Great job done on a very useful & probably much used accessory to your all terrain utility vehicle. That’s built impressively sturdy & looks like it could handle jobs that might appear to be too much for it. As long as it’s equipped with the right wheels to be able to handle heavier loads, I can’t see it not being able to do any job you need it to do. Obviously your kids love it & being involved in the use of it for your outdoor projects. I love the fact that it can dump loads of dirt, sand, large rock, gravel, broken concrete/ asphalt, trash, tree/ bushes/ brush trimmings, firewood, etc. I think you’ve probably given some/ many DIYers ideas that will help them get their own projects done with more efficiency. GREAT JOB!!!!!!!!!!!!
Excellent craftsmanship from the frame to the finishing touches a big ..👍 added to the thousands already received. Looks like the kids also enjoyed it. Stay well, Joe Z
Greetings from Australia folks, I’ve been subscribed to and following your channel for quite a while now. Great content and some simple yet brilliant ideas and solutions .. Thank you. I believe the guiding narrative featuring your wife’s lovely clear voice (and beautiful accent) is a great idea.
Move the axles back, closer to the rear of the bed, and it will allow the bed to raise higher and probably dump everything out. Pretty rugged build for a yard cart. The video is spot on just like it is, very easy to follow, allows for a smooth work flow without having to stop and explain.
Thank you for the courtesy of asking what the viewers prefer. Your voice-over narrations are fine :) and please continue to not use any stupid music. Its nice that you're letting us hear the actual sounds of the machinery, tools, processes, etc.
I have watched many of your videos and have enjoy all of them. Your wife's narrative is a nice touch. It lets us know what your thoughts were during the construction. Thank You!
I applaud the effort and the execution. The wheel bearing hubs are not necessary idler wheels connected to an axle doesn't matter if axle is rigid or not load is all on bearings inside wheel center. They only make your cart weigh more you could have simply drilled some holes in wheel fab"d some spacers and bolted them to hubs just like their engineered and designed to perform this would put load capacity so far from where the trailer would fail. Fill the box with some cut logs flush with the sides and hit bumb if the axle hasn't already started to bend it going to and rivets do not have necessary clamping force to safely haul much weight. Hint consider carriage fasteners their designed to bolt down thru wood as you have chosen. I have been there done that just sharing so you can modify or improve because I like the level of skill you have I giving you a like and subscribe. Also the audio and video aspect is pro-level. Whomever and however this arrives on YT keep it up!
I love your wife's voice over and I praise her efforts in learning to speak English. Your video was most entertaining and my only suggestion for your trailer would be to add a gas strut to help tip it when it is full. Please retain the voice over as it is so much nicer than just subtitles with random music. The format and content are just perfect.
I’ve just recently found your channel and enjoyed the videos I’ve seen so far. Having the voice over is both entertaining and informative, keep up the great work both of you. I’m definitely in favor of continuing the explanations in English to understand your thought processes. I look forward to seeing more of your projects!
I really don't require any voice over but you are helping your wife and I am glad to help her in her task. I think your design could use another helper compression cylinder to help you 'release' the load. But overall, your project is a fun watch for me.
The trailer design looks quite sound, and it appears your construction is excellent. In my opinion, you should continue to incorporate your wife’s narration. And please tell her she is doing an excellent job and her English skills are very good!
That's a nice design, well done. Only suggestion I have is that lever for tipping the bed has a couple joints in it that may give trouble if there's ever a lot of force put on that lever. If so I'd consider welding on a couple triangular flats to re-enforce those angles a bit. :)
Neat. An upgrade I would suggest is to make the box out of sheet metal and weld it. You could perhaps coat it with some sealant and use a rubber ring around the gate to allow you to transport liquids as well as solids. Another thought is to add a hydraulic arm to the lifting mechanism so that you can more easily lift heavier loads.
Hi, your wife has good English! I don’t mind voice over or not so helping your wife seems favourable to enhance her English. Your creativity and fabrication skills are A1 not to mention video editing skills as well! I enjoy watching and look forward to future projects. Thanks for sharing. 👍
I think your videos are good without narration. I see others like the narration but in my opinion you do a great job of explaining what you're doing without words so narration is not necessary.
I saved myself $4,750 and bought a cart from Tractor Supply for $140. Pull it behind a deckless riding mower and carry firewood and dirt. - North Central Florida - 6.10.2024
@@JoeTurmoil Maybe Mother Russia does not have a Tractor Supply. Nope, you're not the only. It was manufactured content for clicks. Interesting, but yes, over engineered.
I personally enjoy the videos without voice over. The sounds are part of what makes the videos so enjoyable to watch. Voice not needed in your content.
glad i subscribed to your channel, always left wondering where i could come up with the hubs? awesome work, you have a very fabricating type of mind, think outside the box, not afraid to show mistakes!
It is cute. I prefer with narration. I would also like to have an idea what you are making before wasting time watching something I might have no interest in.
If you had moved the box of the trailer a little farther forward you would have more weight on the pulling vehicle for traction and the deck at the rear when dumping would have been higher, meaning more load would slide out before pulling forward. The trick is to balance the weight so you don't overload the pulling vehicle.
I've been thinking about it. But in this case, my manual unloading system based on a lever will most likely no longer work, since it is necessary to make a much greater effort to unload
Yeah true but then you would not feel like a real man and build something with your hands like men do. !!!!!! He put a lot of time and effort into building this and was proud of working with his hands and not just another lazy rich entitled smart ass !!!!!
You're obviously a skilled man & I only wish I knew how to do some of that metalwork & welding...... you really made quite a nice piece. I'd have preferred to hear your voice thru this process(s) along w/ what you were thinking as you dealt w/ the many things that pop up. The oriental woman(AI) was the weakest part of this video.... I think most folks would like to hear what you thought as you did each step ; your thoughts, concerns, and why you did the things you did.... Yep, I'd liked to have heard you speak. It's warmer & more personable that way & people can relate much better knowing someone's home on the other side. peace
You have a lot of safety concerns to address, especially with the kids. It's great to have them involved, but when the little one jumped up there on the driver seat while the vehicle was running, could get you into a huge amount of trouble. Please be careful.
👍👍👍👍👍🫵🪨 I wouldn’t add anything it looks great. You did a really good job and I like it that somebody does the voiceover for you. I don’t like it when someone builds something and I don’t explain anything at all.
would have used 4-wheeler tires and bearings instead of the other tires and would have made longer handle for dump and made box out of metal or aluminum....
only thing i saw was if you used wood for the flooring then the yellow bar that tilts it up needs a metal plate just by leaving it outside for a year would make the flooring soft enough to start giving you problems with the yellow bar going through the floor of the trailer other than that i see nothing wrong but i've always been that person that my equipment has to last me 10 years so say i bought a trailer it have to last a good ten years and make me money before i say it a good product i took a old mobile home frame and made a equipment hauler for my dad but ive also took a 22 foot box truck and made it a mobile home truck by time i was done the truck was 19 feet long total instead of about 26 feet long with the box truck on it so i sold the box off the back to design the bed of the truck i short the farm of the truck and had that truck for over 10 years hauling mobile homes i did this when i was alot younger so i did have a welder friend of the family and own his own welding business i was learning from him how to weld so back in the 80's i made a nice grated floor bed for the truck and designed the side to come of for easy loading and unloading of martials we finally retired the business in 2010 we started when i was 5 years old of the business first truck we had was a old chevy truck it lasted about 2 years then we bought a old international loadstar lasted 5 years then we built this one over the last two years of the international life so we got a good 15 years out of that truck the last 5 years she showed he age abit
First, your wife's English is excellent. Not an easy language to learn and she did wonderfully well. Second, once I got used to it, it was okay but I usually prefer unnarrated videos with captions.
Really? Do you also hate having to watch a movie all the way through to know how it ends? UA-cam is for entertainment purposes. Showing you the ending at the beginning defeats the purpose. Also, you have the ability to skip forward it's really easy. There are videos on UA-cam that explain how to do it. Fair warning you have to watch the entire video unless you already know the first steps in which case why are you watching the video?
While I always respect re-using left over materials crafting the pivots seems like a lot of wasted time and effort. Using two pillow block bearings and a pass-through axle would have been much easier and can be done with no welding, (if you were to consider many people might like to do this and don't own a welder). In fact if you included risers the pivot could be done at the wheels axle. Even so, I did upvote this video.
Hi friends, how many points do you rate my work and product?
Also, the question is do you like the video format with voice acting?
frankly?
no :(
but i'm not a fan of voiceover anyway, so don't take the no too hard ;)
Not a fan of the voice over. It has an accent or something that made it a bit difficult to understand.
I enjoyed your wife’s voice over. And I rate your work 9 out of 10 👍
You video presentation was just fine, FWITW, I think a voice over is better than music, that's my preference, you do what you like and suits you.
Voice over is good
Great job done on a very useful & probably much used accessory to your all terrain utility vehicle. That’s built impressively sturdy & looks like it could handle jobs that might appear to be too much for it. As long as it’s equipped with the right wheels to be able to handle heavier loads, I can’t see it not being able to do any job you need it to do. Obviously your kids love it & being involved in the use of it for your outdoor projects. I love the fact that it can dump loads of dirt, sand, large rock, gravel, broken concrete/ asphalt, trash, tree/ bushes/ brush trimmings, firewood, etc. I think you’ve probably given some/ many DIYers ideas that will help them get their own projects done with more efficiency. GREAT JOB!!!!!!!!!!!!
I like that! Very clever. Good to see the kids helping the old man.
Thanks for the narration, you did an excellent job. You english was clear and well pronounced!
Love your videos and your wife's narration only adds to how wonderful your videos are. Keep it up.
Attention to detail is fantastic. Nice build, great looking. Love the tilt mechanism.
Excellent craftsmanship from the frame to the finishing touches a big ..👍 added to the thousands already received. Looks like the kids also enjoyed it.
Stay well, Joe Z
Ich gratuliere Dir für so gute Idee, wirklich einfach und ausgezeichnet. Hut ab...
Great idea ,your wife voice is so soothing and very good English
Nice job sir!!!!!! Men using their hands to good use !!!!!!
9:51 because you're using plywood, I would have caulked the joints of the metal to seal out moisture. 💖🌞🌵😷
Love voice over. Came out great. Great for yard work. 👍😎
Thank you for your high appreciation!
Voice over perfect! Good project, workmanship and presentation.
Greetings from Australia folks, I’ve been subscribed to and following your channel for quite a while now. Great content and some simple yet brilliant ideas and solutions .. Thank you.
I believe the guiding narrative featuring your wife’s lovely clear voice (and beautiful accent) is a great idea.
I love your imagination, more power to you.
Looks great. Even the voice in this video is helpful.
True craftsmanship, excellent work!
Great idea. Enjoyed having narration
Move the axles back, closer to the rear of the bed, and it will allow the bed to raise higher and probably dump everything out. Pretty rugged build for a yard cart. The video is spot on just like it is, very easy to follow, allows for a smooth work flow without having to stop and explain.
Thank you for the courtesy of asking what the viewers prefer. Your voice-over narrations are fine :) and please continue to not use any stupid music. Its nice that you're letting us hear the actual sounds of the machinery, tools, processes, etc.
I have watched many of your videos and have enjoy all of them. Your wife's narrative is a nice touch. It lets us know what your thoughts were during the construction. Thank You!
I applaud the effort and the execution. The wheel bearing hubs are not necessary idler wheels connected to an axle doesn't matter if axle is rigid or not load is all on bearings inside wheel center. They only make your cart weigh more you could have simply drilled some holes in wheel fab"d some spacers and bolted them to hubs just like their engineered and designed to perform this would put load capacity so far from where the trailer would fail. Fill the box with some cut logs flush with the sides and hit bumb if the axle hasn't already started to bend it going to and rivets do not have necessary clamping force to safely haul much weight. Hint consider carriage fasteners their designed to bolt down thru wood as you have chosen. I have been there done that just sharing so you can modify or improve because I like the level of skill you have I giving you a like and subscribe. Also the audio and video aspect is pro-level. Whomever and however this arrives on YT keep it up!
I love your wife's voice over and I praise her efforts in learning to speak English. Your video was most entertaining and my only suggestion for your trailer would be to add a gas strut to help tip it when it is full. Please retain the voice over as it is so much nicer than just subtitles with random music. The format and content are just perfect.
Nice work, kids are cute!
I’ve just recently found your channel and enjoyed the videos I’ve seen so far. Having the voice over is both entertaining and informative, keep up the great work both of you. I’m definitely in favor of continuing the explanations in English to understand your thought processes. I look forward to seeing more of your projects!
Now that was a dam good video and a very clever way of using old hubs as a tipping axis... 👍🤙👌
A well thought out design put together beautifully
Very clever. 👍
Your wife's voice is nice but I prefer the quiet where I focus on what you are doing. Neat project, as usual!
There's always the mute button so others can still hear the narration if they want.
Awesome design. I would add a steel plate where the lifting rollers contact the plywood.
Awesome work, Vanya! Really well done! 😃
Stay safe there with your family! 🖖😊
Hi! I liked the design of the hubs, it turned out to be powerful!
That's nice! Simple and effective!
I really don't require any voice over but you are helping your wife and I am glad to help her in her task. I think your design could use another helper compression cylinder to help you 'release' the load. But overall, your project is a fun watch for me.
Well done and well made !
Very nice job, I like it
Being able to explain in multiple languages is very important to your channel. You could also use A.I. to voice over. Great work keep inventing
Awesome cheers !
The trailer design looks quite sound, and it appears your construction is excellent.
In my opinion, you should continue to incorporate your wife’s narration. And please tell her she is doing an excellent job and her English skills are very good!
Thank you your feedback is very important! I also thank you for the high appreciation of my work!
Smart young man………..😊
10:25 you need a place on the trailer to store that block that holds up the hitch. 💖🌞🌵😷
That's a nice design, well done. Only suggestion I have is that lever for tipping the bed has a couple joints in it that may give trouble if there's ever a lot of force put on that lever. If so I'd consider welding on a couple triangular flats to re-enforce those angles a bit. :)
You are a metalworking genius although your wheel selection process could still use refinement. I like it. I am impressed.
Very good engineering 👍
Neat. An upgrade I would suggest is to make the box out of sheet metal and weld it. You could perhaps coat it with some sealant and use a rubber ring around the gate to allow you to transport liquids as well as solids. Another thought is to add a hydraulic arm to the lifting mechanism so that you can more easily lift heavier loads.
Hello, sir. You did a great job, I really liked your project and the way you did it! Car hubs power💪
I really like riveting things together
I really like it..
Hi, your wife has good English! I don’t mind voice over or not so helping your wife seems favourable to enhance her English. Your creativity and fabrication skills are A1 not to mention video editing skills as well! I enjoy watching and look forward to future projects. Thanks for sharing. 👍
Thank you for your support and such a high appreciation of my work!
liar
❤Nice🎉👍👍👍
Hi, good job. For me I prefer no voice and no music, not because the voice is bad but because it kill the ASMR effect I like.
I think your videos are good without narration. I see others like the narration but in my opinion you do a great job of explaining what you're doing without words so narration is not necessary.
Nice work
Very cool
I saved myself $4,750 and bought a cart from Tractor Supply for $140.
Pull it behind a deckless riding mower and carry firewood and dirt.
- North Central Florida
- 6.10.2024
Seriously. I'm not the only one who thought this was majorly over engineered?
@@JoeTurmoil Maybe Mother Russia does not have a Tractor Supply.
Nope, you're not the only.
It was manufactured content for clicks.
Interesting, but yes, over engineered.
Love it!
Next time, add four wheel drive ATV, 👍🏻
I like it with voice actors
Good video and awesome work on the voiceover. I'm trying to learn russian and, she's doing better than I am.
I personally enjoy the videos without voice over. The sounds are part of what makes the videos so enjoyable to watch. Voice not needed in your content.
glad i subscribed to your channel, always left wondering where i could come up with the hubs? awesome work, you have a very fabricating type of mind, think outside the box, not afraid to show mistakes!
Уникальная ситуация! Имея такие мозги, руки и можно сказать талант изобретателя не иметь минимум совести чтобы не насрать в чистом поле.
Вы сначала разберитесь , где почему и как высыпаны камни и грунт) Никто нигде не гадил
Bauschutt mitten auf die Wiese, Super. Da weißte Bescheid
You can start with the fact that this is not garbage , but stones and soil , and pits are filled in where the site will be leveled in the future
Voice is nice but in my opinion a Little Bit to slow. Thx 4 sharing ya ideas online 🎉
It is cute. I prefer with narration. I would also like to have an idea what you are making before wasting time watching something I might have no interest in.
Add some crates of beer to the trailer.
i would add a home depot trailer and save work and materials.
Hi, i like your Videos and ideas. But always miss a voice. So hope your wife will talk more and give your ideas a voice.
If you had moved the box of the trailer a little farther forward you would have more weight on the pulling vehicle for traction and the deck at the rear when dumping would have been higher, meaning more load would slide out before pulling forward. The trick is to balance the weight so you don't overload the pulling vehicle.
I've been thinking about it. But in this case, my manual unloading system based on a lever will most likely no longer work, since it is necessary to make a much greater effort to unload
Правильно весь мусор в поле , наследие детям своим ! Нехорошо дядя !
You can start with the fact that this is not garbage , but stones and soil , and pits are filled in where the site will be leveled in the future
Акцент житомирський у ведучої😊
Good build but it still needs bigger tires.
Good job, everything broke down when you litter the trash in the nature!😢
Looks like a lot of work, when you can buy a trailer that will do the same job at a reasonable price.
Yeah true but then you would not feel like a real man and build something with your hands like men do. !!!!!! He put a lot of time and effort into building this and was proud of working with his hands and not just another lazy rich entitled smart ass !!!!!
You're obviously a skilled man & I only wish I knew how to do some of that metalwork & welding...... you really made quite a nice
piece. I'd have preferred to hear your voice thru this process(s) along w/ what you were thinking as you dealt w/ the many things
that pop up. The oriental woman(AI) was the weakest part of this video.... I think most folks would like to hear what you thought
as you did each step ; your thoughts, concerns, and why you did the things you did.... Yep, I'd liked to have heard you speak.
It's warmer & more personable that way & people can relate much better knowing someone's home on the other side. peace
I don't actually know the song, but I hummed 2 turntables and a microphone while I watched.
👌👍😉! 1A!
I was surprised and scared by little son revving the vehicle.
maybe a thicker axle and wider tires...the axle is a maybe...but wider tires would be a huge improvement
It's good to hear narration; however, it could limit your audience to English speakers.
You have a lot of safety concerns to address, especially with the kids. It's great to have them involved, but when the little one jumped up there on the driver seat while the vehicle was running, could get you into a huge amount of trouble. Please be careful.
voice is a good idea and this is a pretty voice. you may use it also as AI voice with better english :)
👍👍👍👍👍🫵🪨 I wouldn’t add anything it looks great. You did a really good job and I like it that somebody does the voiceover for you. I don’t like it when someone builds something and I don’t explain anything at all.
The thing from the thumbnail I was trying to guess what it is
A bike rack for a place where people don't steel
A anti Vehicle blocker
would have used 4-wheeler tires and bearings instead of the other tires and would have made longer handle for dump and made box out of metal or aluminum....
only thing i saw was if you used wood for the flooring then the yellow bar that tilts it up needs a metal plate just by leaving it outside for a year would make the flooring soft enough to start giving you problems with the yellow bar going through the floor of the trailer other than that i see nothing wrong but i've always been that person that my equipment has to last me 10 years so say i bought a trailer it have to last a good ten years and make me money before i say it a good product i took a old mobile home frame and made a equipment hauler for my dad but ive also took a 22 foot box truck and made it a mobile home truck by time i was done the truck was 19 feet long total instead of about 26 feet long with the box truck on it so i sold the box off the back to design the bed of the truck i short the farm of the truck and had that truck for over 10 years hauling mobile homes i did this when i was alot younger so i did have a welder friend of the family and own his own welding business i was learning from him how to weld so back in the 80's i made a nice grated floor bed for the truck and designed the side to come of for easy loading and unloading of martials we finally retired the business in 2010 we started when i was 5 years old of the business first truck we had was a old chevy truck it lasted about 2 years then we bought a old international loadstar lasted 5 years then we built this one over the last two years of the international life so we got a good 15 years out of that truck the last 5 years she showed he age abit
Like the voiceover person
A few key words I like to hear say
Wunderbar
Und start D show
any lines from Shreks The 3 little pigs
Without voice👍
Ma questo genio scarica le macerie nei campi?
Hello
First, your wife's English is excellent. Not an easy language to learn and she did wonderfully well. Second, once I got used to it, it was okay but I usually prefer unnarrated videos with captions.
Thank you sir! For your high assessment, my wife was very worried that her English sounded bad!
@@hand_craft Her English is awesome.
I HATE it when you got to watch the thing to the end to see what is being made.
Really? Do you also hate having to watch a movie all the way through to know how it ends? UA-cam is for entertainment purposes. Showing you the ending at the beginning defeats the purpose. Also, you have the ability to skip forward it's really easy. There are videos on UA-cam that explain how to do it. Fair warning you have to watch the entire video unless you already know the first steps in which case why are you watching the video?
You can fast forward to hear the end. Be smarter.
Me too.
You can skip anything with the cursor
Playback speed can be changed in settings, or just slide the red line to the end like I did.
To avoid watching the entire video use the bottom red dot and slide to the end.
Good job daddy 0🤣😂😅
The female voice over while a man is working is throwing me off BIG TIMES lol
Nice job but get you a rivet gun attachment for your cordless drill! I bought one cheap online and have thrown all my hand rivet guns away!
A lot of work for something you can buy at harbor freight for $150 and works better!
Строительный мусор вываливать где попало!? Кто вы после этого?
You can start with the fact that this is not garbage , but stones and soil , and pits are filled in where the site will be leveled in the future
Rivets?
Next
What's the problem with the rivets?
While I always respect re-using left over materials crafting the pivots seems like a lot of wasted time and effort. Using two pillow block bearings and a pass-through axle would have been much easier and can be done with no welding, (if you were to consider many people might like to do this and don't own a welder). In fact if you included risers the pivot could be done at the wheels axle.
Even so, I did upvote this video.