How To Sharpen A Spoon/Hook Knife & Twca Cam - Nic Westermann
Вставка
- Опубліковано 6 сер 2024
- I spent time with renowned tool maker Nic Westermann of ‘Hewn & Hone’ at his workshop in rural Wales
=============================================================================
Materials used and referenced in this video:
Stropping - www.hewnandhone.co.uk/product...
Abrasives - www.hewnandhone.co.uk/product...
=============================================================================
Connect with Nic using the links below:
Nic Website - www.hewnandhone.co.uk
Nic Instagram - / hewnandhone
=============================================================================
The other videos I filmed with Nic Westermann:
Nic Westermann - Important updates, Ordering tools, Waiting list, Etc - • Nic Westermann - Impor...
Hewn & Hone - Introduction by Nic Westermann - • Hewn & Hone - Introduc...
[Step by Step] Build A Two & Half Brick Forge - Nic Westermann - • [Step by Step] Build A...
(Pt 1/5) How To Make A Turning Sloyd Knife - Forging, Annealing & Rough Shaping - • {Pt 1/5} How To Make A...
(Pt 2/5) How To Make A Turning Sloyd Knife - Heat Treat - • {Pt 2/5} How To Make A...
(Pt 3/5) How To Make A Turning Sloyd Knife - Establishing Profile & Grinding Bevel - • {Pt 3/5} How To Make A...
(Pt 4/5) How To Make A Turning Sloyd Knife - Handle Making & Fitting - • {Pt 4/5} How To Make A...
(Pt 5/5) How To Make A Turning Sloyd Knife - Sharpening & Maintenance - • {Pt 5/5} How To Make A...
Spoon Knife Edge Geometry - • Spoon Knife Edge Geome...
How To Sharpen A Spoon/Hook Knife & Twca Cam - *THIS VIDEO YOU ARE WATCHING*
How To Make A Kolrosing Knife From An Old Drill Bit - • How To Make A Kolrosin...
How To Hollow Grind & Sharpen A Sloyd Knife - • How To Hollow Grind & ...
=============================================================================
Below is a timestamp of all the sections in this video:
(Click on the time on the left to go straight to that section)
00:00:00 - Start
00:00:09 - Intro
00:02:38 - Spoon knife edge geometry
00:05:35 - Temporary handle
00:06:18 - What is a twca cam
00:08:21 - 600 grit diamond film
00:10:55 - 3,000 grit diamond film
00:11:58 - Damaged blade
00:13:22 - 3,000 grit diamond film
00:13:47 - Removing burr
00:16:28 - 14,000 grit diamond film
00:17:10 - Strop burr
00:17:49 - Easier to sharpen
00:18:19 - Different bevels
00:20:04 - Rod diameter
00:21:10 - Hewn & hone
00:22:55 - How often should you sharpen
00:25:13 - Storing tools after carving
00:27:06 - Conclusion
00:30:50 - Outro
=================================
As always I appreciate you watching
Take care
Peace
Zed
#spoonknife #sharpening #twca - Розваги