First thoughts as I was watch this 🤔 WOW, what a lot of work for what seems like a fairly straightforward part ?? But after reading the comments it was a little easier to understand someone has got the money to pay for it👍
Peter at Edge Precision (on here) did a real neat gopro case for his machine. You don't _need_ one but if you want a hands-off way to keep coolant off your lens it's a solved problem.
It's a flapper for a safety valve, used downhole in an oil well. These valves are fail-safe to seal the well in the event of something going wrong, to prevent uncontrolled oil or gas escape. These became mandatory in all wells after Piper Alpha.
Only thing I would of done different was to use the Sub to pull the stock before parting off. That way you don't have to manually pull it. Otherwise fantastic job.
How many milimeters/inches are left in to the core by grooving insert; If it is too little; Trying to avoid interruption on grooving insert will cause vibration on all other tools following, so that means bad tool life on these tools, If you have tried then decided to put grooving tool first, it is OK, no comment 🙂 Thanks for the video and S, F values 👏
That is some very clean programming. Nicely done.
Thanks!
Really slick programming and a very well shot video. Not enough good video out there showing off what a Y axis lathe can do, nice work
This was incredible! Also, that is one expensive tractor flap. 😂
First thoughts as I was watch this 🤔
WOW, what a lot of work for what seems like a fairly straightforward part ??
But after reading the comments it was a little easier to understand someone has got the money to pay for it👍
17-4! Yum Yum. I rather cut that all day then 304! Pretty darn nice programming.
Peter at Edge Precision (on here) did a real neat gopro case for his machine. You don't _need_ one but if you want a hands-off way to keep coolant off your lens it's a solved problem.
I hope this is for a rocket or missile....because it's a expensive-azzed way to make an exhaust flapper for your Farmall 🤣
It's a flapper for a safety valve, used downhole in an oil well. These valves are fail-safe to seal the well in the event of something going wrong, to prevent uncontrolled oil or gas escape. These became mandatory in all wells after Piper Alpha.
Nice work! Is your live tooling internally cooled? Mine has to have coolant going all the time………
No it is external coolant, I only have 1 each of the internal coolant live tools.
Only thing I would of done different was to use the Sub to pull the stock before parting off. That way you don't have to manually pull it. Otherwise fantastic job.
He probably has a barfeed
Nice work, did you get the cycle time?
❤
Dang it physical limitations of the universe. Why must you make sub spindles sound so?
How many milimeters/inches are left in to the core by grooving insert;
If it is too little;
Trying to avoid interruption on grooving insert will cause vibration on all other tools following, so that means bad tool life on these tools,
If you have tried then decided to put grooving tool first, it is OK, no comment 🙂
Thanks for the video and S, F values 👏