Amazon: Battery Adapters and converters: rex.red/power-tool-battery-adapter-converter * Adapters Parkside: rex.red/parkside20v-battery-adapter * 3D printer: rex.red/3d-printer * Screwdriver set: rex.red/precision-screwdriver-set * Faston terminals: rex.red/faston-kit * SUBSCRIBE and CLICK the BELL to be notified. DIY Projects rex.red/diro RedNumberONE rex.red/rno Join DIY Projects rex.red/diro-join Purchase using our affiliate links and we get a small amount. This helps us make more videos. You do not pay more and may benefit from special offers we share. Affiliate links are marked with a star. * By using our links, you support this channel.
Lidls are very good at honouring their 3 year warranty... I've bought lots of their powertools & in the one instance where I had a failure after 2 years, I was given a brand new tool & told I had 1 year left of my original purchase, seems fair to me.. !! 😎👍☘🍺
I got a Charger and 2 Batteries to replace the Batteries of an old Bosh NiCl Drill. I dont have alot of money but a 3D Printer, so I buy cheap used tools and just use the parkside Batteries and printed adapters to get around. Its a good compromise and I like the tinkering.
One important thing with the parkside batteries is that the built-in BMS only sends a signal to the tool when it reaches its lowvoltage cut-off and does not contain a MOSFET to turn of the power. So when its used with an adaptor like this and with a tool where the BMS in the battery normally cuts the power to the tool, the low voltage cut-off won't work and there is a big risk of damaging your battery by discharging it to low.
I have an ebike that runs on 42V charged. If you series connect 2 of these you get 42V fully charged 10S pack. I use 4*4AH parkside batteries with 40 18650 in total
It should work in parallel and series combined. If they are 2 in paralel + 2 in series it's 40V 8ah for the bigger ones. These have 5 18650s and the 4ah version has 10 INR 18650. All 2000mah per cell. Pretty good deal if you need 18650 batteries or using these as they are!
@@IONHowTo I love your channel! Yeah exactly I 3D printed 2 brackets and use them to ride 60+km on my shady product Imortor 1.9 with a massive battery extension and some small internal ebike motor mods to keep the water out
Hi, Could you please help me with a similar setup? I'm just learning atm and building my own electric folding bike. I've bought 6x 4ah parkside batteries. The plan is to wire them so it's 6P10S which should equate to 36v12ah (60 18650 cells in total). How do i go about buying the wires and connectors? Thank you.
One quick question: where can I find an adapter to use Parkside Performance battery with normal Xteam tools? I understand that I can file 2mm from the battery, but I would like an adapter better to use with both Xteam tools and Performance tools.
Links to the original STL files are in the description. Not sure if I did modify them or not. If I don't say that I've modified them (in the video) take them from the links in description.
@@IONHowTo I actually found them just after I asked you, thanks a million. Wasn’t expecting a response to a video that was this old.. thanks very much.. will probably spend the evening looking at more of your vids🤣 thanks you.
Amazon: Battery Adapters and converters: rex.red/power-tool-battery-adapter-converter *
Adapters Parkside: rex.red/parkside20v-battery-adapter *
3D printer: rex.red/3d-printer *
Screwdriver set: rex.red/precision-screwdriver-set *
Faston terminals: rex.red/faston-kit *
SUBSCRIBE and CLICK the BELL to be notified.
DIY Projects rex.red/diro
RedNumberONE rex.red/rno
Join DIY Projects rex.red/diro-join
Purchase using our affiliate links and we get a small amount. This helps us make more videos. You do not pay more and may benefit from special offers we share.
Affiliate links are marked with a star. *
By using our links, you support this channel.
More videos about Parkside batteries pretty please!
Lidls are very good at honouring their 3 year warranty... I've bought lots of their powertools & in the one instance where I had a failure after 2 years, I was given a brand new tool & told I had 1 year left of my original purchase, seems fair to me.. !! 😎👍☘🍺
I got a Charger and 2 Batteries to replace the Batteries of an old Bosh NiCl Drill. I dont have alot of money but a 3D Printer, so I buy cheap used tools and just use the parkside Batteries and printed adapters to get around. Its a good compromise and I like the tinkering.
One important thing with the parkside batteries is that the built-in BMS only sends a signal to the tool when it reaches its lowvoltage cut-off and does not contain a MOSFET to turn of the power.
So when its used with an adaptor like this and with a tool where the BMS in the battery normally cuts the power to the tool, the low voltage cut-off won't work and there is a big risk of damaging your battery by discharging it to low.
Which one for makita to parkside please ? Thanks
I have an ebike that runs on 42V charged. If you series connect 2 of these you get 42V fully charged 10S pack. I use 4*4AH parkside batteries with 40 18650 in total
It should work in parallel and series combined.
If they are 2 in paralel + 2 in series it's 40V 8ah for the bigger ones.
These have 5 18650s and the 4ah version has 10 INR 18650. All 2000mah per cell.
Pretty good deal if you need 18650 batteries or using these as they are!
@@IONHowTo I love your channel! Yeah exactly I 3D printed 2 brackets and use them to ride 60+km on my shady product Imortor 1.9 with a massive battery extension and some small internal ebike motor mods to keep the water out
Hi, Could you please help me with a similar setup? I'm just learning atm and building my own electric folding bike. I've bought 6x 4ah parkside batteries. The plan is to wire them so it's 6P10S which should equate to 36v12ah (60 18650 cells in total). How do i go about buying the wires and connectors? Thank you.
One quick question: where can I find an adapter to use Parkside Performance battery with normal Xteam tools? I understand that I can file 2mm from the battery, but I would like an adapter better to use with both Xteam tools and Performance tools.
I'm not sure about the adapter you need but try on Ebay or maybe theres a 3d print model stl or something.
@@IONHowTo thanks for the reply. Didn't find much. Do you know how to make a 3d model for an adapter?
@@cribsone try to find a ready-made one. It's not easy to make the model.
Did you have any luck finding an adaptor? I'm looking for one myself
@@turloughoconnor1842 I found one, it's made from 2 pieces connected with 2 wires.
Thanks for your vidéo ! Do you know where to find connectors strip/tabs male and femal parkside type ? Thanks
That same type, I'm not sure. Faston connctors work wel on it especially the longer ones.
I cant find parkside adapter for black and decker, help!
You could look if someone made a 3d-printer model already and find someone near-by with a 3d printer to make it for you.
Unrelated, but I love your accent comrade.
Do you have the STL files for the adapters??
Links to the original STL files are in the description.
Not sure if I did modify them or not. If I don't say that I've modified them (in the video) take them from the links in description.
@@IONHowTo I actually found them just after I asked you, thanks a million. Wasn’t expecting a response to a video that was this old.. thanks very much.. will probably spend the evening looking at more of your vids🤣 thanks you.
@@sludds2 Thanks for watching!
Thanks
Buenas donde puedo adquirirlo gracias
Hi, can you help me with some information on where to buy parkside battery adapter? România
Ebay, olx or you use the thingverse models to print them yourself or ask someone with a 3d printer.
@@IONHowTo thanks!!
Hello from Greece
I have parkside tools
What adapter must buy to work ingco tools?
You have parkside tools or batteries?
@@IONHowTo parkside tools have
With batteries parkside
Could find a ready-made adapter or 3d model to print but I'm not sure if there are any.
Good video. but the background music is way to loud ..Cheers
Thanks for watching and for feedback. We don't use music these days at all.
@@IONHowTo Thankyou,
De unde se pot cumpara replicile astea de conector ca am o tarna de bormasini fara baterii 😂
Nu sunt sigur, magazine cu piese pt electricieni poate. Faston connector.