Good Bye Plumber's Tape - This is Better

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 231

  • @SilverCymbal
    @SilverCymbal  4 місяці тому +26

    Nothing in this video is sponsored - You can't make your own so if you want to buy some amzn.to/3XfqMZ0

    • @bikeny
      @bikeny 4 місяці тому +1

      Looks good. Question: your link brings us to the item and it's being sold & shipped by Interfaceglobal. The photos show labels in what I am guessing is German. As a result, the ETA is the middle of September. Is the same stuff you are showing us? Thanks.

    • @russellzauner
      @russellzauner 4 місяці тому

      Finally. When they started making dental floss out of plastic tape I switched to flossers that still have a string...it's useful now.
      The downside is that floss is probably more expensive than the actual sealing cord. lol gotta love hacks that hack your wallet lol

    • @pfoxhound
      @pfoxhound 4 місяці тому

      Currently unavailable

    • @joshuadavis1770
      @joshuadavis1770 3 місяці тому

      Question on your example. You stated 45 degrees but in the video it sure looks like that was a 90 degree adjustment. Do you expect to see a leak with a 90 degree adj?

    • @filonin2
      @filonin2 3 місяці тому

      Why do you keep saying it's important to have no teflon? Teflon MANUFACTURING releases PFAS, not the teflon itself.

  • @Niebemoeie
    @Niebemoeie 4 місяці тому +87

    As a plumber, i dont use anything else but Loctite 55. It is the best, plain and simple.

    • @em0_tion
      @em0_tion 4 місяці тому

      My first thought as well, even as a non-plumber! 👌😂

    • @mkoco
      @mkoco 3 місяці тому

      Same here!

    • @patrickhayes3099
      @patrickhayes3099 15 днів тому

      How l9ng has this been available?

  • @hasanali-us7jz
    @hasanali-us7jz 4 місяці тому +157

    mia caught me offgaurd 🤣

    • @bikeny
      @bikeny 4 місяці тому +3

      Who is she? Is she just a screen grab from a floss product?

    • @mohammedgoder
      @mohammedgoder 4 місяці тому +42

      He's a man of culture.

    • @nils1953
      @nils1953 4 місяці тому +5

      ​@@bikeny yes

    • @mohammedgoder
      @mohammedgoder 4 місяці тому

      @@nils1953 dkm

    • @jasonrahimzadeh2342
      @jasonrahimzadeh2342 4 місяці тому

      Silvercymbal more like Silverstein. Porno addict

  • @_SurferGeek_
    @_SurferGeek_ 4 місяці тому +56

    What's old is new again. Coated hemp cording was used *many* years ago... My grandfather described it to me probably 30+ years ago.

    • @SilverCymbal
      @SilverCymbal  4 місяці тому +9

      I agree, and the fact they left teflon out was a very smart move

    • @SoberAddiction
      @SoberAddiction 4 місяці тому +7

      @@shazam6274 Watch the 2019 film Dark Waters and you might rethink that.

    • @mkenyon7429
      @mkenyon7429 3 місяці тому

      @@SilverCymbalIt is PTFE. And currently PTFE cannot be made without the high temperature fluorocarbon surfactants that are on the bad list. The do check the final content. As of a year ago a company in India was almost done with a new process.

  • @Leonardokite
    @Leonardokite 4 місяці тому +11

    Interesting. Once again you have come up with new product that I have never heard of and that is obviously very useful. Thank you sir!

  • @ranger178
    @ranger178 2 місяці тому +5

    pipe fitters at work used to use a teflon thread in the groves with pipe dope over it for a really secure seal.

  • @markasteelsr.5990
    @markasteelsr.5990 3 місяці тому +4

    My sentiments are that I need all the help that I can get. This product is a definite upgrade, worth purchasing.

  • @AmigaA-or2hj
    @AmigaA-or2hj 3 місяці тому +3

    One time, I was looking for toothpicks and dental floss. I couldn’t find any. There was a toolbox nearby, and I decided to use PTFE tape. Works!

  • @vladislavmikhailov3267
    @vladislavmikhailov3267 4 місяці тому +27

    I have been using this type of sealing (i am not a professional, just for personal applications) for about 10 years, and yeah, this stuff is way better than PTFE tape for water supply.
    For better results, try to cover cross-sections not in one spot, but instead all around the thread you're sealing, and don't be afraid of not following the thread, you should better cover all the thread with almost chaotically placed seal. From my understanding, this type of seal works by creating sort of labyrinth between the threads of the pipe and the seal strings itself, thus not allowing water to leak. Compared to the regular PTFE tape, which, once adjusted, starts to leak because there's no labyrinth, and water immediately gets way between thin layers of the tape.

  • @ramosel
    @ramosel 4 місяці тому +11

    I have used it. I've kept in in my chemicals cabinet for years. like everything else, I have had it leak. It's really good on "loose" connections. My "go to" is still Teflon tape AND Rectorseal.

    • @Pepe-dq2ib
      @Pepe-dq2ib 15 днів тому

      Same here, but i use Tru-blu instead of rectumseal. Loctite 545 on pneumatic and hydraulic only though.

  • @Sceme1991
    @Sceme1991 4 місяці тому +6

    I've been a plumber for over 10 years and all I use is hemp and Unipak jointing compound. Works for every usecase, including glycol and doesn't really matter how much you apply it. It can even be undone for several turns and it still wont start leaking. There's a slight learning curve to it but but it's not rocket science. Most important thing is to apply it in the right direction and make sure it doesn't come out during tightering. With smooth threads, such as brass ones it's recommended to scratch them a bit first with a hacksaw blade for example. Helps it grip the hemp.

  • @bobthebuilder201
    @bobthebuilder201 4 місяці тому +29

    I use blue monster teflon and never have had a problem. 24 years plumbing.

    • @SlammatheJamma
      @SlammatheJamma 3 місяці тому

      Yeah been a Diyer for years. That's all I use too. Had 0 leaks. Bluemonster seems thicker than Teflon and extremely durable.

    • @montgomeryfitzpatrick473
      @montgomeryfitzpatrick473 3 місяці тому

      Blue Monster with Megaloc dope, 22 years

  • @markmonroe7330
    @markmonroe7330 4 місяці тому +2

    Excellent presentation. Thank you. Appreciate you sharing tidbit like this. Loctite has such a vast catalog of interesting stuff and I honestly don't know a fraction of it.

  • @mtranchi
    @mtranchi 4 місяці тому +89

    2:44 You twisted that 90 degrees...

    • @TheNatureGuy
      @TheNatureGuy 4 місяці тому +4

      Yes thank you!

    • @simongchadwick
      @simongchadwick 4 місяці тому +23

      Silver Cymbal uses *Metric* degrees, not *Imperial* degrees.

    • @andrewvirtue5048
      @andrewvirtue5048 3 місяці тому

      @@simongchadwick He's talking about angle degrees, not temperature degrees.

    • @jbweb
      @jbweb 3 місяці тому +4

      SC the type of dude to give us 2x effort

  • @nitdiver5
    @nitdiver5 4 місяці тому +66

    Reposition up to 45 degrees….moves it 90 degrees anyways.

    • @radian2323
      @radian2323 4 місяці тому +13

      Exactly what I was thinking. Lol

    • @kmg501
      @kmg501 3 місяці тому +1

      That proves it is twice as gooder!

    • @TheFarminMusician
      @TheFarminMusician 3 місяці тому +1

      @@kmg501 Half as badder

  • @ErebosGR
    @ErebosGR 4 місяці тому +58

    I honestly thought you were gonna use dental floss 😅😅

    • @SilverCymbal
      @SilverCymbal  4 місяці тому +8

      People have done it with floss, and I have seen it work. BUT they don't tell you its got like a 90% failure rate, I originally was going to try to make my own but it's not worth it. This little bottle would last most people years.

    • @WaxPaper
      @WaxPaper 3 місяці тому +4

      ​@@SilverCymbalthe inclusion of the floss video was really confusing, I didn't know until the very end that you weren't suggesting it as a replacement for tape. I still don't, now that I read this comment. Is that brand of floss better than tape? Is it made out of the same stuff as the Loctite product?

  • @jamescady723
    @jamescady723 4 місяці тому +1

    I can't wait to try it. Once again, you found a great product I never heard of. Thanks!

  • @brothermine2292
    @brothermine2292 4 місяці тому +16

    The label at 2:15 suggests the smallest pipe diameter with which this "floss" is compatible is ¹/₂ inch, not ¹/₄ inch.

  • @pofjiosgjsoges
    @pofjiosgjsoges 4 місяці тому +8

    My tankless water heater installer uses it. (EU)
    When I asked him about it, he said it was much better than ordinary Teflon tape despite the higher price.

    • @gg-gn3re
      @gg-gn3re 3 місяці тому

      the thread is way more expensive than the tape is... Also I have a pile of the tape since it comes with basically everything plumbing fixture wise.

  • @adisharr
    @adisharr 2 місяці тому +2

    Amazing! I had no idea this existed - thanks for the great demonstration!

  • @jerdog31
    @jerdog31 3 місяці тому +11

    I'm a third generation Master Plumber, I'm sure it works, but Teflon tape a little dope for lubrication on water works perfect keep up the videos!

  • @fang4853
    @fang4853 4 місяці тому +20

    I mean saying Teflon tape is not easy to use is by far the biggest stretch i heard in a while. Once you overlap it once it will not come off, extremely easy unless your a lemon.

  • @malachiteofmethuselah9713
    @malachiteofmethuselah9713 4 місяці тому +19

    Teflon tape was never meant to be a sealant. It is a solid lubricant.

    • @pasad335
      @pasad335 4 місяці тому +8

      All of my company's pipefitters use both tape and dope. I always thought that was strange until they said the same thing, tape is the lubricant not the sealant.

    • @gg-gn3re
      @gg-gn3re 3 місяці тому +4

      yea, which is why it still gets used on pipe with washer sealers as he got wrong in his other video. It is so you can remove the pipe and it hopefully doesn't get locked together years down the road

  • @kangaroogod
    @kangaroogod 4 місяці тому +2

    I was always told tape/dope is a lubricant. While I think this has a lot of legs, a sealing property is always preferred in my book…
    I would give it a try. Loctite should sponsor this and give samples…I mean,, I would for a nearly 100mil per year hvac,plumbing company and I buy a lot of stuff….

  • @markfisher1716
    @markfisher1716 3 місяці тому +1

    Thanks for showing this product! Got to go get me some.

  • @vPeteWalker
    @vPeteWalker 3 місяці тому

    This is excellent. I don't have a use for it, but I'm thinking about picking some up just to have for the next time I do. Much appreciated. Thank you!

  • @zacandmillie
    @zacandmillie 4 місяці тому

    I'm in Australia. I've never heard of this so just did a quick search and found it is available here and is discounted at the moment. I'm buying some tomorrow. Thanks.

    • @westernfrontproductions
      @westernfrontproductions 3 місяці тому

      Likewise, and this is perfect timing as just a couple days ago i needed something to seal metal to plastic threads (airbrush fittings).
      Often its frustrating when DIY channels from the US use a product that isnt available in Australia, or is way more expensive to source here.

    • @zacandmillie
      @zacandmillie 3 місяці тому

      @@westernfrontproductions After my first post yesterday I found Repco is selling it at a discounted price. Bought 3 lots today. should last me a long time.

  • @Jonkree
    @Jonkree 4 місяці тому

    I don't know if teflon tape in Germany is build differently, but I never got it to seal properly on the first try, so I switched to sealing cord a while ago and it never disappointed me. I even tried teflon tape on the intake and outlet of a pump again after watching your video, but I never got either end to seal completely.

  • @contidozack
    @contidozack 4 місяці тому

    I love watching your DYI stuff. Been subbed more than a year now.

  • @G.I.JeffsWorkbench
    @G.I.JeffsWorkbench 3 місяці тому

    I like it. Thx for sharing. Seems expensive at first glance, but I’m reminded how expensive my last leak was…. I guess amazon & loctite are getting more of my $$.

  • @d4ngerd4n
    @d4ngerd4n Місяць тому

    Always dope then tape for me, just what I was taught as a pipe fitter and it just works.

  • @larryseibold4287
    @larryseibold4287 3 місяці тому

    Very interesting
    Questions: What does it do to the friction (torque) compared to a dry fitting and ptfe? Is this an anaerobic sealant (does it harden in the absence of oxygen, ex 577)?

  • @wessuper9062
    @wessuper9062 4 місяці тому +1

    A single roll for all applications sounds good to me.. I'm like anything that saves space in my ever growing tool box..

  • @em0_tion
    @em0_tion 4 місяці тому

    Last year my pops blew my mind by using hemp from horse tail hairs. It still smelled like it too. 🤗😂 I dunno why you're showing us dental floss at all in this video, but the Loctite 55 is awesome! 🤘

  • @edover50
    @edover50 4 місяці тому

    Agian with the neatest stuff. I don’t see here in Canada other than Amazon and will order. Thanks Chris!!

  • @SirDadbod
    @SirDadbod 3 місяці тому

    from my understanding,,,nps thread can withstand loosening and maintain seal,,but npt must be secured till tight and any loose turn any degree breaks the seal...

  • @avocares
    @avocares 4 місяці тому

    I mostly use the thread sealant stick 504467. Will give this a try but seems like it's more tedious to apply than the stick. Does it turn to shreds when the fitting is removed like the tape does?

  • @mitchd949
    @mitchd949 3 місяці тому +4

    0:59 Mia is a well known industry professional with pipe

  • @royrice8021
    @royrice8021 3 місяці тому +1

    RectorSeal pipe dope was a favorite in the oilfield. We used soft set so you could break it out later. The hard set would egg a pipe before it would break! 🥵🥵🥵

  • @bickybickford
    @bickybickford 4 місяці тому

    Never tried it but I just bought it using your link. Thanks

  • @LocoTheSquirrel
    @LocoTheSquirrel 15 днів тому

    The 3am infomercial fumbling of the tape. If you have that much trouble then hire a plumber.

  • @jessiestienstra6350
    @jessiestienstra6350 3 місяці тому +1

    Teflon tape is only hard to use if you dont know how to use it, pipe dope is only messy when you use way too much, and either pipe dope or teflon only leak when you use them improperly. As a professional who works on plumbing and gas, high density teflon (wrapped properly and an adequate amount of times) and pipe dope never leaks and you get the best of both worlds. You dont have ti worry about misalignment to that degree if youre actually paying attention. A little misallignment correction with tape and dope has never caused any problems for me.

  • @actionjksn
    @actionjksn 3 місяці тому

    I would be willing to try this stuff if I ever saw it in stock, I've never seen or heard of it.
    If you know how to properly use the Teflon tape it works just fine and I don't have a problem with leaks. I've been doing this for about 30 years. What I usually do is wrap the pipe threads with the tape and then I apply a thin coat of pipe dope, which is what we call the thread sealant here in the United States. Other parts of the country may use a different terminology, I'm in the Midwest.
    One of the main things that you have to do correctly to have success with the tape is to know when to stop tightening the fitting. You have to tighten it far enough but you can't go so far that you end up stuck where you have to back it off. I never back off the fitting, if I estimate incorrectly then I remove the device or fitting and remove the tape and start again.
    If you do not wrap the threads correctly with the tape, what happens is as you are tightening it, your fitting just starts pushing the tape off of the threads. This causes you to end up with bare threads that have no tape on them, all the tape that you have applied is completely visible which is not good.
    If you do it correctly you will have a layer of Teflon tape covering the threads after you have screwed the piece on. There is more to it than just wrapping it in the correct direction, which is also important to do.
    The beginning of the threads should not be wrapped thick at all. If the beginning of the threads are wrapped thick, it will cause the fitting to push the tape right off of the threads and it will just plow the tape right off of the threads and leave them completely bare. There is some level of skill but it's not that complicated. I don't have problems with these pipe thread fittings leaking using tape or a combination of tape and pipe dope.
    There has been a quest since even before I started working in the trades to completely eliminate the need for skill at doing skilled labor. This is due to the ongoing quest to be able to do all this work with the lowest paid and unskilled labor possible. This is happening in all areas, plumbing, carpentry, drywall, including the finishing. They want to make it where complete idiots with no skill can do as much of the work as possible.
    Don't know how to the simple job of wrapping a pipe with tape and installing a valve without it leaking? Here use this new product, you can be as ham-handed as you want to and it will still work. I'm not a Luddite and I will use new technology, but I still know what they are doing, and the motivation is exactly what I said. If all you have available is regular Teflon tape, you still need to be able to use this approved product and not have leaks in a consistent way.

  • @gottagift
    @gottagift 3 місяці тому

    I use a good amount of salt in my pipe thread compound because it creates a lasting bond. While this product break down with the addition of salt?

  • @Tarzan0123
    @Tarzan0123 3 місяці тому

    It's a good thread sealant. I saw this video on day one and it reminded me to buy some more. I added it to my Amazon cart on that day. Amazon just notified me today that the original price on Loctite 55 just jumped up $6 more. That's since this video came out. How convenient for the Amazon seller's to get free? advertising and hike the price.

    • @SilverCymbal
      @SilverCymbal  3 місяці тому

      I got nothing for free. I wasn’t paid for the video and have never spoken to loctite.

  • @niki123489
    @niki123489 3 місяці тому

    We use a combination of teflon tape and hemp in our home bathroom. It worked better than just teflon tape.

  • @jeremyuncles4562
    @jeremyuncles4562 Місяць тому

    Teflon tape isn't supposed to be the sealing agent. It is supposed to lubricate the threads. The threads in tapered NPT are supposed to deform to create the seal. You need the lubrication to prevent galling. For the most part this also applies to pipe dope. The sealing thread on the other hand is far thicker and is designed to both lubricate and seal. the teflon thread fills the voids and is compressed. When you reposition it can expand enough to keep the void sealed. I need to add some Loctite 55 to my tool bag for certain applications. My go to at work is Loctite 567 thread sealent for most jobs and nickle impregnated teflon tape for stainless. But, to each their own. I'm always game to try new products.

  • @welrod94
    @welrod94 3 місяці тому

    I love the blue leak lock pipe dope. I would eat it if i could😂"not really but i do love it" i dont care if im doing gas fittings, water lines like tub spouts/showerheads or installing a water heater. I grab a jar and i know im set. I worked in 50+ year old apartments and ive never had a leak when first testing like i have with tape. I also have never had a leak from anything installed years later with the blue leak lock. So for me and everyone ive known its basically the best! The only negative is yes its blue and yes it will stain your tools but its thick enough you shouldnt really ever get it on carpet or anything. If you can avoid making a mess with purple pvc primer then leak lock will be a piece of cake. Leak lock isnt as clumpy as the tulype in your video just make sure your stir it with the brush because if its unused or sat awhile the oils will seperate but a couple quick stirs and its mixed. I mean use what you prefer or comfortable with but if you use regular thread tape i can promise you will love leak lock. Its like gold to us😂
    **im sure this tooth floss is great maybe even better but im set in my ways and its hard to change whats working perfect for me

  • @LoneHawk
    @LoneHawk Місяць тому

    Glide has PTFE too

  • @davefoc
    @davefoc 3 місяці тому

    I've had trouble sealing the connection to plastic irrigation valves. This looks like it might solve that problem.

  • @JCWren
    @JCWren 4 місяці тому

    I can't find this on Henkel's US website anywhere. What is the difference between the two Amazon links? As near as I can tell from the inadequate pictures and product description, one maybe has a raised cutter and the other doesn't? Why would I pick one over the other?

  • @fizixx
    @fizixx 4 місяці тому

    Never heard of it, but am going to try it! Thanks for this info!

  • @sergeyb8
    @sergeyb8 4 місяці тому

    Can you use it on brass gas fittings? Thanks for this info

  • @andrewvirtue5048
    @andrewvirtue5048 3 місяці тому

    So it can be used on Brake Lines?

  • @TheJoaolyraaraujo
    @TheJoaolyraaraujo 3 місяці тому

    Thank you for the tip. I found here in Brazil.

  • @SunriseLAW
    @SunriseLAW 4 місяці тому

    For years I have been twisting regular plumber's tape to make it into a string. Then I use it similar to the stuff in the video.

  • @kevinhullinger8743
    @kevinhullinger8743 4 місяці тому

    Thanks first time hearing about this product. I will purchase for certain.

  • @Hogzsnotzv2
    @Hogzsnotzv2 13 днів тому

    Teflon tape is like .99$ per roll and it works. How much is the LT55?

  • @robcole332
    @robcole332 4 місяці тому +1

    That thumbnail caught my eye. I’ll be getting that

  • @joephillips6634
    @joephillips6634 3 місяці тому +2

    You said 45 degrees but then did a 90 degree adjustment 😂

  • @MyBiPolarBearMax
    @MyBiPolarBearMax 4 місяці тому +15

    I havent come across a smile like Mia’s in quite some time.

    • @lilq824
      @lilq824 4 місяці тому +3

      @mybipolarbearmax Teeth as white as a pearl necklace!

    • @drumtwo4seven
      @drumtwo4seven 3 місяці тому +1

      face only a mother could love

  • @BumBee22
    @BumBee22 4 місяці тому +3

    Worth a try.

  • @ironchefboyardeee
    @ironchefboyardeee Місяць тому

    The ironic thing is that some floss was found to contain PFAS. I’m pretty sure it was Glade and some other generic brands.

  • @W.Vanderbilt
    @W.Vanderbilt 4 місяці тому +2

    We used this or something very similar when I was in Iraq whenever we had a fuel leak on JP8 fuel trucks

  • @CliffsideStables
    @CliffsideStables 4 місяці тому

    1st link is not available on AMAZON. Tim in northern TN

    • @SilverCymbal
      @SilverCymbal  4 місяці тому

      If you play the video again I was able to add it to the "products" section and I believe its in stock there

  • @wkrp10splayer19
    @wkrp10splayer19 4 місяці тому

    does it work on petroleum gas piping ?

  • @robertfindley921
    @robertfindley921 Місяць тому

    I use Teflon paste. It's easy and never fails me. But it is a bit mess.

  • @Grinchy1230
    @Grinchy1230 4 місяці тому +5

    I would probably try it on something for myself before committing to it for my customers.

  • @reelsouthernadventures9933
    @reelsouthernadventures9933 3 місяці тому +3

    Dope and tape thanks never had a leak in 37 years.

  • @hexhead5732
    @hexhead5732 3 місяці тому

    Teflon tape and pipe dope works great old school

  • @evildead1791
    @evildead1791 22 дні тому

    Different strokes I suppose, nothing wrong with tape or pipe dope, if you want a really good seal just tape and dope the threads, but honeslty with a high quality tape like blue monster or megalock, 99 percent of the time youll be fine with just tape.

  • @catranger01
    @catranger01 3 місяці тому

    Good luck using this on stainless to stainless fittings because they will certainly gall long before sealing,

  • @FROG2000
    @FROG2000 3 місяці тому

    How do you know this is not just strings of Teflon? It sure looks like it.

  • @LaconicMind
    @LaconicMind 4 місяці тому

    Cool I've mostly been using megaloc (which uses kevlar instead of PTFE) when i can get away with it.

  • @Freedomishere-im6ug
    @Freedomishere-im6ug 3 місяці тому

    Packing gland for pipe threads

  • @RSBot2jar
    @RSBot2jar 3 місяці тому

    The reason I don't like using this is because the loctite hardens and it's sometimes really difficult to undo the fitting afterwards.

  • @repairitdontwreckit4257
    @repairitdontwreckit4257 3 місяці тому

    Let’s not over think it. As someone else said if applying teflon tape is hard you may need to take some lessons. If you’re wearing vynil gloves that are a little loose you may have to go a little slower. There’s all kinds of stuff out there for different applications. I’ve found the thin white teflon tape works for most threads. If you’re reusing fittings that have been stretched some of the thicker tapes or paste products may be better. As stated in the old days hemp and pipe dope was used especially on large cast iron fittings used in hot water
    and steam systems.

  • @qaziqalander
    @qaziqalander 4 місяці тому +2

    This is almost the same centuries old zinc oxide paste type material that was used with cotton or jute fibre

  • @godsblade300S
    @godsblade300S 4 місяці тому

    ✌️😜 Always something useful for a project now, or future use😁👍 Thanks Brother 💒⚔️ God Bless us All 🇺🇸🙏✝️

  • @mwalloch
    @mwalloch 3 місяці тому

    PTFE is a nasty substance. Thanks for the cool tip 😎

  • @4362mont
    @4362mont 3 місяці тому

    I'm going to get some before I need it.

  • @PammyRock
    @PammyRock 4 місяці тому

    Thanks for another great video...

  • @MissionaryForMexico
    @MissionaryForMexico 3 місяці тому +1

    Good grief! Your kidding right!

  • @AF-O6
    @AF-O6 3 місяці тому

    Over nearly 40 years I've used teflon tape, pipe dope, or silicone, and have yet to have a problem with gas or water. I have more problems with "plumbers" who put freaking teflon tape on everything, whether or not it's required.
    For what it's worth, in diving, firefighter SBAs, and PCP airguns hold 300 BAR with only hand tight fittings, so obviously plumbing has not kept up with technology.

  • @davidtrautman6482
    @davidtrautman6482 3 місяці тому

    A lot of examples where the teflon tape is being applied improperly.

  • @Forrest-Jackson
    @Forrest-Jackson 22 дні тому

    Been using the tape/dope combo for the last few decades and I've never had a leak.

  • @tjpprojects7192
    @tjpprojects7192 3 місяці тому +1

    Been using horses to seal pipes for 135 years and not a single pipes has taken a leak on me yet.

  • @voiceofraisin241
    @voiceofraisin241 4 місяці тому +4

    At :04 and :28 he is wrapping the tape in the wrong direction.

  • @drumtwo4seven
    @drumtwo4seven 3 місяці тому

    T Plus 2 home Depot works GREAT

  • @bootburner4544
    @bootburner4544 3 місяці тому +3

    At 0:26 you use video showing the *wrong* way to wrap the pipe threads with teflon tape. How ironic! 😂

  • @kirkwilson6698
    @kirkwilson6698 3 місяці тому

    I'm amazed at the number of people who supposedly have problems with teflon tape. It isn't the tape that is the issue. It's your crappy joint work. Do better work and you don't need "Miracle Cures".

  • @snowgorilla9789
    @snowgorilla9789 4 місяці тому

    Been in Canadian heavy industry for 45 years and have never heard of it. Probably illegal up here because no french on the package

  • @Evan-lg1xp
    @Evan-lg1xp 3 місяці тому

    The biggest mistake people make is putting the tape on the wrong way lol. The tape needs go the way its tightened. I've seen many people put it on backwards.

  • @HPDrifter2
    @HPDrifter2 3 місяці тому +1

    Note to self: Never hire Silver Cymbal for plumbing job.

  • @DragonLawyer
    @DragonLawyer 4 місяці тому

    It’s already “unavailable” at both Walmart and Amazon 🙁

  • @CT9905.
    @CT9905. 3 місяці тому

    Plumbers pipe dope, used it forever!

  • @dnhman
    @dnhman 4 місяці тому

    Currently unavailable on Amazon

    • @SilverCymbal
      @SilverCymbal  4 місяці тому +1

      If you play the video again I was able to add it to the "products" section and I believe its in stock there

    • @dnhman
      @dnhman 4 місяці тому

      @@SilverCymbal thank you

  • @drumtwo4seven
    @drumtwo4seven 3 місяці тому +2

    THAT LAST VIDEO CLIP YOU PUT IT ON IN THE WRONG DIRECTION

  • @louf7178
    @louf7178 4 місяці тому

    Better than dope, and home plate is all you should be stealing. 😁

  • @asdfgoogle
    @asdfgoogle 4 місяці тому +1

    Looks nice!

    • @SilverCymbal
      @SilverCymbal  4 місяці тому

      Thank you. it seems like it would never work. That's what all the reviews say, and go on to say its awesome