I don't understand Asobo Studio's thinking. Why make such a drastic change to the key mapping from their last game? It almost feels like a cheap way to increase play time because we have to study the keybinding page. Thank you for doing the hard work!
Great video, thanks. I haven’t been able to find speed brakes on the flight control surfaces tab? Any ideas? Im on xbox and a thrustmaster Hotus controller.
Hi! Quick Question: How do I fix my HOTAS Warthog overriding the Autothrottle? My Throttle jumps a lot around while using Autothrottle, since its trying to match my throttle input on my HOTAS every few seconds. 2.question: My rudder pedals start to drift from time to a certain direction, do you have any clue to improve on that in the sim? Its a hardware problem that I know, but maybe there is an advice because I tried a lot with the sliders of deadzones etc. but it didn't help. Thanks for any help in advance!
@@eugeneweb5969 Sounds like a controller conflict. Check all of your controllers and see if you have more than one button knob or switch bound to trim.
Controller player here, helpful video. Subscribed! Im struggling with certain functions with mapping inputs. Im trying to make the cockpit camera zoom using the controller & I cannot figure out the lockable controls. I can zoom with the mouse scroll wheel, and can see the binding for 'lockable zoom in out' But I dont understand what to bind to make it work. Also 'throttle detent' is an issue I am trying to solve right now, as the F18 doesnt have a linear throttle & is pretty unflyable. Apparntly I need to map 'throttle axis' to 'afterburner' to override this so you can go 100% not get stuck at 80% with a warning pop up requring a bound input to override it? Afterburner is bound to 'Y' and throttles set to 'increase' & 'decrease' not 'throttle axis'. This is all so confusing . I am very limited with my binding space on an Xbox pad, using multiple commands too allready (RT LT RB LB at the same time shuts down engines etc). The F15 doesnt have a throttle detent, so it goes to max 100%, same with most aircraft, but if I cant figure out how to make the F18 throttle & afterburner function the same, I cant fly it.
@ when I’m done setting it all up, I will be sharing my full controller settings so everyone on console or pad can enjoy the same experience! Thanks anyway it’s a learning curve!
Thx for the video. So if the Hotas throttle comes already with the bindings there is no need to configure anything else right or did I miss something.Being a senior it is all confusing.Your thoughts.
@@j_london9791 that’s not really a black and white question. It’s entirely possible you could use it right out of the box with no changes. It is equally possible, though, that you want to change just one button or one switch… That will be up to you of course.
Rudder Axis, click the gear icon, click Tweak action curve,move the adjustment for sensitivity to the left for for both +sensitivity and -Sensitivity try about -0.3. If it’s stuttering when you’re not touching it, add Dead Zone.
@@michelberube7345 no toolbar in VR or pancake mode? I have managed to see it on random occasions in VR, but most times it is not available. This is a bug that will need to get sorted out.
Sorry, I don’t mean primary and secondary flight controls, I mean primary and secondary bindings in the controls tab for your device devices like keyboards, flight sticks, etc.
@@t-rev1795 I do not recall the name of it. It was one of the suggested airports in the drop-down when you are setting up a free flight and choosing your departure.
@@MrQuest321 in this version of flight simulator, they appear to have made trim much more sensitive and it only moves a very small amount when you move your trim hat. This is how it should be. If you want it to move more you’ve got a hold down the trim hat.
@@trent_dyrsmid the issue for me I use the hat to look around. In 2020 I had my trim up and down set to prev and next on my thrust master. Now when I bind the keys. The trim wheel moves very little and never lower then 3.99 and never higher then 4.01. and if I take off. The trim seems to be stuck and I'm getting warnings all thru the cockpit. (I was using the PMDG 737)
@@trent_dyrsmid indeed. I'm waiting till the market place is released and the plane gets a official update. Look at the forums. PMDG wasn't even aware or gave the okay to release the 2020 planes for 2024.
Why didn't they use the 2020 settings? It's very confusing and buggy. Why are the sensitivity curves are static? You move the control it doesn't do anything.
I still can't seem to get trim to work, I turned off the AI trim and tried to bind the nose up and nose down but I can't get it to do anything. Anyone have any tips?
@@mikeculp92 I wish I had a solution for you. As long as you have, the trim aid turned off, and you have bound up and down to either a trim wheel or buttons, it should work. The one thing that might be causing you grief is that the controller profile where you bound the buttons might not be the active profile when you are trying to fly the plane. You should double check that.
@trent_dyrsmid thanks! I actually kept messing around with it and I think the input I was trying to bind it to was not working, once I picked another input I got it to work. My mistake!
Does anyone know the difference between "general controls" and "airplane controls"? Sorry if this question sounds a bit stupid, but I honestly don’t know the difference.
@@juandelgado1498 general controls are things like the camera angle in VR settings that are not specific to an airplane. Airplane controls are for things like throttle, primary control surfaces, secondary control, surfaces brakes lights, etc..
Took my first discovery flight this week - hooked and sorting out training
Don’t think I’d be here without this channel.
Thanks Trent!!
@@jonnygrande2586 cool!!
Finally, a button mapping tutorial that did some good thank you sir
@@Gunner11Bravo you’re welcome!
Now I actually feel excited about 2024 because now I can turn it back on and get in there and get my flight controls squared away
@@Gunner11Bravo Good to hear!
I don't understand Asobo Studio's thinking. Why make such a drastic change to the key mapping from their last game? It almost feels like a cheap way to increase play time because we have to study the keybinding page.
Thank you for doing the hard work!
@@eagflc you’re welcome!
Great video, thanks. I haven’t been able to find speed brakes on the flight control surfaces tab? Any ideas? Im on xbox and a thrustmaster Hotus controller.
@@dougbailey392 Sry, no. Thanks for watching!
Great video
@@treybrant4647 thx!
Thank you so much. I've been going out of my mind with the mapping situation 👍
@@jamiehughes2247 you’re welcome!
MSFS2024 detecting My hotas 4 but it shows a ? in the desciption page and i can not map anything
Hi! Quick Question:
How do I fix my HOTAS Warthog overriding the Autothrottle? My Throttle jumps a lot around while using Autothrottle, since its trying to match my throttle input on my HOTAS every few seconds.
2.question: My rudder pedals start to drift from time to a certain direction, do you have any clue to improve on that in the sim? Its a hardware problem that I know, but maybe there is an advice because I tried a lot with the sliders of deadzones etc. but it didn't help.
Thanks for any help in advance!
@@bluetactical_ I wish I had an answer to either of your questions, but unfortunately, I do not. Sorry!
Bless you
@@stevehoff 🙌
I trim the plane and the trim position returns to neutral, do you know how to fix?
@@eugeneweb5969 Sounds like a controller conflict. Check all of your controllers and see if you have more than one button knob or switch bound to trim.
Im having trouble setting up the breaks and sensitivity
@@centralflorida1stamendment659 Try adjusting the sensitivity curves on the axis.
If I’ve made changes to my Hutus one and want put it all back to start fresh. Should I delete the profile completely and plug it back in?
@@petejansen8098 yes
Controller player here, helpful video. Subscribed! Im struggling with certain functions with mapping inputs. Im trying to make the cockpit camera zoom using the controller & I cannot figure out the lockable controls. I can zoom with the mouse scroll wheel, and can see the binding for 'lockable zoom in out' But I dont understand what to bind to make it work. Also 'throttle detent' is an issue I am trying to solve right now, as the F18 doesnt have a linear throttle & is pretty unflyable. Apparntly I need to map 'throttle axis' to 'afterburner' to override this so you can go 100% not get stuck at 80% with a warning pop up requring a bound input to override it? Afterburner is bound to 'Y' and throttles set to 'increase' & 'decrease' not 'throttle axis'. This is all so confusing . I am very limited with my binding space on an Xbox pad, using multiple commands too allready (RT LT RB LB at the same time shuts down engines etc). The F15 doesnt have a throttle detent, so it goes to max 100%, same with most aircraft, but if I cant figure out how to make the F18 throttle & afterburner function the same, I cant fly it.
@@Get-Native Off the top of my head I don’t have a good answer for ya. Sry.
@ when I’m done setting it all up, I will be sharing my full controller settings so everyone on console or pad can enjoy the same experience! Thanks anyway it’s a learning curve!
@ sweet!
I'm one the career gameplay and my yoke is never set to normal
Hi! Can't find the name of the command to assign the PTT. Which one is it?
@@patrickduchesneau5040 You mean Push To Talk? If so, search ATC.
Thx for the video. So if the Hotas throttle comes already with the bindings there is no need to configure anything else right or did I miss something.Being a senior it is all confusing.Your thoughts.
@@j_london9791 that’s not really a black and white question. It’s entirely possible you could use it right out of the box with no changes. It is equally possible, though, that you want to change just one button or one switch… That will be up to you of course.
@@trent_dyrsmid Got it👍
✈️
My rudder is so twitchy, any thoughts on dumbing it down ??
Rudder Axis, click the gear icon, click Tweak action curve,move the adjustment for sensitivity to the left for for both +sensitivity and -Sensitivity try about -0.3. If it’s stuttering when you’re not touching it, add Dead Zone.
@@Dimebonics04 👍
Hi,Congratulations for your video!
I don't have tool bar in my new Msfs 2024,do you know why? Thank You!
@@michelberube7345 no toolbar in VR or pancake mode? I have managed to see it on random occasions in VR, but most times it is not available. This is a bug that will need to get sorted out.
Thank You Trent!
👍
I can’t find any information anywhere on primary verse secondary bindings on the controls. Does anyone know?
@@TheSaint226 primary controls are ailerons, rudder, and elevator. Secondary controls are things like flaps and trim.
Sorry, I don’t mean primary and secondary flight controls, I mean primary and secondary bindings in the controls tab for your device devices like keyboards, flight sticks, etc.
Where is that location you're parked at?
@@t-rev1795 I do not recall the name of it. It was one of the suggested airports in the drop-down when you are setting up a free flight and choosing your departure.
@@trent_dyrsmid Trent, look in your logbook and it will tell you where you were.
Yes, also interested.
@ T004 Quintin Lodge
I can't seem to get my trim set. I set up and down trim and when I'm on the plane. I barely moves or seems stuck.
@@MrQuest321 in this version of flight simulator, they appear to have made trim much more sensitive and it only moves a very small amount when you move your trim hat. This is how it should be. If you want it to move more you’ve got a hold down the trim hat.
@@trent_dyrsmid the issue for me I use the hat to look around. In 2020 I had my trim up and down set to prev and next on my thrust master. Now when I bind the keys. The trim wheel moves very little and never lower then 3.99 and never higher then 4.01. and if I take off. The trim seems to be stuck and I'm getting warnings all thru the cockpit. (I was using the PMDG 737)
@@MrQuest321 sounds like a bug. The sim has a ton of them.
@@trent_dyrsmid indeed. I'm waiting till the market place is released and the plane gets a official update. Look at the forums. PMDG wasn't even aware or gave the okay to release the 2020 planes for 2024.
👍
My controller not connected in devices list why
@@7lc-e4t don’t know.
Why didn't they use the 2020 settings? It's very confusing and buggy. Why are the sensitivity curves are static? You move the control it doesn't do anything.
@@hueyfoo bugs yet to be fixed
I still can't seem to get trim to work, I turned off the AI trim and tried to bind the nose up and nose down but I can't get it to do anything. Anyone have any tips?
@@mikeculp92 I wish I had a solution for you. As long as you have, the trim aid turned off, and you have bound up and down to either a trim wheel or buttons, it should work. The one thing that might be causing you grief is that the controller profile where you bound the buttons might not be the active profile when you are trying to fly the plane. You should double check that.
@trent_dyrsmid thanks! I actually kept messing around with it and I think the input I was trying to bind it to was not working, once I picked another input I got it to work. My mistake!
@ yay!
Credits for title? Haha
@@AirborneGeek ✈️
Does anyone know the difference between "general controls" and "airplane controls"? Sorry if this question sounds a bit stupid, but I honestly don’t know the difference.
@@juandelgado1498 general controls are things like the camera angle in VR settings that are not specific to an airplane. Airplane controls are for things like throttle, primary control surfaces, secondary control, surfaces brakes lights, etc..
Bro mostly everyone is not using a keyboard.....are you kidding me