hey so, I'm a heavy equipment mechanic and one trick to get bearings to go in is to throw 'em in the freezer for few hours. when you take them out install them promptly before they have a chance to warm back up to room temp. maybe even heat the bb a bit but NOT with a torch!
@@Fax_my_pants a rubber mallet can’t knock bearings in. The hammer works fine it’s just a little risky. As long as you tap it evenly around the outer part of the bearing it doesn’t damage anything.
A threaded rod a couple bit washers and two nuts you could make a squeeze press to install those bearing without hammering them or harbor fight make a tool that goes over them bearing so you wont chew of the bearing hammering it in.
I just ended up with a rhd hub, and since my sprocket is guarded, and doesn’t hit the ledge, it’s fine. Also, I don’t want to pay $360 for a new hub when mine is perfectly fine.
@memba berryare you grinding on the same side as your drivetrain? If so than I recommend hub guards as you will be damaging your chain/driver. If you only intend to grind on the non drive side, there not absolutely necessary but I do still highly recommend them.
Bro no utilices martillo de metal para meter los rodamientos se te pueden aboyar y no te van a servir más yo recomiendo un martillo de goma aunque sea y si no tienes coloca un trapo en el rodamiento y con algo ve pegando al rodamiento para que amortigüe el golpe saludos desde León gto
Este man es una pelota completa como se le va a ocurrir usar un martillo metálico para los rodamientos del centro Aparte de eso es una bicicleta muy hermosa
whats going on with the cinema hub guard i have the same one came with my freecoaster pretty sure it goes under the frame unless ur doing some whack spacer shit edit: lol just scrolled down
I’m running the 8 spline because it’s the only chrome crank I have, and I’m not really thrashing my bike. I do have 48 spline cranks, Èclat tibia/odyssey calibur. They just need paint, and it’s snowing rn
I have a hard time believing you actually RIDE this bomb-proof bike like it should be ridden after watching you assemble the hub guard (and for bb- use rubber mallet). Beautiful bike though
Nice!!
Thanks! I love the frame, it’s the only bike with the perfect geometry for me.
@@lukasstipp_bmx cool! It looks good and your video is great!! :)
Can i have 1
@@ahrondelacruz1108 nice try
@@lukaoss hehehe
I'm big jealous. This looks niceeee 🔥🔥
Not for long 😉
Daddy
I also
Inglish
Oi mim di Vouga ai
hey so, I'm a heavy equipment mechanic and one trick to get bearings to go in is to throw 'em in the freezer for few hours. when you take them out install them promptly before they have a chance to warm back up to room temp. maybe even heat the bb a bit but NOT with a torch!
Thanks that’s a great idea!
Awesome video!! Love the camera angles
I almost had an anxiety attack watching him batter those poor bb bearings 😂😂😂😳
Lol yeah I really need one of those park tool things
@@lukasstipp_bmx at least use a rubber mallet buddyy
@@Fax_my_pants a rubber mallet can’t knock bearings in. The hammer works fine it’s just a little risky. As long as you tap it evenly around the outer part of the bearing it doesn’t damage anything.
@@lukasstipp_bmx ahahaha Yh you really do bro! 😂😂
@@lukasstipp_bmx place a peice of wood over the bearing to even out the force of the mallet, it drives the bearing in more evenly as well
Love this man big fan of you and BSD love your vids and bike looks fire
Thanks!
A threaded rod a couple bit washers and two nuts you could make a squeeze press to install those bearing without hammering them or harbor fight make a tool that goes over them bearing so you wont chew of the bearing hammering it in.
Ho------LEE------SHIT! This is the single best piece of video ever recorded...EVER! AND...the best bike of all time in the universe.
Thanks lol
Sickkk! So glad I checked your channel out
thank you for this tutorial… finally i can install my bb bearings😛🙏 and i can build my dream bike
that looks sooo good bro
Seriously,I'm fall in love with this bike.ahhh so jealous.
That looks clean
Wow this looks like a sick bike
*_the video is perfectly shot! I would like to have a BMX like this_*
Yes
@@rajkumarbirajdar3565 no
LOVE YOUR VIDEOS
Sweet ride! 🔥😎
nice build, definitely upgrade those cranks as soon as possible, they’re cheap and when they break the medical bill will be a lot more than a new set
Bmx cranks don't break easily, you gotta put a lot of force, weight and pressure to break them, even if you have a 5$ set
@@Croccolucho your clearly a beginner
@@Croccolucho bro my friend just broke the same cranks and they were a month old...
@@413_k7 been riding for 6 years never snapped a pair of cranks except 1 piece cranks on my 1st ever bike
Samox cranks are bad? Please tell me
4:36 my head kinda hurts when you put the rear hubguard outside😆
i'm not only the one who've been chocked !!
its called dropout guard 😆
The protector you put in the peg and the painting goes inside hahaha
Gorgeous!!!!
Very nice.
I love this bike
Nice colour 👍🏽
Nice bike!
Buen trabajo broo sigue asi
Wow! Really nice!
Bro that is 🔥 i hope i could build mine soon
From PH
That quality is crisp af
I love this bike...
Very nice.
I love it.
Irado demais. Top!!!!
Muita foda essa bike 😍
Love the bike looks... anyway,what song is this?
Thats is really cool
Baka naman po..subrang ganda sarap sa pakiramdam magkaron ng ganyan
wow nice man
I got my own custom alvx build today
It’s so much better than my kush 1
Sick! 🔥
When you build a bike always clamp it by a seatpost .A cheap seatpost works great as a dummy post for builds .
Nice video but why did you install the hub guard out the drive side?
Love the video just 1 question why would you make your bike right hand drive if you grinding on your right
I just ended up with a rhd hub, and since my sprocket is guarded, and doesn’t hit the ledge, it’s fine. Also, I don’t want to pay $360 for a new hub when mine is perfectly fine.
@@lukasstipp_bmx make sense
@memba berryare you grinding on the same side as your drivetrain? If so than I recommend hub guards as you will be damaging your chain/driver. If you only intend to grind on the non drive side, there not absolutely necessary but I do still highly recommend them.
How i wish that someday i have bike like this🤔
what bottom bracket did you use?
i can't believe you rode bmx when you put the hubguard like that 😂😂😂😂
Holy headset spacers are those poverty cranks from 1996?
Dream ... Love from india
At 4:34 I didn't know that you have to fix the chain protector out side the frame! I thought it should be inside close to the wheel sprocket!
Go for it....slllammmm them bearings
Bro no utilices martillo de metal para meter los rodamientos se te pueden aboyar y no te van a servir más yo recomiendo un martillo de goma aunque sea y si no tienes coloca un trapo en el rodamiento y con algo ve pegando al rodamiento para que amortigüe el golpe saludos desde León gto
respect man good build and filming:)
Cio gkelglrltlt
😎
"I always dreamed of a clown bike with no rear end" -- Nobody, probably.
Este man es una pelota completa como se le va a ocurrir usar un martillo metálico para los rodamientos del centro
Aparte de eso es una bicicleta muy hermosa
Pensé lo mismo, y luego el hubguard. Facepalm. Aun asi el frame es hermoso.
Pone las. Guardas por fuera qué rayos quien las pone por fuera
te quedo fachera
((💀 Complimenti x il mostriciattolo👍))
so inspirational
What a color
Imagine being able to afford new parts
Imagine
I like the video
Wow so nice🥰🥰
Woher haben sie die Schutzteile die sie unter die Pegs getan haben? ich brauche nämlich welche
Always wanted a bmx .
What street bmx offset fork you use?
Luar biasaaahhh, kapan punya yaaa
Wow cool👍👍👍
What a bike
What site should i buy my bike from ??
whats going on with the cinema hub guard i have the same one came with my freecoaster pretty sure it goes under the frame unless ur doing some whack spacer shit
edit:
lol just scrolled down
Cool
Oooo that’s noice
argument getting a BSD over an S&M frame? Better quality or just personal preference?
Didn’t get an s&m because it’s like $600-$700 and the bsd had the geometry I liked.
SWEET!!.!!!!!!!!
Só vaaaaapooo 🙅🙅🙅🙅
Half a million views bro hahah it came up as suggested for me
Yeah I’m just sittin back and collecting ad revenue now lol 😂
Buenísimo.
Fua amigo alta bici
hey what music did you use?
🤩
Why are you still running an 8 spline? Good video and nice bike tho
I’m running the 8 spline because it’s the only chrome crank I have, and I’m not really thrashing my bike. I do have 48 spline cranks, Èclat tibia/odyssey calibur. They just need paint, and it’s snowing rn
I’ll make a vid on painting the cranks tho
And you're regular but your hubs aren't lsd haha
@@companionbmx404 lol yup, i got that shadow hub on Craigslist, and I love it. I don’t mind having to run drive side guards.
🚴♂️🏁🏁🔊🔊👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
1:44 should you use a rubberhammer instead of a regular one so you dont damage anything
Agreed i was cringing looking at that 😭😭
He used a full on claw hammer 😂
cool
I have a hard time believing you actually RIDE this bomb-proof bike like it should be ridden after watching you assemble the hub guard (and for bb- use rubber mallet).
Beautiful bike though
4:38 what's that called? i saw it multiples times but i don't know the name, i thing it's kinda important
😍😍😍😍😍😍😍😍😍😍😍
What is the top tube and wheel size?
Meu sonho é ter uma bmx!
What price did you get?
WOW
Freshhhhh💦🥴
Sweet I can't wait to ride and buy that after you beat the shit out of the bottom bracket.. take my money now
esta chida la nabajita
👌
Cuando papito te compra pero es Más Linda Cuando te lo armas Por tus Propios Medios 😍
Wish I had the money to do a dream build
BMX 💖💖💖💖💖😭😭😭
How much would that cost?
How much that run you?
Ooo migot
what the type of the headset
I also have the same but it need to be replaced asap
#help
Where can I buy this whole set?
nice build but the hubguard brooooo...
Why s driveside guard outside of the dropout