake pads clear, g sport roll cage rims 36h hot pink front and rear, titanium spokes anodized black, Odyssey vandero front hub female axle black, Odyssey clutch v2 freecoaster rear hub 9t female axle black, haro lineage park pegs x4 hot pink, Odyssey path tires 2.4 front and rear black, Odyssey tubes, Odyssey bluebird chain black
That sounds AWESOME! 🤘
That’s so dope man
This one video taught me how to build my own bike. Very straight and simple thanks bro!
Nice to see, young kids working that good and built bikes themselve!!
Pretty solid setup 🤷🏼♂️ the colorways sick fr
The tool you made for installing the bearings is awesome
It works really good and simple to make.
@@VansonG do you think you could do tutorial on how to make?
Beautiful build, nice workshop and riding, but I'd recommend using hub guards.
When ever I c a dream build from someone like this I gotta stop by and drop a like
props for building it the right way. your dad must be proud!
What a nice tool cabinet you got there
1,000 Gold Stars for giving us a $5 solution to pressing in a BB!!!!! Can I get and Amen!?!?
Amen brother!!!
Oh my god... his tool box is amaziiiing
Its the besssssst! 🤩
He carefully presses in his bearings while I just hammer mine in lmao
Lmao same
The old Sam Pilgrim technique
primitive but effective lmao🤣
@@morxvxx lmao exactly
🤣🤣🤣🤣🤣🤣
Hey just a pro tip: make sure when you use those wrenches you’re turning them the opposite way the head is going. For example, when you installed the BB they were being turn the wrong way at the beginning. It just prevents the possible of stripping anything and making the wrenches last longer
Nice technique for getting those bearings in nice and snug
Nice SUNDAY BMX want it
U can’t leave ur garage open w those expensive bikes in the garage man ! Beautiful bike
Right!! Once my 3yr old son was looking out our door into the garage and all I heard was "that's my daddies bike" I never ran so fast to my garage lol. Was an old s&m build.
now that is a good way to install a bb. no hammer needed.
OMG U PLAYED LIL PEEP MY FAVORITE ARTIST
RIP😭❤️❤️
❤️❤️❤️
Imagine living lil peep
😬
Music made me crave lil peep 👀 im not even a huge fan its just weird hearing the song without the words. Dope bike dude
You have a great taste of color
Thank you 🙏
Great taste and nice colors man, beautiful bike, congrats
Enrique Pastor Thank you!
This kid flips his wrenches around like a drummer in a rock band ! Awesome , or sick or dope ..... whatever you kids are saying these days !! No disrespect just funnin"
Good skills kid, your father toolbox is impressive, look after it, it'll be your one day!
Beat type star shopping i like bro, nice build
great bmxa you did dude I have a similar frame and it drives great
Good job bro 👌
sick new bike v man
Nice build buddy cool Color match 🤙🤙
Thanks for the vid bro. I have a few more parts for my Sunday Soundwave coming in. Might do a video too. Respects 😎🤜🤛 And Subscribed!
🙏
Please how much does that bike cost?
So great bro ❤❤❤❤
Where'd you buy your bike parts from.
Im planning on building my own bike.
Just not sure what website to look at.
If you didn't get it from any other website maybe suggest me with a website to get my bike parts from.
Thank you.
I ordered all of my parts from Source BMX, Empire BMX, and Dans Comp. (be careful ordering from Dans Comp because many of my friends have said you might not get what you ordered, but I've never had a bad experience).
Vanson G
Is thesecretbmx.com a good website to get bike parts?
@@isiah1808 Yes
Dream toolbox/organizer more like
Music Lil Peep star shoping
I wish I had that too
❤️🥺
This is amazing, earned a new sub!
When i get rich i will buy this bike ☺😪
Same
Nice build🔥
Wonderful video and wonderful bike, and your made it up by yourself! I have no words.
By the way, love the Lofi music
I wish i have that complete tools cabinet,😍
Beautiful frame, wish this dream build had better cranks tho. Perfect for a beginner but If I was building a dream bike I'd pick 2peace Odyssey cranks that will literally out last the frame and could use on future builds..
Very nice🥰🔥
Nice bike and nice garage too! I was wondering if you custom made that bottom bracket installer? It's a good and simple idea if you did.. Have fun with your new bike!
I did make that bottom bracket installer, thank you for noticing.🤛
Cool! Absolutely man and honestly I will definitely use that method instead of the ol rubber mallet and 2x4, thanks for the idea👍👏👍
I wish i had like this 🥺
Good job
2:34 ish. Why didn't you just use the quick wrench on the side for tightening?
Really nice bro
So satisfying
such a nice build, perfect but no hub gaurds? Why spend so much to just have your wheels get destroyed...
I'm getting guards soon
You'd think they'd come with
Brooo nice vid ^^ i love ur Toolbox, whats the name of it?
Teng Tools, they're awesome!! Check them out.
Muy buen video amigo, buena calidad y contenido, felicidades
Great video bro nice work
awesome 🖤🖤🖤😘😘😘👌🏻👌🏻👌🏻
Min. 14:00 some lil peep star shooping
yooo seattle crew
Nice bike i like that that's my dream bike
Great video. When installing pedals, the threads should be greased and tightened very hard. A trick to make it faster and to not drop the wrench is to spin the crank arm instead of the wrench.
No
Love the navy and gum. How much did it cost?
The bike costs about $1,200
awesome🤘🏽
What type of bearings are thoose? Awesome vid btw
Lucky, I wish I had the money to build my own bmx
Get a job
Nice build dude, What size tyres did you go with front and back?
The little peep beat. Thank you.
Nice bike
Thinking about getting the FitBikeCo Freecoaster wheel set, How have they been holding up? have they given you any problems?
I've rode them on 2 different bikes and they have held up really well and I have head 0 problems
@@VansonG alr thanks
Is there a specific way to tight the cranks? Or i can adjust first the screws on the sides and after the one above?
Nice build, what bike work stand is that?
Feedback Sports Pro Elite Repair Stand. It's awesome!! :)
Nice ....what model bike stand is that?
Feedback Sports Pro Elite work stand. Works great!!
Essa BMX ficou top 🤑💵😋🥰💪😎
Crank suggestions ?
Singhh price range?
Vanson G like 50-100 cad
@@Frontran Jet BMX Pro Cranks (that's what I am currently riding)
Oh yeah and where you get the things from
12:56
what do you call those two long tubes?
Which bottom bracket press do you use? Also, which bike stand?
BB press is home made with a piece of threaded rod, couple of nuts and washers. Works great and is just a few bucks at the hardware store. Feedback Sports Pro Elite work stand.
Hey what size tires did you put on? They look awesome btw
Hey what’s the break lugs you got on your Sunday cos I need some for my hyper
Yeahhh bro🔥
Nice bro..
Can you please list all the items and tools you used in performing all this process
OoOoO very nice bike
Thank you very much 🙏
Dude, everything is okey, but you forgot about very important thing- about hubguards! I believe you will put them later
Awesome!!
Hey, I'm wanting to get back into BMX and I'm older (39). Is their a budget or entry level Sunday bike thats good?
Bro, do you have a page or a store where you sell bmx??
16:11 can some please tell me, what is that called he was putting on? Pleaseee
2 stunt pegs
Super cool
year later and still mint
I don’t understand why you needed 2 socket wrenches when you did one at a time??
Super video
What do you like riding the most?
What was the tool used to press the bearings in?
That's a good old fashioned threaded rod with washers and nuts...Homemade bearing press!! Works great :)
Sexy bike build 🔥🔥🔥
What frame did you use?
Check description👍
How do you know which side sprocket goes on or does not matter??
How much for all the parts in the build?
Insert Name about $1,300
Haha galing mag ayos ng bike pahinge nalang ng bike
What hubs and rims you use