In the 1930s, a German industrialist persuaded the local government that if a flywheel was spun up, then a brake was applied, more energy could be extracted then went in. They agreed to fund an experiment. A pit was dug for the flywheel, it was spun up and the brake applied. The flywheel said "fck this" climbed out of the pit, crashed through the wall, travelled 2km, killing a cow and embedded itself in a house.
You guys need to remake all your most successful wheels then team up with the slo mo guys and do a collab video and get some accurate rpm's on these things!
Betterhelp - "Just ignore the multiple class action lawsuits and sign up today" Also, good news: cybertruck plating reduced to 1.8mm at the thickest panels so your jeel will go through cybertruck no prob. 👍
cant you guys get a tachometer taped to the edge and constantly read the rpm?would be really interesting to see how fast your head will be gone without protection
did anyone notice the sparks on the red wheel when the denim wheel was spinning? its like it was building statice electricity or something and had a lot of great sparks jump around the outside edge of the red wheel!
@@bentleyrowland1 is it? they show the wheel before and i cant see anything in it, and the light is on the exterior of the wheel and is very bright and a clear white for a lightup wheel.
What if you cut the carbon fiber into strips, coated them in resin, then wound them around a core? The tensile strength of the fibers going around the circumference should help it withstand the centrifugal forces better. You could do two, one with the fibers going along the length of the strips and one with the strips cut diagonal to the fibers.
Better help records, and then sells the info from your conversations with their therapists to 3rd party advertisers. I am pretty sure they have lost at least 3 lawsuits over this issue in the past several years or so. I reccomend not advertising with them due to this.
I think it would be a good idea to make a strong shield for the nozzle, to prevent that probably pretty expensive nozzle from breaking... just a thought
*W. T. **_absolute_** F.* is happening at 6:35 and 10:56 around the perimeter of the OTHER WHEEL....... 😳 _(I recommend watching at half, or quarter, playback speed)_ I had thought skateboard trucks didn't have live axels, but I guess that's wrong (since the other wheel falls off later lol) _But yea,_ there's clearly *something* going on with that other wheel, which based on the color (blue), appears to be... electrical arcs??? 🤨 Was there such a high build up of static electricity, that it was discharging from the other wheel? _(with that wheel's material acting as a dielectric?)_ And it's not a weird effect displaying in just that camera, as the GoPro footage @9:28 *also* shows it! (albeit, less clearly due to the distance) I don't know if this works how it does on Twitter but if it does... @SteveMould you have any thoughts? 😊
Unfortunately, that was an epoxy wheel reinforced with denim. You Would need to use a press, plus a vacuum chamber, and a lot less epoxy if you want to make a denim wheel.
Most high-paying UA-cam sponsors are questionable. It hurts my soul every time I see Battleship NJ advertise art or noble titles or mobile phone games, but at least the sponsor money is going to a good place.
It's not horrible and it's not hurting people, they have some therapists on there who's credentials are 100%. But still a lot of times people who need someone to talk to don't need a perfect person. They just need someone and that's what better help is doing.
They are objectively terrible. I’m pretty sure they’re still in a lawsuit right now for selling user data to advertisers, which is always illegal, but far worse when it’s a service legally required to be as secretive with patient information as possible. They also got in hot water for having little quality control with who was allowed to work as a therapist on the site, with some qualified people and some wholly unqualified people hoping to make a quick buck.
Another idea you could try, when making the denim wheel, use a slow drying resin and when all the layers are stacked up, clamp it down real tight with a hydraulic press until set in place. Would it offer a better bond? Or would it squeeze out so much resin that there wouldn't be enough to hold so tight? Maybe try the same with carbon fibre?
You guys need to have the jet further away from the weels. And you have to program it so the arm moves the jet further away from the weels in the same speed as the wheels expand. 😁
11:50 Does anyone else think that maybe that little drop of water hitting the wheel could have caused it to break? Like it slightly upset the balance of it and at that speed it was enough to break it? Something like that?
Make yourselves a heavier blast shield that even covers the ends with only a camera port and a port for an RPM sensor. In the explosives world, "the tighter you contain an explosion, the larger will be the yield." (Which you are doing by better and better wheels and ever faster RPM's)
I see the thumbnail and title change. It was originally featuring the carbon fiber wheel and asks something like: can we get a carbon fiber wheel to have the fastest revolutions?
I think you might get a little more time before destruction if you wrap the wheel with a couple layers of kevlar, which has much higher abrasion resistance than carbon fiber.
I wonder if it would improve the strength of the resin if you put it in a vacuum chamber to pull any air bubbles out. Please bring in the Slowmo Guys with their high speed cameras, you'll be able to learn so much more about the failure points :)
You should def get The Slow-Mo Guys involved! Maybe 6they'll lend you the "really capable" camera. The last clip *they* did was two shape charges (explosives) going off, facing each other. What was the speed, like 800.000 FPS? Maybe that'll show a bit more detail with your "reinforced" resin wheels!
nice heat shield coat, the less you know, 3d woven carbon fiber with non-cut fibers. yep sewing machine around and around the wheel. making new layers.
How about passive magnetic bearings? Air bearings won't work, because your axial load is too high... but I'm certain magnetic bearings would see a significant improvement.
If an object was spinning with an angular velocity of roughly ludicrous speed, the spacetime distortion around the object would be extreme enough to allow reverse time travel. I hope someday we can build a time machine with just a wheel and a waterjet.
They are. The stole personal information to sell to third party advertisers, and didn’t have an adequate quality control process, as many unqualified people where allowed to be “therapists” on the site. Apparently, they’re also expensive
Dude you guys need a barrier, you are so lucky that Jean wheel did not hit you! Please put something up fellas, I don't want to see an "update" video on one of ya'll
In the 1930s, a German industrialist persuaded the local government that if a flywheel was spun up, then a brake was applied, more energy could be extracted then went in. They agreed to fund an experiment. A pit was dug for the flywheel, it was spun up and the brake applied. The flywheel said "fck this" climbed out of the pit, crashed through the wall, travelled 2km, killing a cow and embedded itself in a house.
a true story ? if it is fuck me 2km is a long way lol
@@spoon-plays spinny things are scarily good at storing energy. scarily good. it's why they're used as batteries in huge powerplants.
Sounds like the researcher made a round off error.
@@spoon-plays I understand that it was a 3 meter wheel.
@@sbkenn1 that makes it even more scary lol a big wheel flying that distance oooof
Time to bring n the slomoguys
I came to the comments to say it
Bring in gav and Dan!
Yup
fr fr we need this collab
Yesss!
better help is a predatory service, charging exorbitant prices for minimal contact
all yt ads are scams. But people are too retarded to even figure out how to tie their shoelaces, so..
You guys need to remake all your most successful wheels then team up with the slo mo guys and do a collab video and get some accurate rpm's on these things!
I was thinking that too, but they need more safety for sure
please don't use better help, they treat their therapists like shit, and they're currently battling the FCC on selling users data.
Betterhelp - "Just ignore the multiple class action lawsuits and sign up today"
Also, good news: cybertruck plating reduced to 1.8mm at the thickest panels so your jeel will go through cybertruck no prob. 👍
👍🏼
cant you guys get a tachometer taped to the edge and constantly read the rpm?would be really interesting to see how fast your head will be gone without protection
awesome comment
They've tried that in the past, couldn't get an accurate reading iirc
really doesn't work well when the wheel is constantly surrounded by fog
We need a control sample. How would a pure resin wheel perform?
I'll never forget: *Jerkles*
did anyone notice the sparks on the red wheel when the denim wheel was spinning? its like it was building statice electricity or something and had a lot of great sparks jump around the outside edge of the red wheel!
A good catch at the 6:37 mark
@@rogerstlaurent8704 its even more noticeable during the carbon wheel at 10:57
i thought it was the laser from the tachometer, i might be wrong tho
It is a light up wheel
@@bentleyrowland1 is it? they show the wheel before and i cant see anything in it, and the light is on the exterior of the wheel and is very bright and a clear white for a lightup wheel.
The 'Will we die!' In unison tickled my soul.
What if you cut the carbon fiber into strips, coated them in resin, then wound them around a core? The tensile strength of the fibers going around the circumference should help it withstand the centrifugal forces better.
You could do two, one with the fibers going along the length of the strips and one with the strips cut diagonal to the fibers.
Also compress the puck. Going to need a mold.
Unidirectional roving, wound into a mold or bobbin.
Better help records, and then sells the info from your conversations with their therapists to 3rd party advertisers. I am pretty sure they have lost at least 3 lawsuits over this issue in the past several years or so. I reccomend not advertising with them due to this.
I think it would be a good idea to make a strong shield for the nozzle, to prevent that probably pretty expensive nozzle from breaking... just a thought
6:36 check the electric sparks on the orange wheel behind! presumably a static build up of some sort?
the carbon fiber sounded like a air raid siren
Maximum pucker factor
and they're like pucks. So double pucker factor.
I think leaving the rubber bushing on the trucks created that wobble. Next time fabricate a solid mount for the wheel
*W. T. **_absolute_** F.* is happening at 6:35 and 10:56 around the perimeter of the OTHER WHEEL....... 😳 _(I recommend watching at half, or quarter, playback speed)_
I had thought skateboard trucks didn't have live axels, but I guess that's wrong (since the other wheel falls off later lol)
_But yea,_ there's clearly *something* going on with that other wheel, which based on the color (blue), appears to be... electrical arcs??? 🤨
Was there such a high build up of static electricity, that it was discharging from the other wheel? _(with that wheel's material acting as a dielectric?)_
And it's not a weird effect displaying in just that camera, as the GoPro footage @9:28 *also* shows it! (albeit, less clearly due to the distance)
I don't know if this works how it does on Twitter but if it does... @SteveMould you have any thoughts? 😊
Spønsør starts at 4:36 and ends at 6:17
Put that in SponsorBlock
Chad
Betterhelp is a sham
Honestly, it’s absolutely amazing that you guys have all your eyes, fingers and other extremities!!! 😂
You guys need to build a beyblade launcher powered by the water jet and some gearing and set the world record for the fastest beyblade
Looks like on the last one the noise was the bearings coming loose where the wheel wouldn't allow them out, the heat probably exploded it lol
Now all I can think is whether or not jeans can cut wood
Unfortunately, that was an epoxy wheel reinforced with denim. You
Would need to use a press, plus a vacuum chamber, and a lot less epoxy if you want to make a denim wheel.
Better help is crazy EXPENSIVE!!!! Over $300 per month
Put bearings in bearings in bearings and see how it'll spin
noway i see you sponsoring a therapy company after i got sad and thought about some thing😂
Everyone’s pay respect to Jean wheel
🙏
🙏
6:19 🙏🙏🙏🙏🙏
The skateboard trucks aren’t stiff enough :/
Hasn't BetterHelp been exposed for being terrible numerous times now?
Most high-paying UA-cam sponsors are questionable. It hurts my soul every time I see Battleship NJ advertise art or noble titles or mobile phone games, but at least the sponsor money is going to a good place.
It's not horrible and it's not hurting people, they have some therapists on there who's credentials are 100%. But still a lot of times people who need someone to talk to don't need a perfect person. They just need someone and that's what better help is doing.
I've used BetterHelp and liked their evening appointments. My counselor was good!
They are objectively terrible. I’m pretty sure they’re still in a lawsuit right now for selling user data to advertisers, which is always illegal, but far worse when it’s a service legally required to be as secretive with patient information as possible. They also got in hot water for having little quality control with who was allowed to work as a therapist on the site, with some qualified people and some wholly unqualified people hoping to make a quick buck.
you need to colab with the slow-mo guys
Another idea you could try, when making the denim wheel, use a slow drying resin and when all the layers are stacked up, clamp it down real tight with a hydraulic press until set in place. Would it offer a better bond? Or would it squeeze out so much resin that there wouldn't be enough to hold so tight? Maybe try the same with carbon fibre?
You guys need to have the jet further away from the weels. And you have to program it so the arm moves the jet further away from the weels in the same speed as the wheels expand. 😁
Then, the jet won't cut the wheels before they explode.
11:50 Does anyone else think that maybe that little drop of water hitting the wheel could have caused it to break? Like it slightly upset the balance of it and at that speed it was enough to break it? Something like that?
that jeal was VIOLENT
Make yourselves a heavier blast shield that even covers the ends with only a camera port and a port for an RPM sensor. In the explosives world, "the tighter you contain an explosion, the larger will be the yield." (Which you are doing by better and better wheels and ever faster RPM's)
Years later and im still seeing clips of the first video getting spread on the internet.
I legit want to make my own board and wheels.. lol as a 31 year old I miss skating lol
Glad to see you coat all the layers in epoxy. Too many people will put all the layers in at once and they always separate.
You made tungston man wow
I see the thumbnail and title change. It was originally featuring the carbon fiber wheel and asks something like: can we get a carbon fiber wheel to have the fastest revolutions?
Waterjets literaly prove that water can be just as deadly as fire if not more.
Best sponsor placement ever!
Does anyone else thinks he looks like smallant or vice versa? even sounds like him a bit. Great content either way really enjoying this channel.
Wheelie Jean turned out nicely! xD
I believe you need to layer a carbon fiber and the denim... And maybe some Kevlar...
That first wheel just said "nope".
That one chunk of wheel broke quantum calculations 😂
R.I.P. Gene Wiel. He was so young.
You guys need to call in The Slow Mo Guys!
waiting for the tungsten wheel
0:37 kitchen nightmare sfx
😂
use a hydraulic press to create a dense wheel of solid carbon fiber
Seems like this kind of thing could also serve as R&D for RC car wheels/tires, because that's the current limiting factor on their speed runs.
6.36... At the inner whell... Was a portal opening? A wormhole forming? 😮
You mad scientists now 😬
imagine getting killed by a jheel
Does anyone think it sounds like a tornado siren? 10:58
A collab with the slowmoguys would be awesome man!
I think the Slowmo Guys need to give you a visit.
Do a colab with the Slow Mo Guys and film it with a million frames!
You guys should do a collab with the Slow Mo Guys
I think you might get a little more time before destruction if you wrap the wheel with a couple layers of kevlar, which has much higher abrasion resistance than carbon fiber.
8:57 Bro is apart of the elite
I wonder if it would improve the strength of the resin if you put it in a vacuum chamber to pull any air bubbles out. Please bring in the Slowmo Guys with their high speed cameras, you'll be able to learn so much more about the failure points :)
1:56 Ah, you put yourself in great peril there
1:10 what a nice couple🥰
You should def get The Slow-Mo Guys involved! Maybe 6they'll lend you the "really capable" camera. The last clip *they* did was two shape charges (explosives) going off, facing each other. What was the speed, like 800.000 FPS? Maybe that'll show a bit more detail with your "reinforced" resin wheels!
wheel spun so fast it went paid.
I can confirm the wheel do be spinnin.
Check the underside of the water jet accordion arm thing. I think a piece went into it.
0:37 THE GREAT ESCAPEEEEEE
What was that purple light at 6:34 ?
nice heat shield coat, the less you know, 3d woven carbon fiber with non-cut fibers. yep sewing machine around and around the wheel. making new layers.
How about passive magnetic bearings? Air bearings won't work, because your axial load is too high... but I'm certain magnetic bearings would see a significant improvement.
Please collab with slowmo guys!
What about getting a big roller bearing and try just that, if it cuts it try putting titanium on the outside and press fit it.
The stronger the material bond of the wheels, the more violent the explosion will be when it loses its material integrity.
The power of the jeel
If an object was spinning with an angular velocity of roughly ludicrous speed, the spacetime distortion around the object would be extreme enough to allow reverse time travel. I hope someday we can build a time machine with just a wheel and a waterjet.
Awesome work gents.
I thought better help was a scam
They are. The stole personal information to sell to third party advertisers, and didn’t have an adequate quality control process, as many unqualified people where allowed to be “therapists” on the site. Apparently, they’re also expensive
First one was like it was playing prop hunt and was found
When the resin has hardened post cure it at 60degrees C for 10-12 hours it will be harder and should be less brittle.
I just thought of something!!!! Blue jean saw blade would be soooo cool to see them try that 😂😂😂
P.s. I love you guys I've watched this channel since I was 18 and I'm still here at 24.
I got a water jet add on the water jet channel
Dude you guys need a barrier, you are so lucky that Jean wheel did not hit you! Please put something up fellas, I don't want to see an "update" video on one of ya'll
the first one became a 2003 cyberdonut
I never knew spinning could be so explosive
Well, it is a good trick after all...
@@camillosteuss 😄😄
Been waiting for some cool stuff!!!
So much force, obscene!
Gotta love the office reference 😂
Truly was a win win win
Can someone explain to me why Sisyphus keeps showing up the content I watch lately?
youtube uses a braindead algorithm to recommend things to people.. Also, they get paid big bucks to censor channels or push up channels..
slow mo guys collab when
Why did the rear wheel turn into a sparkler for a second?
I love this channel so much
Did anyone else notice the sparkly lights around the red wheel - is that the same phenomenon as helicopter rotor sparkles?
Use a clamp to press your jeans wheel while it sets. That wheel was a mess before you spun it.
The Jean wheel was not layered properly. You layered it the wrong way. Can’t believe you didn’t realize that.
2:22 He just wanna go away from this Wheel-spinning hell!!