Ok I replaced the top on ours about 10 months ago. Same rust location, all due to the bleach dispenser. After replacing the top I covered up the bleach dispenser with blue painters tape (really looks nice). Now my wife pours in the bleach directly to the tub after its fills with water. Works great now. The new tub shocks showed up yesterday and they will go in soon. This will be our second set on this washer. Good luck out there.
Unfortunately you spent most of the time telling us about the mic problems, mildew problems, and unboxing , then time-lapsed through the actual procedure of replacing the top cover.
I even turned it down to quarter speed to see what I could pick out but that turns it into a slide-show ... and no audio of him talking through what he is doing, what he sees and etc.
Don't waste your time. He never actually walks through HOW TO GET THE TOP off. I hate to sound unkind, but I'm already triggered because I discovered my $1200 washing machine is rusting away after 3 years.
I think they tried and it was dismissed. I spent almost 2 hours talking to customer service today and all they offered was a rebate if I buy a brand new one. 🙄
I have the same issue as well, and don't know what to do with it because it still works well. I stopped using chlorine in the dispenser about 3 years ago, but the rust just kept spreading.
@@josephgarcia2979 I repaired mine by taking the top off and wire brushing all the rust off and then using POR-15 to cover the rust spots and entire underside
Just ordered my new top and will be performing this replacement soon. Hopefully, this is not a PITA project. As for the new top, I'm considering adding some additional sealant around the bleach tray so that the new one doesn't rust out like original. This will be the last LG product I ever purchase...very poor customer service. They know this is a manufacturer defect and refuse to take any responsibility...the LG CS fool I spoke to said rust on top is not a warranty item...just spray some white paint on it.
You are phenomenal! Washer Works great, but as with you Rust 🥴! Washer 10 years old, ahhh the Good old days growing up when they lasted near 20 years. Long story short not with a Fat Wallet, bit the bullet. Purchased new one. Ahhh Well happy Wife. Thanks Bud!!!!
Another option is to sand to bare metal, paint with Rustoleum primer followed by matching appliance touch up paint. White is easy to find. Odds are your new panel will eventually rust in the same location because the factory paint does not appear to seal the steel against acid. It may help to apply some clear silicone in the affected area of the new panel. Poor paint selection, prep and seal at the factory. The edges of metal are the weak link for factory paint jobs. Once the corrosion starts, it will spread under the paint. They could have put a clear vinyl wrap over the steel in this location for pennies at the factory.
Is this still an issue with the brand new LG top loaders? I'm about to purchase one of their agitator washers. I currently have a very old Whirlpool and not only is the bleach dispenser rusted, there's rust in the painted/white drum. So, I know it was (at one point at least) an issue with Whirlpool washers as well.
I’m not sure if still a problem but I would bank that it is. Try to go stainless steel if you can. Most painted metal will rust at some point because metal is so thin on these and poor metallurgy IMO
When the top is off there are brackets on underside for lid’s hinges. You will want lid in open position for removal and reinstall because there are springs in the brackets. In the open position it takes the pressure off springs so they can be removed.
We have never, ever used bleach to wash clothes and our LG Waveforce rusted also. We have always poured Oxy Clean into the tub with our whites. It makes no sense why ours started rusting. It is completely corroded 9 years later! We love the washing machine except for the fact that it rusted and corroded.
Samsung has the exact same look as this washer with the same problem... one or the other company made this washer. samsung forums have the same issue... thanks for the vid
That one was a PITA. Door is spring loaded. Fasteners on on backside of lid. You’ll want to have top off and upside down propped up with lid open for removal and reinstall. Sorry, so many things I wish I videoed differently but I’m new at this and will be learning for awhile.
IMO it’s worth it. There are a lot of videos showing this that are much better than mine. I don’t have a studio nor do I get paid for any of my videos so yes it’s not going to be up to par with what some people need or want.
Could have been useful if less intro bs and slow down the actual disassembly please explain why I need to remove the back. Not disagreeing just short of actual explanation and demonstration.
www.ebay.com/itm/164682318981. Here is a relisted top from the same EBay lister. I apologize I either forgot or some of those get removed when they expire. Not sure but thank you for bringing it up.
Not to be a grammar nazi but... should be “in” not “on”. There is no problem with mildew on the painted surfaces. That might work great for doing a tub and hose clean which would be “inside”. I will definitely try this as the hoses were slimy with mildew substance.
@Julie Erdman I was given a Samsung Washing machine 4 years ago & never thought to open the lid & notice the rust stains in the fabric softener area. I was gonna save the machine until I moved into a House but now that I see the rust stain & I want to sell it, will this Sugelary mold remover do the trick or is it worth even selling ?
We also have the LG Waveforce. These are NOT CHEAP. It starting rusting around the same time as the one above, and as of yesterday I now have chunks of rust falling into my barrel with my clothes. This will be the LAST LG product I will purchase!! Fuming.
Oh look a “Richard” in the comments. You could have just asked how to take it out. I can’t video every part on taking something apart. I do this for free and constructive criticism is good and I like to know what I need to do better. What I don’t need is a “Richard” making nasty comments because a free video didn’t meet his exact requirements. Have a great day.
Ok I replaced the top on ours about 10 months ago. Same rust location, all due to the bleach dispenser. After replacing the top I covered up the bleach dispenser with blue painters tape (really looks nice). Now my wife pours in the bleach directly to the tub after its fills with water. Works great now. The new tub shocks showed up yesterday and they will go in soon. This will be our second set on this washer.
Good luck out there.
Unfortunately you spent most of the time telling us about the mic problems, mildew problems, and unboxing , then time-lapsed through the actual procedure of replacing the top cover.
I even turned it down to quarter speed to see what I could pick out but that turns it into a slide-show ... and no audio of him talking through what he is doing, what he sees and etc.
Don't waste your time. He never actually walks through HOW TO GET THE TOP off. I hate to sound unkind, but I'm already triggered because I discovered my $1200 washing machine is rusting away after 3 years.
My goodness! Same problem! This is NOT under warranty either. We should start a class action lawsuit. Thanks so much for this video.
I think they tried and it was dismissed. I spent almost 2 hours talking to customer service today and all they offered was a rebate if I buy a brand new one. 🙄
Yep the CAL was dismissed in June 2019
I have the same issue as well, and don't know what to do with it because it still works well. I stopped using chlorine in the dispenser about 3 years ago, but the rust just kept spreading.
@@josephgarcia2979 I repaired mine by taking the top off and wire brushing all the rust off and then using POR-15 to cover the rust spots and entire underside
Thanks for the tip.@@srschabel
Great tip, thanks. I noticed rust today and was shocked. My washer is only 3 years old
Same here!
Terrible rust around bleach dispenser happened to us also!!!
Just ordered my new top and will be performing this replacement soon. Hopefully, this is not a PITA project. As for the new top, I'm considering adding some additional sealant around the bleach tray so that the new one doesn't rust out like original. This will be the last LG product I ever purchase...very poor customer service. They know this is a manufacturer defect and refuse to take any responsibility...the LG CS fool I spoke to said rust on top is not a warranty item...just spray some white paint on it.
It’s not to bad to do. I highly recommend adding some sealer to that bleach tray! Good luck and take your time.
Oh it's not just LG Samsung Whirlpool All of them are having rust issue And these companies know it using poor quality metals 🤬
I believe they do it on purpose. The faster it breaks (of course after warranty) the faster we buy another to load the company’s pockets.
@@BugmanVlogs Replace it with a Speed Queen - their manufacturing of these appliances is top notch and will last you 25 years or so...
Mine is starting to do the same thing! It’s been driving me nuts! Not to mention it’s so hard to get down into the drum... lol
You are phenomenal! Washer Works great, but as with you Rust 🥴! Washer 10 years old, ahhh the Good old days growing up when they lasted near 20 years. Long story short not with a Fat Wallet, bit the bullet. Purchased new one. Ahhh Well happy Wife. Thanks Bud!!!!
You did a Great Job! Thats alot of work!
Thank you!
Another option is to sand to bare metal, paint with Rustoleum primer followed by matching appliance touch up paint. White is easy to find. Odds are your new panel will eventually rust in the same location because the factory paint does not appear to seal the steel against acid. It may help to apply some clear silicone in the affected area of the new panel. Poor paint selection, prep and seal at the factory. The edges of metal are the weak link for factory paint jobs. Once the corrosion starts, it will spread under the paint. They could have put a clear vinyl wrap over the steel in this location for pennies at the factory.
Thank you for the video. Can you add a link of this same video but at a normal speed?
Unfortunately I can’t. I moved and no longer have that washer.
Is this still an issue with the brand new LG top loaders? I'm about to purchase one of their agitator washers. I currently have a very old Whirlpool and not only is the bleach dispenser rusted, there's rust in the painted/white drum. So, I know it was (at one point at least) an issue with Whirlpool washers as well.
I’m not sure if still a problem but I would bank that it is. Try to go stainless steel if you can. Most painted metal will rust at some point because metal is so thin on these and poor metallurgy IMO
Yes, I have had my LG thinQ for about 1 year and recently I am getting rust stains on very expensive white clothing
Yes - class action suit.
Replacing my top. How did you remove the actual lid? Last peice to change to new and cant figure it out. Your hell is appreciated.
When the top is off there are brackets on underside for lid’s hinges. You will want lid in open position for removal and reinstall because there are springs in the brackets. In the open position it takes the pressure off springs so they can be removed.
We have never, ever used bleach to wash clothes and our LG Waveforce rusted also. We have always poured Oxy Clean into the tub with our whites. It makes no sense why ours started rusting. It is completely corroded 9 years later! We love the washing machine except for the fact that it rusted and corroded.
Samsung has the exact same look as this washer with the same problem... one or the other company made this washer. samsung forums have the same issue... thanks for the vid
You should not have sped up the part where you walked through the actual replacement
Thanks for the help
Need to see how to remove the glass door part
That one was a PITA. Door is spring loaded. Fasteners on on backside of lid. You’ll want to have top off and upside down propped up with lid open for removal and reinstall. Sorry, so many things I wish I videoed differently but I’m new at this and will be learning for awhile.
have you tried to use a petro tape, its an anti corrosion tape.
I have not. I’ve heard of it for other uses but not thought of for this. Not sure how aesthetically pleasing it would look for this but might work
All I need to know is if it’s worth replacing this top part vs just getting a new one. Labor/ parts cuz there’s no way I can follow this video.
IMO it’s worth it. There are a lot of videos showing this that are much better than mine. I don’t have a studio nor do I get paid for any of my videos so yes it’s not going to be up to par with what some people need or want.
@@BugmanVlogs thank you.
@@BugmanVlogs Where are videos? I can only find this one.
Could have been useful if less intro bs and slow down the actual disassembly please explain why I need to remove the back. Not disagreeing just short of actual explanation and demonstration.
No link to purchase the top?
www.ebay.com/itm/164682318981. Here is a relisted top from the same EBay lister. I apologize I either forgot or some of those get removed when they expire. Not sure but thank you for bringing it up.
@@BugmanVlogs hey thanks I just ordered the top and it was a good price. Thanks again
Amazon
Your washer looks like mine but the part does not match my model number. How do I see if it works with mine?
Maybe you have a better method, such as a mildewcide, which can easily remove mildew on the washing machine.
Not to be a grammar nazi but... should be “in” not “on”. There is no problem with mildew on the painted surfaces. That might work great for doing a tub and hose clean which would be “inside”. I will definitely try this as the hoses were slimy with mildew substance.
@@BugmanVlogs Sorry about the syntax error. If you want to try a mold remover gel, I would recommend one to you. Would you like to try it?
Yes what do you recommend?
@@BugmanVlogs sugelary mold remover gel
@Julie Erdman I was given a Samsung Washing machine 4 years ago & never thought to open the lid & notice the rust stains in the fabric softener area. I was gonna save the machine until I moved into a House but now that I see the rust stain & I want to sell it, will this Sugelary mold remover do the trick or is it worth even selling ?
How to not get rust on your clothes from LG rusted top: don't buy an LG washer. Ever again. Vote with your feet.
It’s not only LG, I’m having the same problem with a Samsung washer too.
Fast video failed to show how to replace the top cover
We also have the LG Waveforce. These are NOT CHEAP. It starting rusting around the same time as the one above, and as of yesterday I now have chunks of rust falling into my barrel with my clothes. This will be the LAST LG product I will purchase!! Fuming.
They don’t want to buikd quality so we will purchase sooner. Not like the old days.
@@BugmanVlogs Yes - exactly
Complicated cuz I can’t hear what u are doing and it’s too fast to see
Nah, I'ma just get one of those old refurbished whirlpool washing machines.
Sometimes I think that is the way to go. Older ones lasted longer and I don’t need all the flashing lights and LED screens, lol
@@BugmanVlogs Next time just get a Whirlpool or Maytag, made in the USA. Not this Korean junk.
I agree, all that fancy stuff makes it more mechanically inclined to breakdown.@@BugmanVlogs
Not sure what the purpose of this video is. "How To" video's actual walk yo through the "How To" steps.
Time lapse replacement is of no use. Need to actually go through just the steps needed to replace the top withi the bleach dispenser and reassembly.
Dude I’ll just buy a new washer
It’s a toss up, $120 and a couple hours of work or $1,000 for a new washer
Lol, after watching the video, I decided to go out and buy a different brand this time around.
Lol, we bought a Whirlpool, and we're quite happy with it. It seems as if though Samsung does not care to keep their customers.
You do a lot of talking, but when it comes to how to do the job. you speed up the video. Waste of 10 minutes
😂😂😂😂😂😂👊🏾
Can you marry me 😂
The part I wanted to see (how to remove the plastic bleach tray) he sped up all the way through. This video is worthless. Like watching paint dry.
Oh look a “Richard” in the comments. You could have just asked how to take it out. I can’t video every part on taking something apart. I do this for free and constructive criticism is good and I like to know what I need to do better. What I don’t need is a “Richard” making nasty comments because a free video didn’t meet his exact requirements. Have a great day.
Talk to much! Get to the bow to.